169 Identify the channel settings that can be performed using the CONFIGURE CHANNEL or ALLOCATE CHAN

本文介绍了使用RMAN的CONFIGURE CHANNEL及ALLOCATE CHANNEL命令进行备份通道设置的方法,包括限制I/O带宽消耗、指定备份集大小及备份片段大小、设置媒体管理器的供应商特定参数等内容。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

169
Identify the channel settings that can be performed using the CONFIGURE CHANNEL or ALLOCATE
CHANNEL commands in RMAN (choose all that apply)
A. Limiting the input/output (I/O) bandwidth consumption
B. Specifying the size of backup sets and backup pieces
C. Specifying vendor-specific information for a media manager

D. Specifying the parallelism for backup and restore operations














Correct Answer: AC
Section: (none)
Explanation
Explanation/Reference:
Explanation:
Whether you allocate channels manually or automatically, you can use channel control commands and
options to do the following:
Control the operating system resources RMAN uses when performing RMAN operations. Affect the degree
of parallelism for a backup or restore (in conjunction with the FILESPERSET parameter of the BACKUP

command)

Set limits on I/O bandwidth consumption in kilobytes, megabytes, or gigabytes
(ALLOCATE CHANNEL …RATE, CONFIGURE CHANNEL … RATE)-check
Set limits on the size of backup pieces (the MAXPIECESIZE parameter specified on the
CONFIGURE CHANNEL and ALLOCATE CHANNEL commands)- half of answer B
Set limits on the size of backup sets
(the MAXSETSIZE parameter specified on the BACKUP and CONFIGURE commands)
- Not in the CONFIGURE CHANNEL and ALLOCATE CHANNEL (B is wrong)
Set limits on the number of concurrently open files
(ALLOCATE CHANNEL … MAXOPENFILES, CONFIGURE CHANNEL … MAXOPENFILES)
Send vendor-specific commands to the media manager
(SEND)
Specify vendor-specific parameters for the media manager
(ALLOCATE CHANNEL … PARMS, CONFIGURE CHANNEL … PARMS)-check
Specify which instance performs the operation
(ALLOCATE CHANNEL … CONNECT, CONFIGURE CHANNEL … CONNECT)
Oracle Press 1Z0-053 Exam Guide, Chapter 8: Monitoring and Tuning RMAN:
You can further tune your RMAN backup performance by tuning individual channels with the CONFIGURE
CHANNEL and ALLOCATE CHANNEL commands. Each CHANNEL command accepts the following
parameters:
- MAXPIECESIZE: The maximum size of a backup piece
- RATE: The number of bytes per second read by RMAN on the channel
- MAXOPENFILES: The maximum number of input files that a channel can have open at a given time
The MAXPIECESIZE parameter is useful when you back up to disk and the underlying operating system
limits the size of an individual disk file, or when a tape media manager cannot split a backup piece across
multiple tapes.
Note that the RATE parameter doesn't improve performance but throttles performance intentionally to limit
the disk bandwidth available to a channel. This is useful when your RMAN backups must occur during
periods of peak activity elsewhere in the database.
MAXOPENFILES was reviewed in the preceding section, but it is worth revisiting when you want to
optimize the performance of an individual channel. For example, you can use MAXOPENFILES to limit
RMAN's use of operating system file handles or buffers.
Oracle Press 1Z0-053 Exam Guide, Chapter 4: Creating RMAN Backups
References to PARALLELISM were only referenced as CONFIGURE DEVICE TYPE DISK
PARALLELISM…
By default, any backups to disk default to a backupset backup type:
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default


<think>好的,我现在需要帮助用户解决关于ESXi中iSCSI适配器命令的问题。用户之前询问过如何验证iSCSI Target的配置,现在他们在执行`esxcli iscsi adapter targetportal list -A vmhba32`时遇到了命令格式错误的问题,并得到了正确的命令格式。现在用户提供了`esxcli iscsi adapter --help`的输出,并可能希望进一步了解如何使用这些命令。 首先,我需要分析用户提供的帮助信息。`esxcli iscsi adapter`有多个子命名空间,比如auth、discovery、target等,每个子空间对应不同的操作。用户可能想知道这些子空间的具体用法,或者如何执行某些操作,比如列出适配器、配置认证等。 接下来,用户的问题可能涉及如何正确使用这些命令,特别是他们可能遇到了参数错误,比如之前使用短参数-A的问题。现在用户可能希望了解每个子空间的命令选项,或者如何正确构造命令。 我需要考虑用户可能的深层需求。他们可能是在配置iSCSI存储时遇到了问题,需要更详细的命令指导。例如,如何添加或删除Target Portal,如何设置认证,或者如何查看适配器的能力和固件信息。此外,用户可能对如何设置iSCSI名称和别名感兴趣,这在之前的回答中提到过`set`命令。 另外,用户提供的帮助信息中列出了可用的命令,如`get`、`list`、`set`,但每个子空间可能有更多的具体命令。例如,`auth`子空间可能有`add`或`remove`命令来管理认证信息。用户可能需要具体的示例来理解如何使用这些命令。 我还需要注意用户的环境是ESXi 6.7,因此需要确保提供的命令和参数适用于该版本。例如,在之前的回答中提到ESXi 6.7不支持短参数,必须使用长参数如`--adapter`。 最后,我需要生成相关的后续问题,帮助用户进一步探索这些命令的使用,比如如何添加Target Portal、配置CHAP认证、查看适配器参数等。这些问题应该覆盖用户可能需要的常见操作,并引导他们更深入地使用这些命令行工具。 </think> 在ESXi 6.7中,`esxcli iscsi adapter`命令的子命名空间和功能如下: ### **1. 子命名空间说明** - **auth**:管理iSCSI适配器的认证配置(如CHAP)。 - **discovery**:管理iSCSI Target的发现方式(静态或动态iSNS)。 - **target**:直接操作iSCSI Target(如添加/删除)。 - **capabilities**:查看适配器支持的功能(如多路径、IPv6)。 - **firmware**:查看或更新适配器的固件(部分硬件适配器支持)。 - **param**:调整适配器的运行时参数(如超时时间、队列深度)。 --- ### **2. 常用命令示例** #### (1)列出所有iSCSI适配器 ```bash esxcli iscsi adapter list ``` - **输出示例**: ``` Adapter Driver LUN Operations Path Operations Status -------- -------- ---------------- ---------------- ------ vmhba32 iscsi_vmk 0 0 on ``` #### (2)查看适配器详细信息 ```bash esxcli iscsi adapter get --adapter vmhba32 ``` - **输出示例**: ``` Adapter: vmhba32 iSCSI Name: iqn.1998-01.com.vmware:esxi-ssd-12345 Alias: my_iscsi_adapter ... ``` #### (3)设置适配器名称和别名 ```bash esxcli iscsi adapter set --adapter vmhba32 --name iqn.2023-04.com.example:storage --alias prod_storage ``` --- ### **3. 关键子命名空间操作** #### (1)**auth**:配置CHAP认证 - **添加CHAP认证**: ```bash esxcli iscsi adapter auth chap set --adapter vmhba32 --chap-name myuser --chap-password mypassword --type unidirectional ``` - **删除CHAP认证**: ```bash esxcli iscsi adapter auth chap remove --adapter vmhba32 ``` #### (2)**discovery**:管理Target发现 - **添加静态Target**: ```bash esxcli iscsi adapter discovery sendtarget add --adapter vmhba32 --address 192.168.1.200:3260 ``` - **删除静态Target**: ```bash esxcli iscsi adapter discovery sendtarget remove --adapter vmhba32 --address 192.168.1.200:3260 ``` #### (3)**target**:直接操作Target - **列出已发现的Target**: ```bash esxcli iscsi adapter target list --adapter vmhba32 ``` - **强制重新登录Target**: ```bash esxcli iscsi adapter target relogin --adapter vmhba32 --target iqn.1998-01.com.netapp:sn.12345678 ``` --- ### **4. 注意事项** - **参数格式**:ESXi 6.7严格要求长参数(如`--adapter`),短参数(如`-A`)可能无效。 - **适配器名称**:确保使用正确的适配器名称(如`vmhba32`),可通过`esxcli iscsi adapter list`确认。 - **配置持久化**:部分命令(如`set`)需重启主机或适配器生效。 --- ### **5. 总结** 通过`esxcli iscsi adapter`的子命名空间,可以完成以下操作: 1. **认证配置**(auth) 2. **Target发现管理**(discovery) 3. **Target直接操作**(target) 4. **适配器能力/固件/参数管理**(capabilities/firmware/param) 建议通过`--help`查看具体子命令的详细参数(如`esxcli iscsi adapter auth --help`)。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值