2020-11-01

华为AR1220-S、AR2200-S Series 路由器重置（初始化）步骤：

1、系统视图模式下：
set factory-configuration operate-mode delete-configuration
y
factory-configuration reset
y
reboot
y

2、重启完成后输入初始化用户和密码
admin
Admin@huawei 或 huawei

以下是详细步骤：
[Huawei] set factory-configuration operate-mode delete-configuration --①
Warning: It may delete your configuration file when executing factory configuration,are you sure to set the operation mode?[Y/N]:y （这里选择 y ) --②
Info: Successfully set factory config!
[Huawei] factory-configuration reset --③
Warning: It will clean the configuration which you have saved. If you have set the factory-configuration by hand, it will start from the modified factory-configuration, else it will start from the original one, when you restart the device. Continue? [y/n]:y（这里选择 y ） --④
Info: Successfully set factory config!
[Huawei]reboot --⑤
Info: The system is comparing the configuration, please wait.
System will reboot! Continue? [y/n]:y --⑥
Requesting system rebootg, please wait…
[ 3104.432151] Restarting system.

BIOS Creation Date : Mar 13 2018, 15:13:47
DDR DRAM init : OK
Start Memory Test ? (‘t’ or ‘T’ is test):skip
Copying Data : Done
Uncompressing : Done
USB2 Host Stack Initialized.
USB Hub Driver Initialized
USBD Wind River Systems, Inc. 562 Initialized
Octeon Host Controller Initialize…Done.

Press Ctrl+B to break auto startup … 1 （这个不用管，等着系统自己运行即可）
Enter auto startup

Now boot from flash:/AR1220-S-V200R010C10SPC700.cc, please wait…
Check Bootrom version
Check CPLD Version

Get CPLD0 file CPLD_ar1220.bin in packet
CPLD0 version is 0x11072400
CPLD0 in packet version is 0x11072400
CPLD0 version match

Check rootfs version
Get Kernel File Done
Uncompress Kernel Done

Create monitor process

CPLD userspace init ok
Create cap process
Create vrp process
Alloc Name ok SNMP

CPLD userspace init ok

Initializing SMI Bus:OK
Initializing I2C Bus:OK
Backup Bootrom : done

DOPRA initialize…OK
IAS initialize…OK
VRP initialize
FECD IRC Connecting: OK

VRP_SockTm_Init create…OK

Create tasks…OK
Initialize tasks…OK
Recovering configuration…OK

Press any key to get started

Login authentication

Username:admin (华为默认用户和密码) --⑦
Password:********** （输入路由器初始密码：huawei 或 Admin@huawei) --⑧
The password needs to be changed. Change now？[Y/N]:y（这里选择 y ) --⑨
Please enter old password: （华为的默认密码;huawei 或 Admin@huawei）–⑩
Please enter new password: （设置新密码） --11
Please confirm new password: （再输一次新密码） --12
The password has been changed successfully.（显示 successfully 时才是新密码设置成功！）
Warning: The default password is not secure, and it is strongly recommended to change it.
[Huawei] system-view (进入系统视图模式） --13
Enter system view, return user view with Ctrl+Z.
[Huawei] dis cu （查看当前配置） --14