墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
600+累计阅读
615平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
广发基金外包面试经验及Java相关问题
在广发基金外包的面试中，Java是一个常见的面试话题。以下是一些可能在广发基金外包面试中被问到的Java相关问题以及它们的解答。
什么是Java？
Java是一种广泛使用的面向对象的编程语言，它具有跨平台的特性。Java可以在不同的操作系统上运行，只需要在目标平台上安装Java虚拟机（JVM）即可。
Java中的基本数据类型有哪些？
Java中的基本数据类型包括整型（int）、长整型（long）、浮点型（float和double）、布尔型（boolean）和字符型（char）。
下面是一个简单的示例代码，演示了如何在Java中声明和使用基本数据类型：
public class BasicDataTypes {
public static void mainMike 21如何制作随水深变化的糙率文件
MIKE 21如何制作随水深变化的糙率文件
virtualbox虚拟机里面最顶部没有控制、设置和帮助等选项
无意中操作，导致virtualbox虚拟机里面最顶部没有控制，设置和帮助选项 virtualbox虚拟机窗口显示如下如： 如何设置，窗口显示如下图所示呢： virtualbox虚拟机窗口模式显示设置，切换可以通过如下图所示操作进行切换： PS：一定要是右边的Ctrl+C
【随机过程】 3 - 随机过程的频域分析1 - 功率谱
随机过程的频域分析 文章目录随机过程的频域分析1. 什么是谱2. 确定信号的频谱2.1 周期信号的频谱2.2 非周期信号的频谱3. 随机信号的谱3.1 随机信号做傅里叶分析的困难3.2 功率谱密度的物理和数学表示形式3.2.1 功率谱密度的物理表示3.2.2 功率谱密度的数学表示3.3 功率谱密度的解读3.3.1 量纲分析3.3.2 谱3.3.3 密度3.3.4 wiener和khinchin3.4 功率谱密度的性质3.4.1 非线性3.4.2 偶函数3.5 wiener-khinchin关系的应用3.6
加速度积分得到速度的Omega算法
在工程中，有时候很难直接测量机械设备部件的速度或位移，特别是在运动着的设备上。即使在一般的场景下可以布置速度传感器，但是有时候需要同时监测速度和加速度，为了节约成本，往往通过将加速度信号直接进行积分得到速度信号。 将加速度信号积分得到速度信号有两种方法，一是直接在时域进行积分，这往往会产生趋势项，积分的结果需要进行去趋势处理。二是在频域进行积分，典型的频域积分算法是omega算法，这里做一下简单的介绍： 如果我们已经获得了加速度信号x''(t) , 其傅里叶变...
《QT+PCL》点云的点选与框选
【代码】《QT+PCL》点云的点选与框选。
如何使用 ESP32 CAM 进行自动车牌识别 （ANPR）
用于提取 JSON 值并在 OLED 上显示文本的函数。有一个可用的函数，即 extractJsonStringValue 来提取字符串值。它是独立函数，但您仍然可以使用一些 JSON 库来执行相同的功能。
【100分】最长子字符串的长度
题目要求在一个环形字符串中找出字符 ‘o’ 出现了偶数次的最长子字符串长度。这里的字符串是一个环形的，即首尾相连。代码统计了字符串中字符 ‘o’ 的出现次数，并根据其奇偶性返回相应的最长子字符串长度。当 ‘o’ 的数量为偶数时，直接返回字符串长度；当 ‘o’ 的数量为奇数时，返回长度减去 1。给你一个字符串 s，字符串s首尾相连成一个环形 ，请你在环中找出 ‘o’ 字符出现了偶数次最长子字符串的长度。【最长子字符串的长度】
地表最强之Android微信语音/腾讯会议通话录音
地表最强之Android微信语音/腾讯会议通话录音
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
怀旧版电脑GBC模拟器
再现原版GBC掌机的界面，电脑运行连游戏界面都一样大小，很怀旧，很真实，（英文版）强烈推荐，很小的文件，很难才找到的。
VC中sqlite的使用
在VC中对sqlite的使用，实现数据库大批数据的快速插入，读取数据库中的数据在ListCtrl中显示
计算机控制技术及应用
《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术，以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索，主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式，计算机控制系统的数学描述与基本分析方法，以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
订阅专栏 解锁全文
2250
扫一扫
