使用Qt和tslib编写ARM平台的鼠标触摸屏应用程序

编程 专栏收录该内容
¥29.90 ¥99.00
408篇文章

在ARM平台上开发嵌入式应用程序时,Qt和tslib是两个常用的工具。Qt是一个跨平台的应用程序开发框架,而tslib是一个用于处理触摸屏输入的库。本文将介绍如何在ARM平台上使用Qt和tslib编写鼠标触摸屏应用程序。

步骤1:安装Qt和tslib

首先,我们需要在ARM平台上安装Qt和tslib。具体的安装步骤可能会有所不同,取决于你使用的ARM平台和操作系统。请参考相关文档或资源,以确保正确安装和配置Qt和tslib。

步骤2:创建Qt项目

在安装和配置Qt和tslib之后,我们可以开始创建一个新的Qt项目。打开Qt集成开发环境(IDE),并选择创建一个新的Qt项目。根据你的需求选择一个合适的项目模板。

步骤3:配置tslib

在Qt项目中使用tslib之前,我们需要进行一些配置。在项目的.pro文件中添加以下行:

QT += tslib

这将确保Qt使用tslib库。

步骤4:编写Qt代码

现在,我们可以编写Qt代码来处理鼠标触摸屏输入。下面是一个简单的示例:

#include 
嵌入式QT程序同时支持触屏和鼠标的解决办法 嵌入式QT程序需要支持触屏和鼠标同时使用,一般会使用tslib库(tslib和qt编译请参照网上其他帖子) qt和tslib配置如下: # 注意替换库文件路径和对应的设备文件路径 LIB_ROOT=/usr QT_DIR=${LIB_ROOT}/qt4.8.6 TS_DIR=${LIB_ROOT}/tslib-1.8 export LD_LIBRARY_PATH=${LIB_ROOT}/l... 阅读详情

相关推荐

基于tslib的嵌入式触摸屏校准方案设计与实现

本文详细介绍了在嵌入式系统中基于tslib库实现触摸屏精准校准的完整方案。以RK3568开发板为例,从交叉编译环境搭建、tslib库的移植与配置,到实战校准、性能优化及常见问题排查,提供了全流程指南。重点阐述了如何通过tslib解决触摸坐标漂移问题,确保工业控制、智能终端等场景下的可靠交互。

weixin_29194817的博客 108

关于Qt移植arm上点击没反应,箭头也不动的问题

Qt移植,点击屏幕没反应

Demetered的专栏 3618

qt库arm移植编译及问题解决

关于arm进行qt移植的时,对qt库编译及tslib编译方法已经很多了,我在这里就对遇到的问题进行整理和补充一遍以后学习和使用。 首先对于tslib触摸屏校准程序,我觉得有一篇博客写的很好,以供大家参考。 博客网址为: http://blog.sina.com.cn/s/blog_6dd8f2b70101hqm5.html如果需要可以参考上面的博客,我在这里就只对遇到的问题进行补充。

zhitouniao的博客 940

Embedded QT鼠标驱动支持IRTOUCH触摸屏编程

通过上述步骤,我们可以修改Embedded QT鼠标驱动,以支持IRTOUCH触摸屏。首先,我们需要了解触摸屏的通信协议,然后对鼠标驱动模块进行相应的修改,最后进行编译和部署。在开始修改鼠标驱动之前,我们首先要了解IRTOUCH触摸屏的通信协议。根据触摸屏厂商提供的文档,我们需要了解触摸屏的数据格式、通信方式以及相应的指令集。下面是一个简化的示例代码,用于演示如何修改鼠标驱动以支持IRTOUCH触摸屏。完成鼠标驱动的修改后,我们需要重新编译和部署嵌入式系统,使修改生效。在上面的示例代码中,

DevPulse的博客 489

linux下qt交叉编译 tslib 库

配置 Qt 项目的交叉编译环境:在进行 Qt 项目的交叉编译之前,你需要配置相应的环境变量,以让 Qt 构建系统能够找到交叉编译工具链和 tslib 库。构建和运行 Qt 项目:根据你的项目需求,通过交叉编译工具链和 tslib 库,在交叉编译环境下构建和运行 Qt 项目即可。在构建过程中,Qt 项目会链接 tslib 库,并在目标平台上运行。请注意,上述步骤中的路径和命令可能因你的具体环境而有所不同。另外,如果涉及其他依赖项或配置选项,请参考对应的文档或官方指南进行设置和操作。是交叉编译器的路径,

m0_46376834的博客 1034

【DDSCAT——离散偶极近似仿真程序05】模型设计Matlab代码:多核壳球 、多核壳圆柱

简洁明了,后面及部分给出的都是模型设计的Matlab代码,这些代码都来自于一篇文章:Chin C W S. Localized Surface Plasmon Resonance with the use of Silver and Titanium Oxide Nanostructures[J]. 2011. 一、设计多个核壳球形结构 1)Matlab代码 ...

XD_Yangf的博客 4263

Unity开发HoloLens应用:从打包到部署的完整指南

本文为Unity开发者提供了将应用部署到HoloLens设备的完整实战指南。详细讲解了从环境准备、Unity项目配置、生成Visual Studio工程,到最终构建APPX安装包并通过设备门户或Visual Studio进行部署的全流程,帮助开发者高效完成混合现实应用的打包与安装。

red88的博客 1021

岭回归的MATLAB步骤

MATLAB 实现框架,它涵盖了从数据导入到岭回归的步骤,包括计算共线性、使用 MAE、MSE、R²、MAPE 进行评价,以及绘制相应的可视化图表。

subject625Ruben的博客 1091

ARC学习(6)arc 编译器overlap 地址重叠方式使用

摘要:本文介绍了ARC编译器中使用overlap地址重叠的方法。

张一西的博客 719

yolov7模型部署流程

yolov7部署流程

算法的猫 1397

Rocky Linux 8.10下用cephadm快速搭建Ceph集群(附华为云镜像源配置)

本文详细介绍了在Rocky Linux 8.10操作系统上使用cephadm快速部署Ceph集群的实战指南,包括环境准备、系统配置、华为云镜像源优化、集群初始化及节点扩展等关键步骤。通过配置华为云镜像源,显著提升部署效率,适合企业级存储解决方案的需求。

weixin_30839881的博客 149

AI智能体丨使用Coze一键生成道教国学智慧语录视频,涨粉快好变现!(附保姆级教程)

该教程详解如何通过自动化流程批量制作道家国学视频,将晦涩哲理转化为轻量化内容,适配短视频平台需求。

李同学Lino的博客 3502

Xilinx平台SRIO介绍(一)RapidIO协议介绍

菜鸟到老鸟:会用工具; 老鸟到大佬:深入理解原理。 ——FPGA大叔·沃自己硕得

数字IC/FPGA杂货铺,找一找,或许有你想要的~ 1万+

TMS_WebGMaps_1.9.8.0_Full_Source

TMS_WebGMaps_1.9.8.0_Full_Source 全源码 delphi cbuilder

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

华为的C语言编程规范.pdf

华为技术有限公司内部技术规范。本规范制定了编写C语言程序的基本原则、规则和建议。从代码的清晰、简洁、可测试、安全、程序效率、可移植各个方面对C语言编程作出了具体指导。

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

上一篇: Android短信数据库字段编程
下一篇: ARM Linux驱动编程:ADC驱动实现
普通网友
博客等级 码龄3年 225粉丝 642原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值