ESP32 Arduino开发实例-使用SPI通信与Arduino进行物联网连接

墨衍会员 · AI 创作全网分发 墨衍智能分发 本文由作者通过墨衍一键同步至各平台 1分发平台 1.1k累计阅读 1.2k平均单平台已同步平台优快云微信公众号微博知乎掘金百家号博客园抖音小红书 你的文章也可以这样分发 墨衍会员 ¥399起/年，写一次发全网我也要 → 码龄3年

关注

原创最新推荐文章于 2026-04-06 02:47:28 发布 1.1k 阅读 AI 写同款· GEO 优化 ›

物联网专栏收录该内容

¥59.90 ¥99.00

55篇文章

订阅专栏

物联网（IoT）是一个快速发展的领域，其中使用单片机和传感器等设备进行通信是非常常见的。在这篇文章中，我们将探讨如何使用ESP32和Arduino之间的SPI通信来实现物联网连接。我们将提供相应的源代码，帮助你开始使用这种通信方式。

SPI（Serial Peripheral Interface）是一种常见的串行通信协议，用于在微控制器和外部设备之间传输数据。它使用主从架构，其中一个设备充当主设备，而其他设备则作为从设备响应主设备的指令。在这种情况下，ESP32将充当主设备，而Arduino将作为从设备。

首先，确保你已经安装了Arduino IDE和ESP32的开发环境。接下来，我们将分为两个部分：主设备（ESP32）和从设备（Arduino）的设置。

主设备（ESP32）设置：

导入SPI库。

#include <SPI.h>

定义从设备的引脚连接。

了解本专栏

订阅专栏解锁全文

收录于

当前文章被以下社区和专栏收录：

标签

#物联网

【史上最全面arduino esp32教程】SPI的使用 Arduino ESP32是一款功能强大的开发板，它集成了WiFi和蓝牙模块，同时支持SPI总线通信。SPI（Serial Peripheral Interface）是一种常用的通信协议，可以实现与多个外设的高速数据传输。本文将介绍Arduino ESP32中SPI的使用方法与示例代码，帮助你更好地理解和应用SPI协议。SPI是一种常用的通信协议，可以实现高速数据传输，广泛应用于各种外设的控制和通信。在Arduino ESP32中，SPI的使用非常简便。首先，通过指定引脚和SPI模式设置初始化SPI总线。阅读详情

相关推荐

ESP32-Arduino开发实例-与Arduino之间SPI通信

NodeMCU-ESP32与Arduino之间SPI通信 SPI是串行外设接口(Serial Peripheral Interface)的缩写。是 Motorola 公司推出的一种同步串行接口技术，是一种高速的，全双工，同步的通信总线。 SPI通信协议使用SCK，MOSI，MISO和SS等四条线路。 SPI总线可以有一个主设备和多个从设备。主设备是微控制器，而从设备可以是微控制器，ADC，DAC等。在这里对SPI通信协议不做详细描述，在后期的文章中做专门描述。在前面Ardunio开发实例-两个Ardui

视觉与物联智能 6307

【STM32 CubeMX】SPI层次结构SPI协议与SPI控制器结构

随着嵌入式系统的迅猛发展，STM32系列微控制器在各种应用中得到广泛应用。在嵌入式系统设计中，串行外设接口（SPI）是一种常见且重要的通信协议。为了更便捷地配置和使用SPI，STMicroelectronics提供了一款强大的工具——STM32 CubeMX。本文将着重介绍STM32 CubeMX中SPI的层次结构、SPI协议以及SPI控制器的结构。STM32 CubeMX作为一款强大的开发工具，为嵌入式系统设计提供了便利。

m0_62599305的博客 2161

1、利用Arduino IDE玩转ESP32：物联网开发入门

本文介绍了如何利用Arduino IDE 2.0进行ESP32开发，涵盖物联网的基本概念、ESP32在物联网中的优势、开发环境的搭建与配置，并通过丰富的代码示例讲解了ESP32与各类传感器、执行器、摄像头和显示屏的连接与通信方式。内容包括GPIO控制、PWM调光、UART串口通信、I2C和SPI总线应用，以及使用Wokwi等工具进行项目模拟，适合物联网初学者快速入门并实践ESP32开发。

work3的博客 59

3、使用Arduino IDE和ESP32构建物联网项目

本文详细介绍了如何使用Arduino IDE 2.0和ESP32开发物联网项目。内容涵盖Arduino IDE的安装与界面介绍、ESP32开发环境配置、基础示例程序（如LED闪烁）、硬件模拟工具Wokwi的使用，以及ESP32的GPIO控制、PWM调光、UART串行通信、SPI和I2C总线通信的原理与代码实现。适合初学者快速上手ESP32物联网开发。

work3的博客 121

AI订单流异常检测：精准识别与闭环处置

本文系统阐述了订单流AI驱动的可视化与异常解释系统的构建策略。核心包括：1）多维度融合的异常检测技术，结合数据指纹、行为图谱和时序分析实现精准识别；2）分级分类与自动化处置机制，通过规则矩阵和风险熵值量化进行智能决策；3）基于SHAP/LIME的可解释性技术，提升决策透明度；4）千万级数据训练要求，确保模型达到87%以上的F1值。系统采用Flink+PAI实时计算架构，支持从异常检测到根因分析的完整闭环，为电商、金融等领域的订单风险管理提供智能化解决方案。

2401_83000568的博客 1360

深入解析HAL_UART_Receive_IT：如何高效配置串口中断接收

本文深入解析了STM32 HAL库中`HAL_UART_Receive_IT`函数的工作原理与高效配置方法。该函数并非直接接收数据，而是作为中断接收的启动器和配置器，通过开启相关中断，由`UART_Receive_IT`在后台完成数据搬运。文章详细对比了中断与轮询模式的区别，并提供了不定长数据接收的完整实战流程、常见问题避坑指南及高级应用技巧，帮助开发者构建稳定高效的串口通信。

weixin_29162439的博客 628

如何使用Qt的PIMPL习惯用法（PIMPL Idiom

PIMPL是指“Pointer to IMPLementation”（指向实现的指针），意味着将实现细节隐藏起来，用户类无需关注这些实现细节。在Qt中常用PIMPL习惯用法来清晰地区分接口与实现，尽管Qt官方文档并未详细说明该机制。本文将演示如何在Qt中使用PIMPL习惯用法，并以一个简单的坐标输入对话框作为实例。

电脑管家 1033

关于LIO-SAM编译时出现错误 /usr/bin/ld: 找不到 -lBoost::timer

关于LIO-SAM编译时出现错误：下载LIO-SAM代码进入LIO-SAM文件夹，通过以下代码编译： mkdir build cd build cmake .. make 报错： /usr/bin/ld: 找不到 -lBoost::timer collect2: error: ld returned 1 exit status CMakeFiles/lio_sam_imuPreintegration.dir/build.make:759: recipe for target 'devel/lib/li

wwtx的博客 3648

cuda安装时出现错误 Unable to locate package cuda-toolkit-12-4

4865

Android13配置selinux让system应用可读sys,proc,SN号

Android13预置的system应用，需要读/sys, /proc目录，读(SN)serial number号, 需要修改selinux配置，否则会报avc错．其修改方法会比Android11复杂一些．。

zmlovelx(帅得不敢出门程序员群31843264) 2654

金蝶云星空API实战：从零到一，用Postman打通业务数据流

本文详细介绍了如何使用Postman调试金蝶云星空API，从创建第三方应用到实战调试技巧，帮助开发者快速打通业务数据流。文章重点讲解了API配置的关键细节、常见问题排查方法以及自动化测试方案，提升开发效率与准确性。

weixin_33712987的博客 518

论文Agile Autonomy: Learning High-Speed Flight in the Wild开源代码运行记录

Agile Autonomy: Learning High-Speed Flight in the Wild Learning High-Speed Flight in the Wild 论文链接：https://www.science.org/doi/10.1126/scirobotics.abg5810 代码：https://github.com/uzh-rpg/agile_autonomy 国内复现：https://github.com/Howardcl/AgileAutonomyPX4

Hanamizukimr的博客 1488

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")