u-boot-2016.11移植nandfalsh（基于s5pv210）

一、移植nandflash

nand初始化的函数是在board_init_r中被调用

vim common/board_r.c

#ifdef CONFIG_CMD_NAND
        initr_nand,
#endif
#ifdef CONFIG_CMD_ONENAND
        initr_onenand,          /* modied by Sourcelink */
#endif

u-boot一开始定义了CONFIG_CMD_ONENAND在smdkv210.h中

vim include/configs/smdkv210.h

#define CONFIG_CMD_NAND         /* modied by Sourcelink */
#define CONFIG_CMD_REGINFO
#undef  CONFIG_CMD_ONENAND      /* modied by Sourcelink */

进入init_nand函数中发现调用了nand_init函数，通过追踪发现CONFIG_SYS_NAND_DEVICE没有定义

vim drivers/mtd/nand/nand.c

        for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
                nand_init_chip(i);

在smdkv210.h中添加该宏CONFIG_SYS_NAND_DEVICE

/*
 * NAND Contoller driver
 */
#ifdef CONFIG_CMD_NAND                  /* add by Sourcelink */
#define CONFIG_SYS_MAX_NAND_DEVICE      1
#endif

编译发现没有定义宏CONFIG_SYS_NAND_BASE

#ifdef CONFIG_CMD_NAND                  /* add by Sourcelink */
#define CONFIG_SYS_MAX_NAND_DEVICE      1
#define CONFIG_SYS_NAND_BASE            0xB0E00000
#endif

再次编译，还是出错，onenand_mtd和board_nand_init又没有定义，查看common/Makefile

vim common/Makefile

obj-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o
obj-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o
obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o

我们需要把环境变量保存到nand，所以屏蔽掉CONFIG_ENV_IS_IN_ONENAND，并定义宏CONFIG_ENV_IS_IN_NAND

vim include/configs/smdkv210.h 

#define CONFIG_ENV_IS_IN_NAND           1       /* add by Sourcelink */

#if 0
#define CONFIG_ENV_IS_IN_ONENAND        1
#endif