Spring笔记

本文深入解析Spring框架的核心概念,包括依赖注入、面向切面编程、事务管理等关键特性,阐述其如何简化Java EE应用开发,提升代码质量和维护效率。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

概述

Spring 是分层的 Java SE/EE 应用 full-stack 轻量级开源框架,以 IoC(Inverse Of Control:反转控制)和 AOP(Aspect Oriented Programming:面向切面编程)为内核,提供了展现层 SpringMVC 和持久层 Spring JDBC 以及业务层事务管理等众多的企业级应用技术,还能整合开源世界众多著名的第三方框架和类库,逐渐成为使用最多的 Java EE 企业应用开源框架。

优势

方便解耦,简化开发
通过 Spring 提供的 IoC 容器,可以将对象间的依赖关系交由 Spring 进行控制,避免硬编码所造成的过度程序耦合。用户也不必再为单例模式类、属性文件解析等这些很底层的需求编写代码,可以更专注于上层的应用。
AOP 编程的支持
通过 Spring 的 AOP 功能,方便进行面向切面的编程,许多不容易用传统 OOP 实现的功能可以通过AOP轻松应付
声明式事务的支持
可以将我们从单调烦闷的事务管理代码中解脱出来,通过声明式方式灵活的进行事务的管理,提高开发效率和质量。
方便程序的测试
可以用非容器依赖的编程方式进行几乎所有的测试工作,测试不再是昂贵的操作,而是随手可做的事情。
方便集成各种优秀框架
Spring 可以降低各种框架的使用难度,提供了对各种优秀框架( Struts、 Hibernate、 Hessian、 Quartz等)的直接支持。
降低 JavaEE API 的使用难度
Spring 对 JavaEE API(如 JDBC、 JavaMail、远程调用等)进行了薄薄的封装层,使这些 API 的使用难度大为降低。
Java 源码是经典学习范例
Spring 的源代码设计精妙、结构清晰、匠心独用,处处体现着大师对 Java 设计模式灵活运用以及对 Java 技术的高深造诣。它的源代码无意是 Java 技术的最佳实践的范例。

IOC的概念和作用

程序的耦合和解耦
耦合性(Coupling),也叫耦合度,是对模块间关联程度的度量。耦合的强弱取决于模块间接口的复杂性、调用模块的方式以及通过界面传送数据的多少。模块间的耦合度是指模块之间的依赖关系,包括控制关系、调用关系、数据传递关系。模块间联系越多,其耦合性越强,同时表明其独立性越差( 降低耦合性,可以提高其独立性)。 耦合性存在于各个领域,而非软件设计中独有的,但是我们只讨论软件工程中的耦合。
在软件工程中, 耦合指的就是就是对象之间的依赖性。对象之间的耦合越高,维护成本越高。因此对象的设计应使类和构件之间的耦合最小。 软件设计中通常用耦合度和内聚度作为衡量模块独立程度的标准。 划分模块的一个准则就是高内聚低耦合
它有如下分类:
(1) 内容耦合。当一个模块直接修改或操作另一个模块的数据时,或一个模块不通过正常入口而转入另一个模块时,这样的耦合被称为内容耦合。内容耦合是最高程度的耦合,应该避免使用之。
(2) 公共耦合。两个或两个以上的模块共同引用一个全局数据项,这种耦合被称为公共耦合。在具有大量公共耦合的结构中,确定究竟是哪个模块给全局变量赋了一个特定的值是十分困难的。
(3) 外部耦合 。一组模块都访问同一全局简单变量而不是同一全局数据结构,而且不是通过参数表传递该全局变量的信息,则称之为外部耦合。
(4) 控制耦合 。一个模块通过接口向另一个模块传递一个控制信号,接受信号的模块根据信号值而进行适当的动作,这种耦合被称为控制耦合。
(5) 标记耦合 。若一个模块 A 通过接口向两个模块 B 和 C 传递一个公共参数,那么称模块 B 和 C 之间存在一个标记耦合。
(6) 数据耦合。模块之间通过参数来传递数据,那么被称为数据耦合。数据耦合是最低的一种耦合形式,系统中一般都存在这种类型的耦合,因为为了完成一些有意义的功能,往往需要将某些模块的输出数据作为另一些模块的输入数据。
(7) 非直接耦合 。两个模块之间没有直接关系,它们之间的联系完全是通过主模块的控制和调用来实现的。
总结:
耦合是影响软件复杂程度和设计质量的一个重要因素,在设计上我们应采用以下原则:如果模块间必须存在耦合,就尽量使用数据耦合,少用控制耦合,限制公共耦合的范围,尽量避免使用内容耦合。
内聚与耦合
内聚标志一个模块内各个元素彼此结合的紧密程度,它是信息隐蔽和局部化概念的自然扩展。 内聚是从功能角度来度量模块内的联系,一个好的内聚模块应当恰好做一件事。它描述的是模块内的功能联系。耦合是软件结构中各模块之间相互连接的一种度量,耦合强弱取决于模块间接口的复杂程度、进入或访问一个模块的点以及通过接口的数据。 程序讲究的是低耦合,高内聚。就是同一个模块内的各个元素之间要高度紧密,但是各个模块之间的相互依存度却要不那么紧密。
内聚和耦合是密切相关的,同其他模块存在高耦合的模块意味着低内聚,而高内聚的模块意味着该模块同其他模块之间是低耦合。在进行软件设计时,应力争做到高内聚,低耦合。
工厂模式解耦
在实际开发中我们可以把三层的对象都使用配置文件配置起来,当启动服务器应用加载的时候, 让一个类中的方法通过读取配置文件,把这些对象创建出来并存起来。在接下来的使用的时候,直接拿过来用就好了。
那么,这个读取配置文件, 创建和获取三层对象的类就是工厂。
控制反转-Inversion Of Control
解耦的思路有两个问题:
1、存哪去?
分析:由于我们是很多对象,肯定要找个集合来存。这时候有 Map 和 List 供选择。
到底选 Map 还是 List 就看我们有没有查找需求。有查找需求,选 Map。
所以我们的答案就是在应用加载时,创建一个 Map,用于存放三层对象。
我们把这个 map 称之为容器。
2、还是没解释什么是工厂?
工厂就是负责给我们从容器中获取指定对象的类。这时候我们获取对象的方式发生了改变。
原来:
我们在获取对象时,都是采用 new 的方式。 是主动的。
现在:
我们获取对象时,同时跟工厂要,有工厂为我们查找或者创建对象。 是被动的。
这种被动接收的方式获取对象的思想就是控制反转,它是 spring 框架的核心之一。
明确 ioc 的作用:
削减计算机程序的耦合(解除我们代码中的依赖关系)。

使用 spring 的 IOC 解决程序耦合

第一步:拷贝必备的 jar 包到工程的 lib 目录中
第二步:在类的根路径下创建一个任意名称的 xml 文件(不能是中
文)
给配置文件导入约束:
/spring-framework-5.0.2.RELEASE/docs/spring-framework-reference/html5/core.html

    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd">
    </beans>

第三步: 让 spring 管理资源,在配置文件中配置 service和dao

<!-- bean 标签:用于配置让 spring 创建对象,并且存入 ioc 容器之中
id 属性:对象的唯一标识。
class 属性:指定要创建对象的全限定类名
-->
<!-- 配置 service -->
<bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl">
</bean>
<!-- 配置 dao -->
<bean id="accountDao" class="com.xxxxx.dao.impl.AccountDaoImpl"></bean>

测试配置是否成功

public class Client {
/**
* 使用 main 方法获取容器测试执行
*/
	public static void main(String[] args) {
		//1.使用 ApplicationContext 接口,就是在获取 spring 容器
		ApplicationContext ac = new ClassPathXmlApplicationContext("bean.xml");
		//2.根据 bean 的 id 获取对象
		IAccountService aService = (IAccountService) ac.getBean("accountService");
		System.out.println(aService);
		IAccountDao aDao = (IAccountDao) ac.getBean("accountDao");
		System.out.println(aDao);
	}
}

Spring基于XML的IOC细节

BeanFactory 和 ApplicationContext 的区别
BeanFactory 才是 Spring 容器中的顶层接口。
ApplicationContext 是它的子接口。
区别:
创建对象的时间点不一样。
ApplicationContext:只要一读取配置文件,默认情况下就会创建对象。
BeanFactory:什么使用什么时候创建对象。

ApplicationContext 接口的实现类

ClassPathXmlApplicationContext:
它是从类的根路径下加载配置文件 推荐使用这种
FileSystemXmlApplicationContext:
它是从磁盘路径上加载配置文件,配置文件可以在磁盘的任意位置。
AnnotationConfigApplicationContext:
当我们使用注解配置容器对象时,需要使用此类来创建 spring 容器。它用来读取注解。

IOC 中 bean 标签和管理对象细节
bean 标签
作用:
用于配置对象让 spring 来创建的。
默认情况下它调用的是类中的无参构造函数。如果没有无参构造函数则不能创建成功。
属性:
id: 给对象在容器中提供一个唯一标识。用于获取对象。
class: 指定类的全限定类名。用于反射创建对象。默认情况下调用无参构造函数。
scope: 指定对象的作用范围。

  • singleton :默认值,单例的.
  • prototype :多例的.
  • request :WEB 项目中,Spring 创建一个 Bean 的对象,将对象存入到 request 域中.
  • session :WEB 项目中,Spring 创建一个 Bean 的对象,将对象存入到 session 域中.
  • global session :WEB 项目中,应用在 Portlet 环境.如果没有 Portlet 环境那么
    globalSession 相当于 session.
    init-method: 指定类中的初始化方法名称。
    destroy-method: 指定类中销毁方法名称。

bean 的作用范围和生命周期
单例对象: scope=“singleton”
一个应用只有一个对象的实例。它的作用范围就是整个引用。
生命周期:
对象出生:当应用加载,创建容器时,对象就被创建了。
对象活着:只要容器在,对象一直活着。
对象死亡:当应用卸载,销毁容器时,对象就被销毁了。
多例对象: scope=“prototype”
每次访问对象时,都会重新创建对象实例。
生命周期:
对象出生:当使用对象时,创建新的对象实例。
对象活着:只要对象在使用中,就一直活着。
对象死亡:当对象长时间不用时,被 java 的垃圾回收器回收了。

实例化 Bean 的三种方式
第一种方式:使用默认无参构造函数

    <!--在默认情况下:
    它会根据默认无参构造函数来创建类对象。如果 bean 中没有默认无参构造函数,将会创建失败。
    -->
    <bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl"/>

第二种方式: spring 管理静态工厂-使用静态工厂的方法创建对象

/**
* 模拟一个静态工厂,创建业务层实现类
*/
public class StaticFactory {
	public static IAccountService createAccountService(){
		return new AccountServiceImpl();
	}
}
<!-- 此种方式是:
使用 StaticFactory 类中的静态方法 createAccountService 创建对象,并存入 spring 容器
id 属性:指定 bean 的 id,用于从容器中获取
class 属性:指定静态工厂的全限定类名
factory-method 属性:指定生产对象的静态方法
-->
<bean id="accountService" class="com.xxxxx.factory.StaticFactory" factory-method="createAccountService"></bean>

第三种方式: spring 管理实例工厂-使用实例工厂的方法创建对象

/**
* 模拟一个实例工厂,创建业务层实现类
* 此工厂创建对象,必须现有工厂实例对象,再调用方法
*/
public class InstanceFactory {
	public IAccountService createAccountService(){
		return new AccountServiceImpl();
	}
}
<!-- 此种方式是:
先把工厂的创建交给 spring 来管理。
然后在使用工厂的 bean 来调用里面的方法
factory-bean 属性:用于指定实例工厂 bean 的 id。
factory-method 属性:用于指定实例工厂中创建对象的方法。
-->
<bean id="instancFactory" class="com.xxxxx.factory.InstanceFactory"></bean>
<bean id="accountService" factory-bean="instancFactory" factory-method="createAccountService"></bean>

Spring的依赖注入

依赖注入的概念
依赖注入: Dependency Injection。 它是 spring 框架核心 ioc 的具体实现。
我们的程序在编写时, 通过控制反转, 把对象的创建交给了 spring,但是代码中不可能出现没有依赖的情况。
ioc 解耦只是降低他们的依赖关系,但不会消除。 例如:我们的业务层仍会调用持久层的方法。
那这种业务层和持久层的依赖关系, 在使用 spring 之后, 就让 spring 来维护了。
简单的说,就是坐等框架把持久层对象传入业务层,而不用我们自己去获取。
构造函数注入
顾名思义,就是使用类中的构造函数,给成员变量赋值。注意,赋值的操作不是我们自己做的,而是通过配置的方式,让 spring 框架来为我们注入。具体代码如下:

/**
*/
public class AccountServiceImpl implements IAccountService {
	private String name;
	private Integer age;
	private Date birthday;
	public AccountServiceImpl(String name, Integer age, Date birthday) {
		this.name = name;
		this.age = age;
		this.birthday = birthday;
	}
	@Override
	public void saveAccount() {
		System.out.println(name+","+age+","+birthday);
	}
}
<!-- 使用构造函数的方式,给 service 中的属性传值
要求:
	类中需要提供一个对应参数列表的构造函数。
涉及的标签:
constructor-arg
属性:
	index:指定参数在构造函数参数列表的索引位置
	type:指定参数在构造函数中的数据类型
	name:指定参数在构造函数中的名称 用这个找给谁赋值
=======上面三个都是找给谁赋值,下面两个指的是赋什么值的==============
	value:它能赋的值是基本数据类型和 String 类型
	ref:它能赋的值是其他 bean 类型,也就是说,必须得是在配置文件中配置过的 bean
-->
<bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl">
	<constructor-arg name="name" value="张三"></constructor-arg>
	<constructor-arg name="age" value="18"></constructor-arg>
	<constructor-arg name="birthday" ref="now"></constructor-arg>
</bean>
<bean id="now" class="java.util.Date"></bean>

set 方法注入
顾名思义,就是在类中提供需要注入成员的 set 方法。具体代码如下:

/** */
public class AccountServiceImpl implements IAccountService {
	private String name;
	private Integer age;
	private Date birthday;
	public void setName(String name) {
		this.name = name;
	}
	public void setAge(Integer age) {
		this.age = age;
	}
	public void setBirthday(Date birthday) {
		this.birthday = birthday;
	}
	@Override
	public void saveAccount() {
		System.out.println(name+","+age+","+birthday);
	}
}
<!-- 通过配置文件给 bean 中的属性传值:使用 set 方法的方式
涉及的标签:
property
属性:
name:找的是类中 set 方法后面的部分
ref:给属性赋值是其他 bean 类型的
value:给属性赋值是基本数据类型和 string 类型的
实际开发中,此种方式用的较多。
-->
<bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl">
	<property name="name" value="test"></property>
	<property name="age" value="21"></property>
	<property name="birthday" ref="now"></property>
</bean>
<bean id="now" class="java.util.Date"></bean>

使用 p 名称空间注入数据(本质还是调用 set 方法)
此种方式是通过在 xml 中导入 p 名称空间,使用 p:propertyName 来注入数据,它的本质仍然是调用类中的set 方法实现注入功能。
Java 类代码:

/**
* 使用 p 名称空间注入,本质还是调用类中的 set 方法
*/
public class AccountServiceImpl4 implements IAccountService {
	private String name;
	private Integer age;
	private Date birthday;
	public void setName(String name) {
		this.name = name;
	}
	public void setAge(Integer age) {
		this.age = age;
	}
	public void setBirthday(Date birthday) {
		this.birthday = birthday;
	}
	@Override
	public void saveAccount() {
		System.out.println(name+","+age+","+birthday);
	}
}

配置文件

<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:p="http://www.springframework.org/schema/p"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation=" http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd">
<bean id="accountService"
class="com.itheima.service.impl.AccountServiceImpl4"
p:name="test" p:age="21" p:birthday-ref="now"/>
</beans>

注入集合属性
顾名思义,就是给类中的集合成员传值,它用的也是set方法注入的方式,只不过变量的数据类型都是集合。
我们这里介绍注入数组, List,Set,Map,Properties。具体代码如下:

/***/
public class AccountServiceImpl implements IAccountService {
	private String[] myStrs;
	private List<String> myList;
	private Set<String> mySet;
	private Map<String,String> myMap;
	private Properties myProps;
	public void setMyStrs(String[] myStrs) {
		this.myStrs = myStrs;
	}
	public void setMyList(List<String> myList) {
		this.myList = myList;
	}
	public void setMySet(Set<String> mySet) {
		this.mySet = mySet;
	}
	public void setMyMap(Map<String, String> myMap) {
		this.myMap = myMap;
	}
	public void setMyProps(Properties myProps) {
		this.myProps = myProps;
	}
	@Override
	public void saveAccount() {
		System.out.println(Arrays.toString(myStrs));
		System.out.println(myList);
		System.out.println(mySet);
		System.out.println(myMap);
		System.out.println(myProps);
	}
}
<!-- 注入集合数据
List 结构的:
array,list,set
Map 结构的
map,entry,props,prop
-->
<bean id="accountService" class="com.itheima.xxxxx.impl.AccountServiceImpl">
<!-- 在注入集合数据时,只要结构相同,标签可以互换 -->
<!-- 给数组注入数据 -->
<property name="myStrs">
	<set>
		<value>AAA</value>
		<value>BBB</value>
		<value>CCC</value>
	</set>
</property>
<!-- 注入 list 集合数据 -->
<property name="myList">
	<array>
		<value>AAA</value>
		<value>BBB</value>
		<value>CCC</value>
	</array>
</property>
<!-- 注入 set 集合数据 -->
<property name="mySet">
	<list>
		<value>AAA</value>
		<value>BBB</value>
		<value>CCC</value>
	</list>
</property>
<!-- 注入 Map 数据 -->
<property name="myMap">
	<props>
		<prop key="testA">aaa</prop>
		<prop key="testB">bbb</prop>
	</props>
</property>
<!-- 注入 properties 数据 -->
<property name="myProps">
	<map>
		<entry key="testA" value="aaa"></entry>
		<entry key="testB">
			<value>bbb</value>
		</entry>
	</map>
</property>
</bean>

基于注解的IOC配置

使用@Component 注解配置管理的资源

@Component("accountService")
public class AccountServiceImpl implements IAccountService {
	private IAccountDao accountDao;
	public void setAccountDao(IAccountDao accountDao) {
		this.accountDao = accountDao;
	}
}
/**
* 账户的持久层实现类
*/
@Component("accountDao")
public class AccountDaoImpl implements IAccountDao {
	private DBAssit dbAssit;
}

使用注解注入时,不用写set方法

创建 spring 的 xml 配置文件并开启对注解的支持
基于注解整合时,导入约束时需要多导入一个 context 名称空间下的约束。
由于使用了注解配置,此时不能在继承 JdbcDaoSupport。

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
	xmlns:context="http://www.springframework.org/schema/context"
	xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:schemaLocation="http://www.springframework.org/schema/beans
	http://www.springframework.org/schema/beans/spring-beans.xsd
	http://www.springframework.org/schema/context
	http://www.springframework.org/schema/context/spring-context.xsd">
<!-- 告知 spring 创建容器时要扫描的包 -->
	<context:component-scan base-package="com.itheima"></context:component-scan>
<!-- 配置 dbAssit -->
	<bean id="dbAssit" class="com.itheima.dbassit.DBAssit">
		<property name="dataSource" ref="dataSource"></property>
	</bean>
<!-- 配置数据源 -->
	<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
		<property name="driverClass" value="com.mysql.jdbc.Driver"></property>
		<property name="jdbcUrl" value="jdbc:mysql:///spring_day02"></property>
		<property name="user" value="root"></property>
		<property name="password" value="1234"></property>
	</bean>
</beans>

常用注解

@Component
作用:
把资源让 spring 来管理。相当于在 xml 中配置一个 bean。
属性:
value:指定 bean 的 id。如果不指定 value 属性,默认 bean 的 id 是当前类的类名。首字母小写。
@Controller @Service @Repository
他们三个注解都是针对@Component的衍生注解,他们的作用及属性都是一模一样的。
他们只不过是提供了更加明确的语义化。
@Controller: 一般用于表现层的注解。
@Service: 一般用于业务层的注解。
@Repository: 一般用于持久层的注解。
细节:如果注解中有且只有一个属性要赋值时,且名称是 value, value 在赋值是可以不写。

@Autowired
作用:
自动按照类型注入。当使用注解注入属性时, set 方法可以省略。它只能注入其他 bean 类型。当有多个类型匹配时,使用要注入的对象变量名称作为 bean 的 id,在 spring 容器查找,找到了也可以注入成功。找不到就报错。
@Qualifier
作用:
在自动按照类型注入的基础之上,再按照 Bean 的 id 注入。它在给字段注入时不能独立使用,必须和@Autowire 一起使用;但是给方法参数注入时,可以独立使用,为方法参数指定对应parameter。
属性:
value:指定 bean 的 id。
@Resource
作用:
直接按照 Bean 的 id 注入。它也只能注入其他 bean 类型。
属性:
name:指定 bean 的 id。
@Value
作用:
注入基本数据类型和 String 类型数据的
属性:
value:用于指定值
@Scope
作用:
指定 bean 的作用范围。
属性:
value:指定范围的值。
取值: singleton prototype request session globalsession

@PostConstruct
作用:
用于指定初始化方法。
@PreDestroy
作用:
用于指定销毁方法。

关于 Spring 注解和 XML 的选择问题
注解的优势:
配置简单,维护方便
XML 的优势:
修改时,不用改源码。不涉及重新编译和部署。
Spring管理bean方式的比较

基于xml配置基于注解配置
bean定义<bean id="..." class="..."/>@Component衍生类
bean名称通过id或name指定@Component(“person”)
bean注入<property>或者p命名空间@Autowired按类型注入,@Qualifier按名称注入
生命周期,bean作用范围init-method destroy-method 范围 scope属性@PostConstruct初始化 @PreDestroy销毁 @Scope设置作用范围
适合场景bean来自第三方,使用其他jar包bean实现类由用户自己开发

spring 管理对象细节
基于注解的 spring IoC 配置中, bean 对象的特点和基于 XML 配置是一模一样的。

spring 的纯注解配置

@Configuration
作用:
用于指定当前类是一个 spring 配置类, 当创建容器时会从该类上加载注解。 获取容器时需要使用AnnotationApplicationContext(有@Configuration 注解的类.class)。
属性:
value:用于指定配置类的字节码
示例代码:

/**
* spring 的配置类,相当于 bean.xml 文件
*/
@Configuration
	public class SpringConfiguration {
}

@ComponentScan
作用:
用于指定 spring 在初始化容器时要扫描的包。 作用和在 spring 的 xml 配置文件中的:
<context:component-scan base-package="com.itheima"/>是一样的。
属性:
basePackages:用于指定要扫描的包。和该注解中的 value 属性作用一样。
示例代码:

/**
* spring 的配置类,相当于 bean.xml 文件
*/
@Configuration
@ComponentScan("com.xxxxx")
public class SpringConfiguration {
}

@Bean
作用:
该注解只能写在方法上,表明使用此方法创建一个对象,并且放入 spring 容器。
属性:
name:给当前@Bean 注解方法创建的对象指定一个名称(即 bean 的 id)。
示例代码:

/**
* 连接数据库的配置类
*/
public class JdbcConfig {
	/**
	* 创建一个数据源,并存入 spring 容器中
	* @return
	*/
	@Bean(name="dataSource")
	public DataSource createDataSource() {
		try {
			ComboPooledDataSource ds = new ComboPooledDataSource();
			ds.setUser("root");
			ds.setPassword("1234");
			ds.setDriverClass("com.mysql.jdbc.Driver");
			ds.setJdbcUrl("jdbc:mysql:///spring_day02");
			return ds;
		} catch (Exception e) {
			throw new RuntimeException(e);
		}
	}
	/**
	* 创建一个 DBAssit,并且也存入 spring 容器中
	* @param dataSource
	* @return
	*/
	@Bean(name="dbAssit")
	public DBAssit createDBAssit(DataSource dataSource) {
		return new DBAssit(dataSource);
	}
}

@PropertySource
作用:
用于加载.properties 文件中的配置。例如配置数据源时,可以把连接数据库的信息写到properties 配置文件中,就可以使用此注解指定properties 配置文件的位置。
属性:
value[]:用于指定 properties 文件位置。如果是在类路径下,需要写上 classpath:
示例代码:
配置:

/**
* 连接数据库的配置类
* @Version 1.0
*/
public class JdbcConfig {
	@Value("${jdbc.driver}")
	private String driver;
	@Value("${jdbc.url}")
	private String url;
	@Value("${jdbc.username}")
	private String username;
	@Value("${jdbc.password}")
	private String password;
	/**
	* 创建一个数据源,并存入 spring 容器中
	* @return
	*/
	@Bean(name="dataSource")
	public DataSource createDataSource() {
		try {
		ComboPooledDataSource ds = new ComboPooledDataSource();
		ds.setDriverClass(driver);
		ds.setJdbcUrl(url);
		ds.setUser(username);
		ds.setPassword(password);
		return ds;
	} catch (Exception e) {
			throw new RuntimeException(e);
		}
	}
}

jdbc.properties 文件:
jdbc.driver=com.mysql.jdbc.Driver
jdbc.url=jdbc:mysql://localhost:3306/xxxxxx
jdbc.username=root
jdbc.password=1234

@Import
作用:
用于导入其他配置类,在引入其他配置类时,可以不用再写@Configuration 注解。 当然,写上也没问题。
属性:
value[]:用于指定其他配置类的字节码。
示例代码:

@Configuration
@ComponentScan(basePackages = "com.xxxxx.spring")
@Import({ JdbcConfig.class})
public class SpringConfiguration {
}
@Configuration
@PropertySource("classpath:jdbc.properties")
public class JdbcConfig{
}

通过注解获取容器:

ApplicationContext ac =new AnnotationConfigApplicationContext(SpringConfiguration.class);

Spring 整合 Junit

使用@RunWith 注解替换原有运行器

/**
* 测试类
*/
@RunWith(SpringJUnit4ClassRunner.class)
public class AccountServiceTest {
}

使用@ContextConfiguration 指定 spring 配置文件的位置

/**
* 测试类
*/
@RunWith(SpringJUnit4ClassRunner.class)
@ContextConfiguration(locations= {"classpath:bean.xml"})
public class AccountServiceTest {
}

@ContextConfiguration 注解:
locations 属性: 用于指定配置文件的位置。如果是类路径下,需要用 classpath:表明
classes 属性: 用于指定注解的类。当不使用 xml 配置时,需要用此属性指定注解类的位置。

使用@Autowired 给测试类中的变量注入数据

/**
* 测试类
*/
@RunWith(SpringJUnit4ClassRunner.class)
@ContextConfiguration(locations= {"classpath:bean.xml"})
public class AccountServiceTest {
@Autowired
private IAccountService as ;
}

为什么不把测试类配到 xml 中

配到 XML 中能不能用呢?
答案是肯定的,没问题,可以使用。
那么为什么不采用配置到 xml 中的方式呢?
这个原因是这样的:
第一:在 xml 中配置了一个 bean, spring 加载配置文件创建容器时,就会创建对象。
第二:测试类只是我们在测试功能时使用,而在项目中它并不参与程序逻辑,也不会解决需求上的问题,所以创建完了,并没有使用。那么存在容器中就会造成资源的浪费。
所以,基于以上两点,不应该把测试配置到 xml 文件中。

AOP 的相关概念

AOP 概述
AOP: 全称是 Aspect Oriented Programming 即: 面向切面编程。
简单的说它就是把我们程序重复的代码抽取出来,在需要执行的时候,使用动态代理的技术,在不修改源码的基础上,对我们的已有方法进行增强。
AOP 的作用及优势
作用:

在程序运行期间,不修改源码对已有方法进行增强。

优势:

减少重复代码
提高开发效率
维护方便

AOP 的实现方式

使用动态代理技术

Spring 中的 AOP

AOP 相关术语

Joinpoint(连接点):
所谓连接点是指那些被拦截到的点。在 spring 中,这些点指的是方法,因为 spring 只支持方法类型的连接点。
Pointcut(切入点):
所谓切入点是指我们要对哪些 Joinpoint 进行拦截的定义。
Advice(通知/增强):
所谓通知是指拦截到 Joinpoint 之后所要做的事情就是通知。
通知的类型: 前置通知,后置通知,异常通知,最终通知,环绕通知。
Introduction(引介):
引介是一种特殊的通知在不修改类代码的前提下, Introduction 可以在运行期为类动态地添加一些方法或 Field。
Target(目标对象):
代理的目标对象。
Weaving(织入):
是指把增强应用到目标对象来创建新的代理对象的过程。
spring 采用动态代理织入,而 AspectJ 采用编译期织入和类装载期织入。
Proxy(代理) :
一个类被 AOP 织入增强后,就产生一个结果代理类。
Aspect(切面):
是切入点和通知(引介)的结合。

基于 XML 的 AOP 配置

环境搭建

准备必要的代码
创建 spring 的配置文件并导入约束
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:aop="http://www.springframework.org/schema/aop"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop.xsd">
</beans>
配置 spring 的 ioc
<!-- 配置 service -->
<bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl">
<property name="accountDao" ref="accountDao"></property>
</bean>
<!-- 配置 dao -->
<bean id="accountDao" class="com.xxxxx.dao.impl.AccountDaoImpl">
<property name="dbAssit" ref="dbAssit"></property>
</bean>
<!-- 配置数据库操作对象 -->
<bean id="dbAssit" class="com.xxxxx.dbassit.DBAssit">
<property name="dataSource" ref="dataSource"></property>
<!-- 指定 connection 和线程绑定 -->
<property name="useCurrentConnection" value="true"></property>
</bean>
<!-- 配置数据源 -->
<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
<property name="driverClass" value="com.mysql.jdbc.Driver"></property>
<property name="jdbcUrl" value="jdbc:mysql:///spring"></property>
<property name="user" value="root"></property>
<property name="password" value="1234"></property>
</bean>
抽取公共代码制作成通知
/**
* 事务控制类
*/
public class TransactionManager {
	//定义一个 DBAssit
	private DBAssit dbAssit ;
	public void setDbAssit(DBAssit dbAssit) {
		this.dbAssit = dbAssit;
	}
	//开启事务
	public void beginTransaction() {
	try {
		dbAssit.getCurrentConnection().setAutoCommit(false);
	} catch (SQLException e) {
		e.printStackTrace();
		}
	}
	//提交事务
	public void commit() {
		try {
			dbAssit.getCurrentConnection().commit();
		} catch (SQLException e) {
			e.printStackTrace();
		}
	}
	//回滚事务
	public void rollback() {
		try {
			dbAssit.getCurrentConnection().rollback();
		} catch (SQLException e) {
			e.printStackTrace();
		}
	}
	//释放资源
	public void release() {
		try {
			dbAssit.releaseConnection();
		} catch (Exception e) {
			e.printStackTrace();
		}
	}
}

配置步骤

把通知类用 bean 标签配置起来
<!-- 配置通知 -->
<bean id="txManager" class="com.xxxxx.utils.TransactionManager">
<property name="dbAssit" ref="dbAssit"></property>
</bean>
使用 aop:config 声明 aop 配置

aop:config:
作用: 用于声明开始 aop 的配置

<aop:config>
<!-- 配置的代码都写在此处 -->
</aop:config>
使用 aop:aspect 配置切面

aop:aspect:
作用:
用于配置切面。
属性:
id: 给切面提供一个唯一标识。
ref: 引用配置好的通知类 bean 的 id。

<aop:aspect id="txAdvice" ref="txManager">
<!--配置通知的类型要写在此处-->
</aop:aspect>
使用 aop:pointcut 配置切入点表达式

aop:pointcut:
作用:
用于配置切入点表达式。就是指定对哪些类的哪些方法进行增强。
属性:
expression:用于定义切入点表达式。
id: 用于给切入点表达式提供一个唯一标识

<aop:pointcut expression="execution(
public void com.xxxxx.service.impl.AccountServiceImpl.transfer(java.lang.String, java.lang.String, java.lang.Float))" id="pt1"/>
使用 aop:xxx 配置对应的通知类型

aop:before
作用:
用于配置前置通知。 指定增强的方法在切入点方法之前执行
属性:
method:用于指定通知类中的增强方法名称
ponitcut-ref:用于指定切入点的表达式的引用
poinitcut:用于指定切入点表达式
执行时间点:
切入点方法执行之前执行

<aop:before method="beginTransaction" pointcut-ref="pt1"/>

aop:after-returning
作用:
用于配置后置通知
属性:
method: 指定通知中方法的名称。
pointcut: 定义切入点表达式
pointcut-ref: 指定切入点表达式的引用
执行时间点:
切入点方法正常执行之后。它和异常通知只能有一个执行

<aop:after-returning method="commit" pointcut-ref="pt1"/>

aop:after-throwing
作用:
用于配置异常通知
属性:
method: 指定通知中方法的名称。
pointct: 定义切入点表达式
pointcut-ref: 指定切入点表达式的引用
执行时间点:
切入点方法执行产生异常后执行。它和后置通知只能执行一个

<aop:after-throwing method="rollback" pointcut-ref="pt1"/>

aop:after
作用:
用于配置最终通知
属性:
method: 指定通知中方法的名称。
pointct: 定义切入点表达式
pointcut-ref: 指定切入点表达式的引用
执行时间点:
无论切入点方法执行时是否有异常,它都会在其后面执行。

<aop:after method="release" pointcut-ref="pt1"/>
切入点表达式说明

execution:匹配方法的执行(常用)
execution(表达式)
表达式语法: execution([修饰符] 返回值类型 包名.类名.方法名(参数))
写法说明:
全匹配方式:
public void com.xxxxx.service.impl.AccountServiceImpl.saveAccount(com.itheima.domain.Account)
访问修饰符可以省略
void
全通配方式:

* *..*.*(..)

通常情况下,都是对业务层的方法进行增强,所以切入点表达式都是切到业务层实现类。

execution(* com.xxxxx.service.impl.*.*(..))
环绕通知

配置方式:

<aop:config>
<aop:pointcut expression="execution(* com.xxxxxx.service.impl.*.*(..))" id="pt1"/>
<aop:aspect id="txAdvice" ref="txManager">
<!-- 配置环绕通知 -->
<aop:around method="transactionAround" pointcut-ref="pt1"/>
</aop:aspect>
</aop:config>

aop:around:
作用:
用于配置环绕通知
属性:
method:指定通知中方法的名称。
pointct:定义切入点表达式
pointcut-ref:指定切入点表达式的引用
说明:
它是 spring 框架为我们提供的一种可以在代码中手动控制增强代码什么时候执行的方式。
注意:
通常情况下,环绕通知都是独立使用的

/**
* 环绕通知
* @param pjp
* spring 框架为我们提供了一个接口: ProceedingJoinPoint,它可以作为环绕通知的方法参数。
* 在环绕通知执行时, spring 框架会为我们提供该接口的实现类对象,我们直接使用就行。
* @return
*/
public Object transactionAround(ProceedingJoinPoint pjp) {
	//定义返回值
	Object rtValue = null;
	try {
		//获取方法执行所需的参数
		Object[] args = pjp.getArgs();
		//前置通知:开启事务
		beginTransaction();
		//执行方法
		rtValue = pjp.proceed(args);
		//后置通知:提交事务
		commit();
	}catch(Throwable e) {
		//异常通知:回滚事务
		rollback();
		e.printStackTrace();
	}finally {
		//最终通知:释放资源
		release();
	}
	return rtValue;
}

基于注解的 AOP 配置

环境搭建

在配置文件中导入 context 的名称空间
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context.xsd">
<!-- 配置数据库操作对象 -->
<bean id="dbAssit" class="com.xxxxxx.dbassit.DBAssit">
<property name="dataSource" ref="dataSource"></property>
<!-- 指定 connection 和线程绑定 -->
<property name="useCurrentConnection" value="true"></property>
</bean>
<!-- 配置数据源 -->
<bean id="dataSource" class="com.mchange.v2.c3p0.ComboPooledDataSource">
<property name="driverClass" value="com.mysql.jdbc.Driver"></property>
<property name="jdbcUrl" value="jdbc:mysql:///spring"></property>
<property name="user" value="root"></property>
<property name="password" value="1234"></property>
</bean>
</beans>
把资源使用注解配置
/**
* 账户的业务层实现类
*/
@Service("accountService")
public class AccountServiceImpl implements IAccountService {
@Autowired
private IAccountDao accountDao;
}
/**
* 账户的持久层实现类
*/
@Repository("accountDao")
public class AccountDaoImpl implements IAccountDao {
@Autowired
private DBAssit dbAssit ;
}
在配置文件中指定 spring 要扫描的包
<!-- 告知 spring,在创建容器时要扫描的包 -->
<context:component-scan base-package="com.xxxxxx"></context:component-scan>

配置步骤

把通知类也使用注解配置
/**
* 事务控制类
*/
@Component("txManager")
public class TransactionManager {
//定义一个 DBAssit
@Autowired
private DBAssit dbAssit ;
}
在通知类上使用@Aspect 注解声明为切面

作用:
把当前类声明为切面类。

/**
* 事务控制类
*/
@Component("txManager")
@Aspect//表明当前类是一个切面类
public class TransactionManager {
//定义一个 DBAssit
@Autowired
private DBAssit dbAssit ;
}

在增强的方法上使用注解配置通知
@Before
作用:
把当前方法看成是前置通知。
属性:
value:用于指定切入点表达式,还可以指定切入点表达式的引用。
//开启事务
@Before("execution(* com.xxxxxx.service.impl.*.*(..))")
public void beginTransaction() {
	try {
		dbAssit.getCurrentConnection().setAutoCommit(false);
	} catch (SQLException e) {
		e.printStackTrace();
	}
}
@AfterReturning
作用:
把当前方法看成是后置通知。
属性:
value:用于指定切入点表达式,还可以指定切入点表达式的引用
//提交事务
@AfterReturning("execution(* com.xxxxxx.service.impl.*.*(..))")
public void commit() {
	try {
		dbAssit.getCurrentConnection().commit();
	} catch (SQLException e) {
		e.printStackTrace();
	}
}
@AfterThrowing
作用:
把当前方法看成是异常通知。
属性:
value:用于指定切入点表达式,还可以指定切入点表达式的引用
//回滚事务
@AfterThrowing("execution(* com.xxxxxxx.service.impl.*.*(..))")
public void rollback() {
	try {
		dbAssit.getCurrentConnection().rollback();
	} catch (SQLException e) {
		e.printStackTrace();
	}
}
@After
作用:
把当前方法看成是最终通知。
属性:
value:用于指定切入点表达式,还可以指定切入点表达式的引用
//释放资源
@After("execution(* com.xxxxxx.service.impl.*.*(..))")
public void release() {
	try {
		dbAssit.releaseConnection();
	} catch (Exception e) {
		e.printStackTrace();
	}
}
在 spring 配置文件中开启 spring 对注解 AOP 的支持
<!-- 开启 spring 对注解 AOP 的支持 -->
<aop:aspectj-autoproxy/>
环绕通知注解配置
@Around
作用:
把当前方法看成是环绕通知。
属性:
value:用于指定切入点表达式,还可以指定切入点表达式的引用。
/**
* 环绕通知
* @param pjp
* @return
*/
@Around("execution(* com.xxxxxx.service.impl.*.*(..))")
public Object transactionAround(ProceedingJoinPoint pjp) {
	//定义返回值
	Object rtValue = null;
	try {
	//获取方法执行所需的参数
		Object[] args = pjp.getArgs();
		//前置通知:开启事务
		beginTransaction();
		//执行方法
		rtValue = pjp.proceed(args);
		//后置通知:提交事务
		commit();
	}catch(Throwable e) {
	//异常通知:回滚事务
		rollback();
		e.printStackTrace();
	}finally {
		//最终通知:释放资源
		release();
	}
	return rtValue;
}
切入点表达式注解

@Pointcut
作用:
指定切入点表达式
属性:

value:指定表达式的内容

@Pointcut("execution(* com.xxxxxx.service.impl.*.*(..))")
private void pt1() {}
引用方式:
/**
* 环绕通知
* @param pjp
* @return
*/
@Around("pt1()")//注意:千万别忘了写括号
public Object transactionAround(ProceedingJoinPoint pjp) {
	//定义返回值
	Object rtValue = null;
	try {
		//获取方法执行所需的参数
		Object[] args = pjp.getArgs();
		//前置通知:开启事务
		beginTransaction();
		//执行方法
		rtValue = pjp.proceed(args);
		//后置通知:提交事务
		commit();
	}catch(Throwable e) {
		//异常通知:回滚事务
		rollback();
		e.printStackTrace();
	}finally {
		//最终通知:释放资源
		release();
	}
	return rtValue;
}
不使用 XML 的配置方式
@Configuration
@ComponentScan(basePackages="com.xxxxx")
@EnableAspectJAutoProxy
public class SpringConfiguration {
}

Spring 中的事务控制

Spring 事务控制需要明确

第一: JavaEE 体系进行分层开发,事务处理位于业务层, Spring 提供了分层设计业务层的事务处理解决方案。
第二: spring 框架为我们提供了一组事务控制的接口。这组接口是在spring-tx-5.0.2.RELEASE.jar 中。
第三: spring 的事务控制都是基于 AOP 的,它既可以使用编程的方式实现,也可以使用配置的方式实现。

Spring 中事务控制的 API 介绍

PlatformTransactionManager

此接口是 spring 的事务管理器,它里面提供了我们常用的操作事务的方法
在开发中都是使用它的实现类

真正管理事务的对象
org.springframework.jdbc.datasource.DataSourceTransactionManager 使用 Spring JDBC 或 iBatis 进行持久化数据时使用
org.springframework.orm.hibernate5.HibernateTransactionManager 使用 Hibernate 版本进行持久化数据时使用

事务的传播行为

REQUIRED: 如果当前没有事务,就新建一个事务,如果已经存在一个事务中,加入到这个事务中。一般的选择(默认值)
SUPPORTS: 支持当前事务,如果当前没有事务,就以非事务方式执行(没有事务)
MANDATORY:使用当前的事务,如果当前没有事务,就抛出异常
REQUERS_NEW: 新建事务,如果当前在事务中,把当前事务挂起。
NOT_SUPPORTED: 以非事务方式执行操作,如果当前存在事务,就把当前事务挂起
NEVER: 以非事务方式运行,如果当前存在事务,抛出异常
NESTED: 如果当前存在事务,则在嵌套事务内执行。如果当前没有事务,则执行 REQUIRED 类似的操作。

超时时间

默认值是-1,没有超时限制。如果有,以秒为单位进行设置。

是否是只读事务

建议查询时设置为只读。

基于 XML 的声明式事务控制

环境搭建

创建 spring 的配置文件并导入约束
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xsi:schemaLocation="http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/tx
http://www.springframework.org/schema/tx/spring-tx.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop.xsd">
</beans>
准备数据库表和实体类

创建数据库:
create database spring_day04;
use spring_day04;
创建表:
create table account(
id int primary key auto_increment,
name varchar(40),
money float
)character set utf8 collate utf8_general_ci;

/**
* 账户的实体
*/
public class Account implements Serializable {
	private Integer id;
	private String name;
	private Float money;
	public Integer getId() {
		return id;
	}
	public void setId(Integer id) {
		this.id = id;
	}
	public String getName() {
		return name;
	}
	public void setName(String name) {
		this.name = name;
	}
	public Float getMoney() {
		return money;
	}
	public void setMoney(Float money) {
		this.money = money;
	}
	@Override
	public String toString() {
		return "Account [id=" + id + ", name=" + name + ", money=" + money + "]";
	}
}
编写业务层接口和实现类
/**
* 账户的业务层接口
*/
public interface IAccountService {
	/**
	* 根据 id 查询账户信息
	* @param id
	* @return
	*/
	Account findAccountById(Integer id);//查
	/**
	* 转账
	* @param sourceName 转出账户名称
	* @param targeName 转入账户名称
	* @param money 转账金额
	*/
	void transfer(String sourceName,String targeName,Float money);//增删改
}
/**
* 账户的业务层实现类
*/
public class AccountServiceImpl implements IAccountService {
	private IAccountDao accountDao;
	public void setAccountDao(IAccountDao accountDao) {
		this.accountDao = accountDao;
	}
	@Override
	public Account findAccountById(Integer id) {
		return accountDao.findAccountById(id);
	}
	@Override
	public void transfer(String sourceName, String targeName, Float money) {
	//1.根据名称查询两个账户
		Account source = accountDao.findAccountByName(sourceName);
		Account target = accountDao.findAccountByName(targeName);
		//2.修改两个账户的金额
		source.setMoney(source.getMoney()-money);//转出账户减钱
		target.setMoney(target.getMoney()+money);//转入账户加钱
		//3.更新两个账户
		accountDao.updateAccount(source);
		int i=1/0;
		accountDao.updateAccount(target);
	}
}
编写 Dao 接口和实现类
/**
* 账户的持久层接口
*/
public interface IAccountDao {
	/**
	* 根据 id 查询账户信息
	* @param id
	* @return
	*/
	Account findAccountById(Integer id);
	/**
	* 根据名称查询账户信息
	* @return
	* /
	/**
	* 更新账户信息
	* @param account
	*/
	void updateAccount(Account account);
}
/**
* 账户的持久层实现类
* 此版本 dao,只需要给它的父类注入一个数据源
*/
public class AccountDaoImpl extends JdbcDaoSupport implements IAccountDao {
	@Override
	public Account findAccountById(Integer id) {
		List<Account> list = getJdbcTemplate().query("select * from account where
		id = ? ",new AccountRowMapper(),id);
		return list.isEmpty()?null:list.get(0);
	}
	@Override
	public Account findAccountByName(String name) {
		List<Account> list = getJdbcTemplate().query("select * from account where
		name = ? ",new AccountRowMapper(),name);
		if(list.isEmpty()){
			return null;
		}
		if(list.size()>1){
			throw new RuntimeException("结果集不唯一,不是只有一个账户对象");
		}
		return list.get(0);
	}
	@Override
	public void updateAccount(Account account) {
		getJdbcTemplate().update("update account set money = ? where id = ?",account.getMoney(),account.getId());
	}
}
/**
* 账户的封装类 RowMapper 的实现类
* */
public class AccountRowMapper implements RowMapper<Account>{
	@Override
	public Account mapRow(ResultSet rs, int rowNum) throws SQLException {
	Account account = new Account();
	account.setId(rs.getInt("id"));
	account.setName(rs.getString("name"));
	account.setMoney(rs.getFloat("money"));
	return account;
	}
}
在配置文件中配置业务层和持久层对象
<!-- 配置 service -->
<bean id="accountService" class="com.xxxxx.service.impl.AccountServiceImpl">
<property name="accountDao" ref="accountDao"></property>
</bean>
<!-- 配置 dao -->
<bean id="accountDao" class="com.xxxxx.dao.impl.AccountDaoImpl">
<!-- 注入 dataSource -->
<property name="dataSource" ref="dataSource"></property>
</bean>
<!-- 配置数据源 -->
<bean id="dataSource"
class="org.springframework.jdbc.datasource.DriverManagerDataSource">
<property name="driverClassName" value="com.mysql.jdbc.Driver"></property>
<property name="url" value="jdbc:mysql:///spring"></property>
<property name="username" value="root"></property>
<property name="password" value="1234"></property>
</bean>

配置步骤

配置事务管理器
<!-- 配置一个事务管理器 -->
<bean id="transactionManager"
class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
<!-- 注入 DataSource -->
<property name="dataSource" ref="dataSource"></property>
</bean>
配置事务的通知引用事务管理器
<!-- 事务的配置 -->
<tx:advice id="txAdvice" transaction-manager="transactionManager">
</tx:advice>
配置事务的属性
<!--在 tx:advice 标签内部 配置事务的属性 -->
<tx:attributes>
<!-- 指定方法名称:是业务核心方法
read-only:是否是只读事务。默认 false,不只读。
isolation:指定事务的隔离级别。默认值是使用数据库的默认隔离级别。
propagation:指定事务的传播行为。
timeout:指定超时时间。默认值为: -1。永不超时。
rollback-for:用于指定一个异常,当执行产生该异常时,事务回滚。产生其他异常,事务不回滚。
没有默认值,任何异常都回滚。
no-rollback-for:用于指定一个异常,当产生该异常时,事务不回滚,产生其他异常时,事务回
滚。没有默认值,任何异常都回滚。
-->
<tx:method name="*" read-only="false" propagation="REQUIRED"/>
<tx:method name="find*" read-only="true" propagation="SUPPORTS"/>
</tx:attributes>
配置 AOP 切入点表达式
<!-- 配置 aop -->
<aop:config>
<!-- 配置切入点表达式 -->
<aop:pointcut expression="execution(* com.xxxxx.service.impl.*.*(..))"
id="pt1"/>
</aop:config>
配置切入点表达式和事务通知的对应关系
<!-- 在 aop:config 标签内部: 建立事务的通知和切入点表达式的关系 -->
<aop:advisor advice-ref="txAdvice" pointcut-ref="pt1"/>

基于注解的配置方式

环境搭建

创建 spring 的配置文件导入约束并配置扫描的包
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:aop="http://www.springframework.org/schema/aop"
xmlns:tx="http://www.springframework.org/schema/tx"
xmlns:context="http://www.springframework.org/schema/context"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/aop
http://www.springframework.org/schema/aop/spring-aop.xsd
http://www.springframework.org/schema/tx
http://www.springframework.org/schema/tx/spring-tx.xsd
http://www.springframework.org/schema/context
http://www.springframework.org/schema/context/spring-context.xsd">
<!-- 配置 spring 创建容器时要扫描的包 -->
<context:component-scan base-package="com.xxxxxx"></context:component-scan>
<!-- 配置 JdbcTemplate-->
<bean id="jdbcTemplate" class="org.springframework.jdbc.core.JdbcTemplate">
<property name="dataSource" ref="dataSource"></property>
</bean>
<!-- 配置 spring 提供的内置数据源 -->
<bean id="dataSource"
class="org.springframework.jdbc.datasource.DriverManagerDataSource">
<property name="driverClassName"
value="com.mysql.jdbc.Driver"></property>
<property name="url"
value="jdbc:mysql://localhost:3306/spring"></property>
<property name="username" value="root"></property>
<property name="password" value="1234"></property>
</bean>
</beans>
创建数据库表和实体类
创建业务层接口和实现类并使用注解让 spring 管理
/**
* 账户的业务层实现类
*/
@Service("accountService")
public class AccountServiceImpl implements IAccountService {
@Autowired
private IAccountDao accountDao;
//其余代码和基于 XML 的配置相同
}
创建 Dao 接口和实现类并使用注解让 spring 管理
/**
* 账户的持久层实现类
*/
@Repository("accountDao")
public class AccountDaoImpl implements IAccountDao {
@Autowired
private JdbcTemplate jdbcTemplate;
//其余代码和基于 XML 的配置相同
}

配置步骤

配置事务管理器并注入数据源
<!-- 配置事务管理器 -->
<bean id="transactionManager"
class="org.springframework.jdbc.datasource.DataSourceTransactionManager">
<property name="dataSource" ref="dataSource"></property>
</bean>
在业务层使用@Transactional 注解
@Service("accountService")
@Transactional(readOnly=true,propagation=Propagation.SUPPORTS)
public class AccountServiceImpl implements IAccountService {
	@Autowired
	private IAccountDao accountDao;
	@Override
	public Account findAccountById(Integer id) {
		return accountDao.findAccountById(id);
	}
	@Override
	@Transactional(readOnly=false,propagation=Propagation.REQUIRED)
	public void transfer(String sourceName, String targeName, Float money) {
	//1.根据名称查询两个账户
	Account source = accountDao.findAccountByName(sourceName);
	Account target = accountDao.findAccountByName(targeName);
	//2.修改两个账户的金额
	source.setMoney(source.getMoney()-money);//转出账户减钱
	target.setMoney(target.getMoney()+money);//转入账户加钱
	//3.更新两个账户
	accountDao.updateAccount(source);
	//int i=1/0;
	accountDao.updateAccount(target);
	}
}

该注解的属性和 xml 中的属性含义一致。该注解可以出现在接口上,类上和方法上。
出现接口上,表示该接口的所有实现类都有事务支持。
出现在类上,表示类中所有方法有事务支持
出现在方法上,表示方法有事务支持。
以上三个位置的优先级:方法>类>接口

在配置文件中开启 spring 对注解事务的支持
<!-- 开启 spring 对注解事务的支持 -->
<tx:annotation-driven transaction-manager="transactionManager"/>

不使用 xml 的配置方式

@Configuration
@EnableTransactionManagement
public class SpringTxConfiguration {
//里面配置数据源,配置 JdbcTemplate,配置事务管理器。在之前的步骤已经写过了。
}
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值