Spring Cloud Circuit Breaker断路器

Spring 源码硬核解析系列专题(二十四):Spring Cloud Circuit Breaker 的断路器源码解析 在前几期中,我们从 Spring 核心到 Spring Boot 的多个模块,再到 Spring Cloud Sleuth,逐步揭示了 Spring 生态在微服务领域的广泛应用。Spring Cloud Circuit Breaker 提供了断路器模式的抽象,支持 Resilience4j、Hystrix 等实现,用于处理服务故障和降级。本篇将深入 Spring Cloud Circuit Breaker 的源码,剖析其核心机制与实现原理,并补充图示。 阅读详情

一、用处

想象一下,你正在玩一款在线游戏,突然间,游戏服务器开始不稳定,频繁出现延迟或者直接连接失败。这时候,如果你的游戏客户端还一直尝试连接服务器,不仅会浪费资源(比如电量、网络流量),而且可能会导致客户端程序卡死,甚至崩溃。

 在软件系统中,服务之间经常互相调用,就像游戏客户端调用服务器一样。当被调用的服务出现问题时(比如响应慢、挂掉),调用者会等待响应,如果大量请求堆积,整个系统可能会陷入瘫痪,就像电网中的过载会导致跳闸一样。  

CircuitBreaker 断路器的作用就是防止这种“服务雪崩”。它的工作原理类似于家里的电路保险丝或断路器:  

1. 闭合状态closed:正常情况下,断路器处于闭合状态,允许服务间的调用像往常一样进行。  

2. 打开状态open:当检测到服务调用失败达到一定阈值(比如连续失败次数过多),断路器会切换到打开状态,阻止进一步的调用尝试。这样可以避免调用者在等待无响应服务时浪费资源,同时也防止了故障扩散。

 3. 半开状态half-open:一段时间后,断路器会进入半开状态,允许少量请求通过,检查服务是否已经恢复。如果服务恢复正常,断路器会回到闭合状态;如果服务仍然有问题,断路器会再次打开。  

二、使用

在微服务架构中,CircuitBreaker(服务熔断)、服务降级、Bulkhead(隔离)和RateLimiter(限流)都是用于增强系统稳定性和响应能力的关键技术。下面我将逐一介绍它们的使用步骤:

CircuitBreaker(服务熔断)  
  • 使用步骤:

1. 引入依赖:

<!--resilience4j-circuitbreaker 熔断策略-->
        <d
Spring Cloud Circuit Breaker 2.0.0 M1 Overview Learn Samples Introduction Spring Cloud Circuit breaker provides an abstraction across different circuit breaker implementations. It provides a consistent API to use in your applications allowing you the developer to choose the circuit breaker im 阅读详情

相关推荐

7.CircuitBreaker断路器

摘要:本文介绍了Resilience4j断路器(Circuit Breaker)在微服务架构中的应用。主要内容包括: 断路器概述:解决分布式系统中的服务雪崩问题,通过快速熔断、服务降级等方式提高系统弹性。 Resilience4j核心功能实现: 熔断机制:基于失败率或慢调用率触发熔断,提供OPEN/HALF_OPEN/CLOSE三种状态转换 舱壁隔离:通过信号量或线程池限制并发请求数量 限流保护:采用各类算法(令牌桶、滑动窗口等)控制请求速率 实战案例: 配置熔断阈值(如6次访问失败率50%触发熔断) 实现

麒麟阁 1188

在Spring Cloud中使用CircuitBreaker实现熔断器

熔断器模式的核心思想是监控服务调用的状态。当失败率超过阈值时,熔断器会进入“打开”状态,后续的调用直接返回预设的降级结果,避免资源耗尽。经过一段时间后,熔断器会尝试进入“半开”状态,允许部分请求通过以检测下游服务是否恢复。通过// 调用远程服务// 方法签名需与原方法一致,最后添加Throwable参数通过Spring Cloud CircuitBreaker,我们可以有效提升微服务架构的弹性。关键在于:正确配置熔断参数设计合理的降级策略结合监控系统及时发现问题新时代农民工。

sg_knight的专栏 759

《Spring Cloud实战指南》04-01:探索Spring Cloud Circuit Breaker

--

西安极客联盟 695

N32在Keil中J-Link识别失败的排查与修复指南

本文详细解析了在Keil开发环境中,J-Link调试器无法识别N32系列MCU的常见问题。通过分步指导,从检查修改Keil工程配置文件、更新J-Link驱动,到手动添加N32专用设备支持包,系统性地提供了排查与修复方案,帮助开发者快速恢复调试连接,确保开发流程顺畅。

307

ArcGIS基础:CAD数据转换为GIS数据(符号化显示、数据转换、线转面、空间连接)

1、符号化显示: CAD数据加载进来有很多列表,包含了点【point】、线【polyline】、面【polygon】、标注数据【Annotation】等数据,本次实验我们需要用到的是面数据,也就是.dwgPolygong格式的数据。如下图所示: 把数据加载进来,然后在2处打开属性表,查看CAD数据的属性表,打开后可以发现【layer】图层表示就是地块的用地性质,它就是符号化显示的依据。 我们在数据上右键【属性】,打开图层属性,找到【符号系统】,选择类别中的【唯一值】,然后在【值字段】下拉选择【layer】,

yuanYW7556的博客 2万+

Cursor+Apifox MCP Server实战:5分钟搞定API自动化测试用例生成

本文详细介绍了如何利用Cursor IDE与Apifox MCP Server,在5分钟内将API文档自动转化为高质量的自动化测试用例。通过配置MCP Server建立数据桥梁,开发者可直接用自然语言指令,让AI基于真实接口规范生成可立即执行的pytest测试代码,大幅提升接口测试效率,特别适合快节奏的SaaS项目。

ooo22的博客 535

计算机视觉之姿态识别(原理+代码实操)

计算机视觉中的姿态识别原理+模型介绍,同时通过代码实操简单的演示基于mediapipe的单人姿态识别。

输出既学习 3万+

LLM Wiki 的完整输入体系:LLM Wiki极简实战

LLM Wiki 的输入分为**四大类**,覆盖从"原始知识注入"到"系统行为控制"的全流程,所有输入都遵循"**原始资料不可变,规则可迭代,人类反馈闭环**"的核心原则。

ZhangJiqun&191cm&85kg 328

SAP DRC 是什么?一文读懂 SAP Document and Reporting Compliance 的定位、架构与落地案例

把视线拉长,会发现SAP DRC的价值并不仅是用来交差的工具。它更像是企业在全球化经营中建设的一套公共底座:既能以最低的重复成本去应对各国不断演进的监管要求,也能为财务数字化与供应链协同提供可信数据回路。依托本地与云的分层职责、与的生态联动、以及按国家不断更新的任务目录,企业可以将合规变成一种标准化、工程化、可持续运营的能力。

2007 年 ~ 2025 年,深耕 SAP 技术 18 年 1659

【社招算法经验贴】算法社招记录

总的来说,也是收获了七七八八的offer,给的涨幅40~100%,职级有的可以对标到 p7(但阿里p7是真难a,a不动)。面了一圈下来,感觉大模型也在收缩hc。尤其是多模态相关hc。凭着上学期间做过相关视觉的work和paper,社招虽然能进面试,但是hc少得可怜,多模态已死慎入。还有大模型应用算法给的涨幅,跟搜广推的涨幅差别不大。真正能几百万往上的是基座pretrain/后训练/infra,但是全靠social和conn,hc极少。

Danger的博客 988

安卓App开发 篇三:Android SDK和API

Jetpack 是一个由多个库组成的套件,可帮助开发者遵循最佳做法、减少模板代码并编写可在各种 Android 版本和设备中一致运行的代码,让开发者可将精力集中于真正重要的编码工作。hl=zh-cnhl=zh-cnWorkManager 是 Android Jetpack 的一部分,是用于持久性工作的推荐解决方案,适用于需要通过应用重启和系统重新启动来调度的工作,也是后台处理操作的主要推荐 API。立即执行:必须立即开始且很快完成的任务,可以加急,使用和Worker,通过对调用处理加急工作。

生活在别处 1293

ET2012新版免狗免安装绿色软件

ET2012新版免狗免安祖昂绿色软件。,新界面,新视觉,

老版QQ原生表情gif动态

这是老版的QQ表情,不过全是动态的的,Windows照片查看器是不会动的,可以右击用浏览器打开查看,再说一遍是老版的,只是分享给宁愿用老版也要动态的人。

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: OpenFeign的通用实现步骤以及OpenFeign高级特性
下一篇: Sleuth(Micrometer) +ZipKin分布式链路追踪的解析以及使用
-今非昔比°
博客等级 码龄5年 213粉丝 83原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

-今非昔比°

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值