Tengine优化:从Web代理服务器到分布式推送服务器

分布式 专栏收录该内容
¥59.90 ¥99.00
134篇文章

随着互联网的发展,Web代理服务器和分布式推送服务器变得越来越重要。在本篇文章中,我们将探讨如何使用Tengine来优化这两个关键服务器的性能和可扩展性。

Web代理服务器是位于客户端和目标服务器之间的中间服务器,用于转发和缓存客户端请求。它可以提供负载均衡、缓存、安全性等功能,以改善用户体验和减轻后端服务器的负载。分布式推送服务器用于实时向大规模用户推送数据,如消息、通知等。它需要处理高并发的连接和数据推送,确保推送的实时性和可靠性。

Tengine是由淘宝网发起的一个开源的高性能Web服务器项目,它在Nginx的基础上进行了优化和改进。Tengine提供了一系列的模块和功能,可以帮助我们构建高性能、可扩展的Web代理服务器和分布式推送服务器。

下面我们将分别介绍如何使用Tengine优化Web代理服务器和分布式推送服务器。

优化Web代理服务器

1. 负载均衡

负载均衡是Web代理服务器的核心功能之一。Tengine提供了多种负载均衡算法,如轮询、IP哈希、最少连接等。我们可以根据实际需求选择适合的算法。

http {
    upstream backend {
        server backend1.example.com;
        server backend2.example.com;
        server backend3.example.com;
    }

    server {
        listen 80;
        server_name ex
功能安全入门:手把手教你用IEC 62380标准计算芯片失效率(附SN 29500对比) 本文深入解析了IEC 62380标准在芯片失效率计算中的应用,对比了SN 29500的差异,并提供了实战案例和避坑指南。通过详细的参数获取方法和分步计算演示,帮助功能安全工程师准确评估芯片可靠性,确保设计符合安全要求。特别适合汽车电子和工业控制领域的专业人士参考。 阅读详情

相关推荐

别再调参了!用Simulink手把手教你搞定FOC电机速度环PI控制器(附模型下载)

本文详细介绍了如何使用Simulink搭建FOC电机速度环PI控制器,通过模最优准则和系统化调试方法,避免传统手动调参的繁琐过程。文章包含从传递函数推导到参数自动整定的完整流程,并提供了实战调试技巧与异常处理指南,帮助工程师快速实现电机控制系统的稳定运行。

weixin_42519985的博客 413

微信小程序消息推送全攻略:从模板消息到订阅消息的实战避坑指南

本文深入解析微信小程序消息推送机制,对比模板消息、订阅消息与客服消息的核心差异与适用场景。重点提供订阅消息从用户授权设计、前端代码实现到后端稳定发送的完整实战指南,并分享提升消息点击率的文案与运营技巧,帮助开发者构建高效、用户友好的消息推送体系。

b3n4m5q6w7的博客 335

UsualToolCMS-验证码绕过漏洞复现

本文以UsualToolCMS为靶场,复现了验证码绕过漏洞

小小小屿屿屿的博客 918

基于MobileNet⁃DOA的无人机射频信号识别方法

本文提出了一种基于MobileNet-DOA模型的无人机射频信号识别方法,用于解决低信噪比环境下无人机型号和飞行模式识别率低的问题。该方法首先采用变分模态分解(VMD)进行信号预处理以降低噪声干扰,然后通过短时傅里叶变换(STFT)将信号转换为时频图。在模型设计上,将DOConv卷积融入MobileNetv4模型以增强特征提取能力并提高运算速度,同时引入FA注意力机制提升低信噪比环境下的识别精度。实验结果表明,该方法在-15~15dB信噪比范围内的平均识别准确率达到94.83%,显著优于现有方法,特别在-1

qq_43416206的博客 1349

新代永久解锁西门子smart S7-200PLC 上传程序步骤

西门子 SMART S7-200 PLC 程序上传步骤 打开编程软件 或左下角依次打开 程序 所有程序 Siemens Automation Simatic STEP 7-MicroWIN SMART V2.4 STEP 7-MicroWIN SMART 技术交流 plcjiesuo1 2. 确认plc电源端以及输入电压; 3.用网线连接plc与电脑技术交流 plcjiesuo1 4.plc通电; 5.打开编程软件,双击通讯 6.按照...

m0_60773720的博客 2万+

Qi标准下的充电协议及其记忆技巧

记忆无线充电协议中的。

m0_73991989的博客 1319

多智能体系统在军事仿真中的应用:AI人工智能战略推演

本文旨在全面解析多智能体系统在军事仿真领域的应用技术,重点探讨AI驱动的战略推演系统的设计原理和实现方法。研究范围涵盖从基础理论到实际应用的完整技术栈。本文采用从理论到实践的递进结构,首先介绍核心概念,然后深入算法实现,最后展示实际应用案例和未来展望。多智能体系统(MAS):由多个相互作用的智能体组成的分布式系统军事仿真(Military Simulation):通过计算机模拟军事行动和战争场景战略推演(Strategic Wargaming):通过模拟推演评估军事战略的有效性更高保真度的仿真。

AI天才研究院 1777

如何通过单步调试的方法,找到 SAP Gateway 到底把 Fiori 应用发送的 OData 请求,投递到哪一台 ABAP 后台服务器了?

这是一个 Count 请求,得到服务器响应的数据是 204,这个 204 会以数字的形式,显示在 Fiori Launchpad tile 上。那如果当前 Gateway 系统可以连接到多台 ABAP 后台服务器,比如下图所示,可以连接 SAP S/4HANA,ERP 或者 SAP CRM,我怎么知道 SAP UI5 应用上显示的数据,到底来自哪一台 ABAP 后台服务器呢?,就是上图 ABAP 调试器里断点停留的位置,即 SAP Frontend 服务器,通过 RFC 将 OData 请求投递给。

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 640

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

假人有限元模型

假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: Redis分布式锁的两种实现方式
下一篇: 分布式系统设计的注意事项
普通网友
博客等级 码龄3年 26粉丝 0原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值