墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
200+累计阅读
224平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
非阻塞IO是一种实现高效IO操作的方法，它允许程序在等待IO操作完成时继续执行其他任务，而不是阻塞在IO操作上。在Python中，我们可以使用select模块来实现非阻塞IO。本文将详细介绍如何使用select模块实现非阻塞IO，并提供相应的源代码。
select模块是Python的内置模块，它提供了一个select函数，可以监视文件描述符的状态，包括可读、可写和异常等。通过select函数，我们可以同时监视多个文件描述符，一旦其中任何一个文件描述符准备就绪，我们就可以进行相应的IO操作。
下面是一个示例代码，演示了如何使用select模块实现非阻塞的IO：
import select
import socket
# 创建一个套接字对象
server_socket = socket.socket(socket.AF_INET, socket.SOCK_STREAMSurfaceControlViewHost使用介绍
可以看到，主要用途：是把一个进程的View显示到另外一个进程里面。
FPGA学习之路—应用程序—原码二位乘法器及Verilog代码分析
FPGA学习之路——原码二位乘法器及Verilog代码分析 原理 原码乘法可以分为原码一位乘和原码二位乘，两者在实现规则上大同小异。原码一位乘每次判断乘数的最低位，对被乘数和部分积进行相应操作。而原码二位乘则是对乘数的低二位进行判断，并执行相关操作。 两位乘数的取值可以有四种可能组合,每种组合对应于以下操作: 00相当于0x，部分积Dresult右移2位，不进行其他运算； 01相当于1x，部分积D...
VSCode CMake 安装与配置详解
概述 在windows上使用cmake编译C/C++程序时，首先需要CMake,安装gcc/g++编译环境，然后使用VSCode 以及配置下CMakelist.txt。 所需工具： VSCode (需要安装以下插件) C/C++ C++ Intellisense CMake CMake tools CMake Tools Helper CMake MinGW 安装CMake 下载链接：...
在Termux上安装Kali Linux 完整系统
介绍如何在Termux上安装Kali Linux 完整系统
告别玄学调参：手把手教你用LSTM-AutoEncoder为传感器数据做异常检测（实战篇）
本文详细介绍了LSTM-AutoEncoder在传感器数据异常检测中的工程化实践，包括数据预处理、模型架构设计和生产环境部署策略。通过结合LSTM的时间序列处理能力和AutoEncoder的特征提取优势，该方法能够有效识别温湿度、PM2.5等传感器数据的异常模式，适用于工业物联网和室内空气质量监测等场景。
光模块组成
时钟恢复电路(Clock Data Recovery，简称CDR)是光模块中的关键组成部分，CDR的作用主要是从接收到的信号中提取出数据序列，并且恢复出与数据序列相对应的时钟时序信号，从而还原接收到的具体信息。因为光信号传输至一定距离的时候，通常是长距离传输，其波形会出现一定程度的失真，接收端接收到的信号是一个个长短不一的脉冲信号，这个时候在接收端，我们就无法得到我们需要的数据。所以，这个时候就需要有信号的再生，信号的再生功能为再放大、再整形和再定时，其中的再定时指的就是CDR时钟数据恢复。
MacBook Air老本重装系统
手里的这个本子型号是A1466，cpu i5，4G内存，硬盘ssd 120G。 重装系统可以在原系统上升级到更新版本，或者用U盘安装。 先确定，这个本子可以安装什么系统。 最权威的信息当然是apple的官网，地址：https://support.apple.com/zh-cn/HT211683 在“检查兼容性”中，可以依次检查每个系统兼容的硬件型号。Mojave是A1466能安装的最高版本。 确认兼容性后，下一步就是下载安装文件。还是这个页面稍下面一点可以找到。 这里告诉用户文件可以在什
A133在Android13上适配百兆以太网
NOTE] 【技术支持问题】问题背景/平台。
假人有限元模型
假人模型，车辆碰撞假人有限元模型，适合做乘员安全的研究者利用
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
Outlook Express 6 (OE6) for Win7/Win8/Win10
英文版 Outlook Express6.0， 兼容Win7/Win10/WinXP，解压就可用。
Statistics and Machine Learning Toolbox
Statistics and Machine Learning Toolbox（带书签），MATLAB统计学习工具
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
1281
扫一扫
