利用数码管显示的时钟

这是一个使用数码管显示实时时钟的代码,通过定时器0和定时器1更新时间,并通过中断服务函数实现秒、分、小时的递增和显示更新。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >



下面是利用数码管显示的时钟的代码

#include <reg52.h>

#define SEGPORT P0

sbit seg_sel = P2^1;   
sbit bit_sel = P2^0;   

unsigned char segdata[10] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};
unsigned char bitdata[8] = {0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};
unsigned char disdata[8] = {0x3f,0x3f,0x40,0x3f,0x3f,0x40,0x03,0x03};   

unsigned char s = 20;
unsigned char m = 21;
unsigned char h = 12;

void display()
{
   static unsigned char i = 0;
 
   SEGPORT = 0x0;   
  seg_sel = 1;
  seg_sel = 0;
     
  SEGPORT = 0xff;
  bit_sel = 1;
  bit_sel = 0;
       
  SEGPORT = disdata[i];
  seg_sel = 1;
 &nb

利用数码管显示时钟的代码通常涉及以下几个步骤,这里以Arduino Uno平台为例,假设我们使用的是7段LED数码管: 1. **硬件准备**: - 连接数码管到Arduino的数字引脚,一般每个数码管需要7个引脚(包括公共端COM)。 - 如果有多个数码管并联,需要添加适当的上拉电阻。 2. **库导入**: ```cpp #include <LiquidCrystal.h> ``` 这里引入`LiquidCrystal`库用于控制数码管。 3. **初始化数码管**: ```cpp LiquidCrystal lcd(8, 9, 4, 5, 6, 7); // 对应数字I/O引脚 ``` 4. **定时器函数**: 使用`millis()`函数获取当前时间,并将其转换为小时、分钟和秒。 ```cpp void clockDisplay() { long currentMillis = millis(); int hours = (currentMillis / 3600000) % 24; // 一天24小时 int minutes = (currentMillis / 60000) % 60; // 一小时60分钟 int seconds = (currentMillis / 1000) % 60; // 分钟60秒 lcd.setCursor(0, 0); lcd.print(hours < 10 ? "0" : ""); // 如果小时小于10,在前面加零 lcd.print(hours); lcd.setCursor(0, 1); lcd.print(minutes < 10 ? "0" : ""); lcd.print(minutes); lcd.setCursor(0, 2); lcd.print(seconds < 10 ? "0" : ""); lcd.print(seconds); } 5. **主循环**: 每隔一段时间更新数码管显示。 ```cpp void loop() { clockDisplay(); delay(1000); // 等待1秒再刷新 } ``` 6. **完整代码示例**: ```cpp LiquidCrystal lcd(8, 9, 4, 5, 6, 7); unsigned long lastUpdate = 0; void setup() { lcd.begin(16, 2); // 数码管行数x列数 } void loop() { if (millis() - lastUpdate > 1000) { // 每秒更新一次 clockDisplay(); lastUpdate = millis(); } } void clockDisplay() { // ... } ```
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值