墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
100+累计阅读
147平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
Boost.Signals 的有序插槽示例 - C/C++
Boost.Signals 是 Boost 库中的一个组件，用于实现信号和槽机制。它提供了一种简单而灵活的方式来实现事件的发布和订阅模式。本文将介绍 Boost.Signals 的有序插槽功能，并提供一个简单的 “Hello, World!” 示例。
首先，确保已经安装了 Boost 库。然后，我们可以开始编写示例代码。
#include <boost/signals2.hpp>
#include <iostream>
// 定义信号类型
typedef boost::signals2在不同版本Python中安装PyQT5及PyQT5-Tools
在不同版本Python中安装PyQT5及PyQT5-Tools
一种4位sar adc仿真验证
4位sar adc采用下图的电容阵列，电路如下图：所有电容的正端（也称为上极板）与比较器的反相端连接，比较器同相端接Vin，其工作过程进行大致分析见之前的文章《一种4位sar adc工作过程推导（三）》，下面对这个电路进行仿真验证。 两个参考电压VrefPV_{refP}VrefP和VrefNV_{refN}VrefN，V+=VinV_{+}=V_{in}V+=Vin，假设1116(VrefP−VrefN)+VrefN<Vin<1216(VrefP−VrefN)+VrefN\frac{
Excel中如何快速地将成绩按比例来划分为等级？
问题介绍： 记录说明：班级里共有40个人，按最终总平均成绩从高到低划分等级，A等级30%，B等级50%，C等级20%。 部分成绩如下表所示： Excel中相关函数介绍： IF函数 IF函数有三个参数，语法如下： =IF(条件判断, 结果为真返回值, 结果为假返回值) 第一参数是条件判断，比如说“A1=">37”这种，判断TRUE或FALSE。如果判断是TRUE（结果为真）那么IF函数返回值是第二参数，否则（结果为假）返回第三参数。 如果省略了第三参数，则当结果为假时，会返回FALSE。 如果公式
YOLOv8环境搭建+训练自己的数据详细项目
直接按照路径会有问题，找到自己 requirements.txt 文件路径，我这里是pip install -r D:\ultralytics-main\ultralytics-main\requirements.txt。首先去自己的anaconda的安装的envs（虚拟环境），在导航栏输入cmd，进入命令窗口。到官方网站下载yolo模型 ，下载好后解压，里面有个文件requirements.txt。然后安装ultralytics ，这是必须的。
三极管自激升压电路设计 - 从参数计算到实践验证
本文详细解析了三极管自激升压电路（焦耳小偷电路）的设计原理与实践方法。通过剖析自激振荡机制与三极管电流关系，指导读者完成从核心参数计算、关键元件选型到面包板搭建调试的全过程。文章重点阐述了如何利用电感、三极管等基础元件实现低压直流到高压的转换，是理解开关电源与电磁能量转换的绝佳实践项目。
ADRV9026初始化避坑指南：手把手调试PostMcsInit常见故障
本文详细解析了ADRV9026多片同步初始化过程中的PostMcsInit常见故障，包括时钟校准失败、JESD链路建立问题和ARM核通信异常等。通过实际项目经验，提供了硬件检查清单、软件配置要点和分层诊断方法，帮助工程师快速定位和解决问题，提升系统稳定性。
【异常检测】【EfficientAD】论文简单梳理与代码实现
EfficientAD作为较近的一篇异常检测网络，主要还是从S-T网络入手，对齐进行了相关改进。修改特征提取器引入自动编码器hard loss以及惩罚项。
公交车调度排班优化算法研究与实现
本文提出的公交车调度排班优化算法基于遗传算法，能够较好地处理公交车调度排班问题，使得车辆数量和运营时间得到平衡，公交车的使用效率得到了优化。在模拟的公交车路线中，使用本文所提出的算法，得到了一组较优的公交车调度排班方案。其中，车辆数量的多少会影响到公交车的行驶速度和等候时间，而运营时间的长短则会直接影响到公交车的使用效率和成本。本文基于遗传算法，通过随机生成种群、选择、交叉、变异等操作，逐步优化种群中个体的适应度，最终得到较优的公交车调度排班方案。以下是本文中所使用的Matlab代码实现，供参考。
IEM模型，地表粗糙度模拟
利用微波反演土壤水分时候，利用IEM模型可以实现对随机地表的模拟
复分析 阿尔福斯(Ahlfors) 第三版答案 英文
答案分为十章，有部分习题没有答案，全英文复分析阿尔福斯(Ahlfors) 第三版答案
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
visio安装包
Microsoft Office Visio 是一款专业的制图软件。利用经过更新的形状、协作工具和数据链接图表，创建专业级图表以简化复杂的信息。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
2万+
扫一扫
