Single_Phase_Fully_Controlled_Bridge_Rectifier Expriment:
Input Value :
U1 = 100*sqrt(2)V ; Frequency : 50Hz
R = 5Ω;
E = 60V
First Series Expriment:( Carry R Load Only )
According to the distinction of the Resistor, we could know that the waveform of both the R's Voltage & current is quite identical, thus for which we could just use one specific waveform to express the both.
So we differ the phase delay( Alpha = 60 & Alpha = 120 Respectively ), what could we get is the different Average value of the output, which means that we could control the output voltage via modulating the Alpha Degree or the Trigger Pulse.
Second Series Expriment:( RL Load )
Input Value :
U1 = 100*sqrt(2)V ; Frequency : 50Hz
R = 5Ω;
E = 60V
First Series Expriment:( Carry R Load Only )
According to the distinction of the Resistor, we could know that the waveform of both the R's Voltage & current is quite identical, thus for which we could just use one specific waveform to express the both.
So we differ the phase delay( Alpha = 60 & Alpha = 120 Respectively ), what could we get is the different Average value of the output, which means that we could control the output voltage via modulating the Alpha Degree or the Trigger Pulse.
Second Series Expriment:( RL Load )
For A ideal Inductor, which could continue the output current, shall be within no decreasing & increasing Energy.( Although the Inductor itself may suffer sudden voltage change ) So we could see clearly that the output is becoming continuous and the output Voltage within negative part which is caused by the Big Inductor.
本实验探讨了单相全桥可控整流器的工作原理及特性。输入电压为100*sqrt(2)V,频率50Hz,负载电阻5Ω,直流侧电压60V。通过改变触发角α(60°与120°),实现了输出电压的有效调节。实验还对比了纯阻性负载与阻感性负载下整流器的输出特性。
857

被折叠的 条评论
为什么被折叠?



