如何编写Linux的LCD驱动

android surfaceflinger研究----显示系统 这周抽空研究了一下SurfaceFlinger,发现真正复杂的并不是SurfaceFlinger本身,而是android的display显示系统,网上关于这部分的介绍有不少,本不打算写的,但是发现还是记录一下研究代码的过程比较好,一是能够帮助自己理清思路,另一个原因就是以后当这块内容忘记的时候,能快速的通过这个记录捡起来。     一.  android显示系统的建立     我们看Surfa 阅读详情

Writing Linux LCD drivers

Writing Linux LCD drivers
Abstract
1 LCD Module/Driver/Controller
2 Linux Frame Buffer Driver
2.1 Why Frame Buffer?
2.2 What is Frame Buffer Devices?
2.3 How to Write Frame Buffer Device Drivers?
3 Analysis of Linux Frame Buffer Driver Source Codes
3.1 fb.h
3.2 fbmem.c
4 Skeleton of LCD controller rivers
4.1 Allocate a system memory as video memory
4.2 Implement the fb_ops functions
Reference

Abstract
This material discusses how to write a Linux frame buffer LCD device driver.

1 LCD Module/Driver/Controller

Besides the datasheet of LCD devices, there are two quite good books (.pdf format) on LCD technology. Both of them are written in Chinese. One is “液晶显示技术”, and the other is “液晶显示器件”. The two books give almost all needed LCD knowledge, including introductions to hardware implementation of LCD devices and low level software programming used to operate LCD devices. This helps LCD circuits design and low level LCD programming.

2 Linux Frame Buffer Driver

2.1 Why Frame Buffer?

If GUIs (Graphic User Interface) such as MiniGUI, MicroWindows are used, LCD device drivers must be implemented as Linux frame buffer device drivers in addition to those low level operations which only deal with commands provided by LCD controllers.

2.2 What is Frame Buffer Devices?
The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff.
The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*.
More description about frame buffer device can be found in two txt files: linux /Documentation /fb /framebuffer.txt and linux /Documentation /fb /interal.txt

2.3 How to Write Frame Buffer Device Drivers?
There are few instructive materials about writing frame buffer device drivers. You may find “Linux Frame buffer Driver Writing HOWTO” at this web page http: //linux-fbdev.sourceforge.net /HOWTO /index.html, but the HOWTO is somewhat curt and not enough. So having a look into Linux source codes is necessary. The next section is an analysis of the related source codes.

3 Analysis of Linux Frame Buffer Driver Source Codes

Linux implements Frame Buffer Drivers mainly based on the groundwork of these two files:
1) linux/include/linux/fb.h
2) linux/drivers/video/fbmem.c
It’s time to have a close look at them.

3.1 fb.h
Almost all important structures are defined in this file. First let me describe what each means and how they are used one by one.


1) fb_var_screeninfo
It is used to describe the features of a video card you normally can set. With fb_var_screeninfo, you can define such things as depth and the resolution you want.

struct fb_var_screeninfo {
__u32 xres; /* visible resolution */
__u32 yres;
__u32 xres_virtual; /* virtual resolution */
__u32 yres_virtual;
__u32 xoffset; /* offset from virtual to visible */
__u32 yoffset; /* resolution */

__u32 bits_per_pixel; /* guess what */
__u32 grayscale; /* != 0 Graylevels instead of colors */

struct fb_bitfield red; /* bitfield in fb mem if true color, */
struct fb_bitfield green; /* else only length is significant */
struct fb_bitfield blue;
struct fb_bitfield transp; /* transparency */

__u32 nonstd; /* != 0 Non standard pixel format */

__u32 activate; /* see FB_ACTIVATE_* */

__u32 height; /* height of picture in mm */
__u32 width; /* width of picture in mm */

__u32 accel_flags; /* acceleration flags (hints) */

/* Timing: All values in pixclocks, except pixclock (of course) */
__u32 pixclock; /* pixel clock in ps (pico seconds) */
__u32 left_margin; /* time from sync to picture */
__u32 right_margin; /* time from picture to sync */
__u32 upper_margin; /* time from sync to picture */
__u32 lower_margin;
__u32 hsync_len; /* length of horizontal sync */
__u32 vsync_len; /* length of vertical sync */
__u32 sync; /* see FB_SYNC_* */
__u32 vmode; /* see FB_VMODE_* */
__u32 reserved[6]; /* Reserved for future compatibility */
};

2) fb_fix_screeninfon
It defines the properties of a card that are created when you set a mode and can't be changed otherwise. A good example is the start address of the framebuffer memory. This can depend on what mode is set. Now while using that mode, you don't want to have the memory position change on you. In this case, the video hardware tells you the memory location and you have no say about it.

struct fb_fix_screeninfo {
char id[16]; /* identification string eg "TT Builtin" */
unsigned long smem_start; /* Start of frame buffer mem */
/* (physical address) */
__u32 smem_len; /* Length of frame buffer mem */
__u32 type; /* see FB_TYPE_* */
__u32 type_aux; /* Interleave for interleaved Planes */
__u32 visual; /* see FB_VISUAL_* */
__u16 xpanstep; /* zero if no hardware panning */
__u16 ypanstep; /* zero if no hardware panning */
__u16 ywrapstep; /* zero if no hardware ywrap */
__u32 line_length; /* length of a line in bytes */
unsigned long mmio_start; /* Start of Memory Mapped I/O */
/* (physical address) */
__u32 mmio_len; /* Length of Memory Mapped I/O */
__u32 accel; /* Type of acceleration available */
__u16 reserved[3]; /* Reserved for future compatibility */
};

3) fb_cmap
Device independent colormap information. You can get and set the colormap using the FBIOGETCMAP and FBIOPUTCMAP ioctls.

struct fb_cmap {
__u32 start; /* First entry */
__u32 len; /* Number of entries */
__u16 *red; /* Red values */
__u16 *green;
__u16 *blue;
__u16 *transp; /* transparency, can be NULL */
};

4) fb_info
It defines the current state of the video card. fb_info is only visible from the kernel. Inside of fb_info, there exist a fb_ops which is a collection of needed functions to make driver work.

struct fb_info {
char modename[40]; /* default video mode */
kdev_t node;
int flags;
int open; /* Has this been open already ? */
#define FBINFO_FLAG_MODULE 1 /* Low-level driver is a module */
struct fb_var_screeninfo var; /* Current var */
struct fb_fix_screeninfo fix; /* Current fix */
struct fb_monspecs monspecs; /* Current Monitor specs */
struct fb_cmap cmap; /* Current cmap */
struct fb_ops *fbops;
char *screen_base; /* Virtual address */
struct display *disp; /* initial display variable */
struct vc_data *display_fg; /* Console visible on this display */
char fontname[40]; /* default font name */
devfs_handle_t devfs_handle; /* Devfs handle for new name */
devfs_handle_t devfs_lhandle; /* Devfs handle for compat. symlink */
int (*changevar)(int); /* tell console var has changed */
int (*switch_con)(int, struct fb_info*);
/* tell fb to switch consoles */
int (*updatevar)(int, struct fb_info*);
/* tell fb to update the vars */
void (*blank)(int, struct fb_info*); /* tell fb to (un)blank the screen */
/* arg = 0: unblank */
/* arg > 0: VESA level (arg-1) */
void *pseudo_palette; /* Fake palette of 16 colors and
the cursor's color for non
palette mode */
/* From here on everything is device dependent */
void *par;
};

5) struct fb_ops
User application program can use ioctl() system call to operate low LCD hardware. Methods defined in fb_ops structure are used to support these operations.

struct fb_ops {
/* open/release and usage marking */
struct module *owner;
int (*fb_open)(struct fb_info *info, int user);
int (*fb_release)(struct fb_info *info, int user);
/* get non settable parameters */
int (*fb_get_fix)(struct fb_fix_screeninfo *fix, int con,
struct fb_info *info);
/* get settable parameters */
int (*fb_get_var)(struct fb_var_screeninfo *var, int con,
struct fb_info *info);
/* set settable parameters */
int (*fb_set_var)(struct fb_var_screeninfo *var, int con,
struct fb_info *info);
/* get colormap */
int (*fb_get_cmap)(struct fb_cmap *cmap, int kspc, int con,
struct fb_info *info);
/* set colormap */
int (*fb_set_cmap)(struct fb_cmap *cmap, int kspc, int con,
struct fb_info *info);
/* pan display (optional) */
int (*fb_pan_display)(struct fb_var_screeninfo *var, int con,
struct fb_info *info);
/* perform fb specific ioctl (optional) */
int (*fb_ioctl)(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg, int con, struct fb_info *info);
/* perform fb specific mmap */
int (*fb_mmap)(struct fb_info *info, struct file *file, struct vm_area_struct *vma);
/* switch to/from raster image mode */
int (*fb_rasterimg)(struct fb_info *info, int start);
};

6) structure map
struct fb_info_gen | struct fb_info | fb_var_screeninfo
| | fb_fix_screeninfo
| | fb_cmap
| | modename[40]
| | fb_ops ---|--->ops on var
| | ... | fb_open
| | | fb_release
| | | fb_ioctl
| | | fb_mmap
| struct fbgen_hwswitch -|-> detect
| | encode_fix
| | encode_var
| | decode_fix
| | decode_var
| | get_var
| | set_var
| | getcolreg
| | setcolreg
| | pan_display
| | blank
| | set_disp

[编排有点困难,第一行的第一条竖线和下面的第一列竖线对齐,第一行的第二条竖线和下面的第二列竖线对齐就可以了]
struct fbgen_hwswitch is an abstraction of hardware operations. It is not necessary, but sometimes useful.

3.2 fbmem.c
fbmem.c is at the middle place of frame buffer driver architecture. It provides system calls to support upper user application programs. It also provides an interface to low level drivers for specific hardware. Those low level frame buffer drivers can register themselves into the kernel by this interface. fbmem.c implements the common codes used by all drivers, thus avoids repeated work.

1) Global Varibles

struct fb_info *registered_fb[FB_MAX];
int num_registered_fb;

The two are used to record on-using instance of fb_info structure. fb_info represents the current state of video card. All fb_info structures are globally placed in an array. When a frame buffer registers itself to kernel, a new fb_info is added to this array and num_registered_fb increases 1.

static struct {
const char *name;
int (*init)(void);
int (*setup)(void);
} fb_drivers[] __initdata= { ....};

If frame buffer driver is static linked into kernel, a new entry must be added to this table. If use insmod/rmmod, don’t care this.

static struct file_operations fb_ops ={
owner: THIS_MODULE,
read: fb_read,
write: fb_write,
ioctl: fb_ioctl,
mmap: fb_mmap,
open: fb_open,
release: fb_release
};

This is the interface to user application programs. fbmem.c implements these functions here.

2) register_framebuffer(struct fb_info *fb_info)
unregister_framebuffer(struct fb_info *fb_info)

This is the interface to low level frame buffer device driver. The drivers use this pair of functions to register or unregister themselves.
Almost all the work those low level drivers needed to do is to fill in an fb_info structure and then to (un)register it.

4 Skeleton of LCD controller rivers
LCD drivers operate LCD device hardwares, while fbmem.c records and administrates these drivers. There is a skeleton frame buffer driver in linux /drivers /fb /skeleton.c. It shows how to implement a frame buffer driver with very few codes. Because it is too simple, it does nothing but filling an fb_info and then (un)registering it.
In order to implement a usable LCD controller driver, something else must be added into it. But what should be added? As we all know, device drivers abstract hardware and provide system call interface to user programs. So we can implements the low level hardware operations according to the need of the system call interface, namely the file_operations structure which is discussed in section 3.2.

4.1 Allocate a system memory as video memory
After a careful lookup in fbmem.c, we know that open() and release() method of file_operations structure do not need low level support, while read(), write() and mmap() need a common support function fb_get_fix(). So fb_get_fix() must be provided by driver writers.
Additionally the writer should allocate a system memory as video memory, for most LCD controllers have no their own video memory. The allocated memory start address and length are later placed in smem_start and smem_len fields of fb_fix_screeninfo structure. The allocated memory should be physically consecutive.

4.2 Implement the fb_ops functions
The only method of file_operations still not discussed is ioctl(). User application programs use ioctl() system call to operate LCD hardware. Methods defined in fb_ops structure(section 3.1) are used to support these operations. NOTE: fb_ops structure is NOT file_operations structure. fb_ops is for abstraction of low level operations, while file_operations is for upper level system call interface
Again we’d better first decide which methods should be implemented. ioctl() system call is implemented in fbmem.c, so we turn to it and quickly we can find out such relationship between ioctl() commands and fb_ops’s methods:
FBIOGET_VSCREENINFO fb_get_var
FBIOPUT_VSCREENINFO fb_set_var
FBIOGET_FSCREENINFO fb_get_fix
FBIOPUTCMAP fb_set_cmap
FBIOGETCMAP fb_get_cmap
FBIOPAN_DISPLAY fb_pan_display
Now we know that if we implement these fb_XXX_XXX functions, then user application writers can use FBIOXXXX micros to operate LCD hardwares. But how can we implement them?
It is fine to have a reference to linux/drivers/video/fbgen.c or other drivers under the linux/drivers/video directory.
Among these functions, fb_set_var() is the most important. It is used to set video mode and more. The following is the common steps performed by a fb_set_var() function:
1) Check if mode setting is necessary
2) Set the mode
3) Set colormap
4) Reconfigure the registers of LCD controller according former settings
The fourth step shows where low level operations are placed. Curious men may have such a question: how image data of user application are put onto the screen. Driver writer allocates a system memory as video memory, and later he sets the start address and length of the memory to LCD controller’s registers(often in fb_set_var() function). The content of the memory will be sent to screen automatically by LCD controller(for details, see specific LCD controller). On the other hand, the allocated system memory is mapped to user space by mmap(). Thereby, when a user sends data to the mapped memory, the data will be shown on LCD screen.

Reference

1 液晶显示技术
2 液晶显示器件
3 linux/Documentation/fb/framebuffer.txt
4 linux/Documentation/fb/interal.txt
5 Linux Framebuffer Driver Writing HOWTO
http://linux-fbdev.sourceforge.net/HOWTO /index.html
6 linux/include/linux/fb.h
7 linux/drivers/video/fbmem.c
8 linux/drivers/video/skeletonfb.c
9 linux/drivers/video/fbgen.c
10 linux/drivers/video/tgafb.c
11 s3c2410 microprocessor user manual
s3c2410fb.h, s3c2410fb.c, s3c2410fb.c-pre, s3c2410fb.c-mono
A kind of arm-based widely used MCU, with integrated LCD controller.
12 sed1335 datasheet
A kind of widely used LCD controller

DRM框架(vkms)分析(9)----drm驱动创建fbdevice分析(以rockchip_drm_drv为例) 本文主要介绍DRM框架里的fbdev兼容逻辑 一 framebuffer框架简单介绍 framebuffer框架下fbdev的注册主要三步步: (1)创建fbdev操作函数,以rockchip为例: static const struct fb_ops rockchip_drm_fbdev_ops = { .owner = THIS_MODULE, DRM_FB_HELPER_DEFAULT_OPS, .fb_mmap = rockchip_fbdev_mmap, .fb_fillrec 阅读详情

相关推荐

从基本理解到深入探究 Linux kernel 通知链(notifier chain)

文章目录基本理解Linux kernel 事件通知链深入探究Linux kernel 事件通知链 基本理解Linux kernel 事件通知链 linux/drivers/video/fb_notify.c 一般人会使用这个几个接口就行了,若不想放弃请看下面深入探究Linux kernel 事件通知链。 深入探究Linux kernel 事件通知链 https://blog.csdn.ne...

Wu_Being 的优快云 博客 7461

linux的LCD的驱动编写

IMX6U系列芯片内部自带一个增强型液晶接口外设eLCDIF(Enhanced LCD Interface),配合使用DDR作为显存, 可直接控制液晶面板,无需额外增加液晶控制器芯片。

qq_24093081的博客 1301

Linux设备驱动之LCD显示摄像图像之二编写V4l2程序

LCD显示摄像图像之二编写V4l2程序

Dongxiem 651

基于DirectFB的framebuffer底层驱动及应用程序架构原理分析

本文作者为:铁匠Smith 先生 转载请在显著位置注明出处和链接,否则保留追究相关事务之权利。 一、DirecfFB架构下应用层fbdev系统的初始化     对任何一个dfb应用程序,它在初始化时一定会调用下面两句:       /* DirectFB init */      DirectFBInit( &argc, &argv);      DirectFBCreate(&dfb

铁匠Smith先生的专栏 5838

晶晨S905L3S/S905L3SB芯片刷机实战:BL加载工具与线刷固件全解析

本文针对晶晨S905L3S/S905L3SB芯片电视盒子刷机时常见的2%失败问题,提供了两种核心解决方案。一是使用已集成特殊通信协议的专用版USB Burning Tool(如V2.2.5/V2.2.7),二是采用旧版工具配合独立的BootLoader加载工具。文章详细解析了两种方案的原理、操作步骤、固件选择及常见问题排查,旨在帮助用户成功完成刷机,让老旧设备焕发新生。

weixin_29238147的博客 1114

Tessy学习系列(三):单元测试——官方例程isValueInRange

注意:工程名称以及路劲不能包含空格和中文

不吃鱼的猫的博客 2348

编写基于Linux的lcd驱动

看lcd驱动好几天了,一直找不到突破点,感觉无从下手。今天看了一篇介绍lcd驱动编写的文章,写的很详细,对理解frambuffer以及lcd驱动很有帮助。但是英文的,多多少少有点不习惯,翻译下来留着以后复习的时候再看就方便了。 摘要:     本文详细描述怎样编写linux frambuffer LCD 驱动程序     1. LCD 驱动/设

zy_11162311的专栏 3245

lcd命令 linux,编写基于Linux的lcd驱动

看lcd驱动好几天了,一直找不到突破点,感觉无从下手。今天看了一篇介绍lcd驱动编写的文章,写的很详细,对理解frambuffer以及lcd驱动很有帮助。但是英文的,多多少少有点不习惯,翻译下来留着以后复习的时候再看就方便了。摘要:本文详细描述怎样编写linux frambuffer LCD 驱动程序1. LCD 驱动/设备/控制器2. linux frambuffer 驱动2.1 为什么要用fr...

weixin_42381087的博客 975

MIPI转LVDS芯片调试实战:从Kernel到UEFI的完整点亮流程

本文详细解析了MIPI转LVDS芯片调试的全流程,从Kernel驱动开发到UEFI早期初始化,涵盖I2C通信、电源时序控制等核心挑战。通过LT9211芯片实战案例,提供设备树配置、电源时序优化及显示异常排查等实用技巧,助力工程师高效完成屏幕调试工作。

weixin_30314813的博客 452

什么!!!寒假就要准备暑期实习

介绍暑期实习,从作用,时间线,投递渠道,技术准备,常见问题,经验教训几个方面介绍暑期实习

今天不coding的博客 1726

编写基于linux的lcd驱动

本文来自:http://blog.youkuaiyun.com/yaozhenguo2006/article/details/6791119 编写基于linux的lcd驱动     作者:JimSheng       翻译:窗外云天 yaozhenguo2006@126.com 摘要:     本文详细描述怎样编写linux frambuffer LCD 驱动程序    

ljf69的专栏 1502

RTT(RT-Thread)串口设备(RTT保姆级教程)

本章主要介绍串口设备在RT-Thread操作系统中应用层如何使用。关于串口设备的使用,我们只需要在应用层找到串口设备,然后去初始化,初始化完成以后就可以读写串口设备了。操作的方法在应用层,驱动是不需要我们去完成的,驱动已经在操作系统中提供了。

qq_25218501的博客 1万+

Linux驱动之LCD驱动编写

在Linux驱动之内核自带的S3C2440的LCD驱动分析这篇博客中已经分析了编写LCD驱动的步骤,接下来就按照这个步骤来字尝试字节编写LCD驱动。用的LCD屏幕为tft屏,每个像素点为16bit。对应与红绿蓝分别为565。 1、分配一个fb_info结构 2、设置fb_info结构 3、硬件相关的操作,配置LCD时钟、配置IO端口、配置LCD寄存器。 4、最终注册fbinfo结构到reg...

weixin_30652491的博客 215

《QEMU/KVM源码分析与应用》读书笔记1 —— 第1章 QEMU与KVM概述

《QEMU/KVM源码分析与应用》学习笔记1 —— 第一章 QEMU与KVM概述

phmatthaus的专栏 1989

YOLOv5基于深度学习的道路缺陷检测系统

然而,由于长期的自然侵蚀、车辆磨损等因素,道路表面容易出现裂缝、坑洼等缺陷。这些缺陷不仅会影响驾驶舒适性,还可能引发交通事故,尤其是在恶劣天气或夜间行车条件下。随着人工智能技术的快速发展,基于深度学习的道路缺陷检测技术能够在降低人力成本的同时提高检测效率,为道路维护提供了新的解决方案。本项目构建了基于YOLOv5的道路缺陷检测系统,结合PyQt5开发了用户友好的UI界面,具备实时检测和图片分析功能。工具对图片进行标注,生成YOLO格式的标注文件。上传包含道路裂缝或坑洼的图片,系统会标注出缺陷的位置及类别。

YOLO 1077

Linux下lcd显示图片,lcd驱动程序如何编写显示图片功能

以前没有写Lcd驱动程序,现在开始做项目了,才发现Lcd驱动程序必须认真学习,我总结所以驱动中LCD和网卡驱动是最难的,LCD主要是需要配置的寄存器太多了,还是老规矩先上代码。内核版本:linux-3.4.2 lcd:4.3上代码之前我得讲解一些基本的知识点,LCD驱动我们只需要写硬件这一块的代码就可以了,下面有三个函数内核已经帮我们写好了,我们只需要调用就可以了,这几个函数实现了内核层和应用成数...

weixin_36287955的博客 1120

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

Linux下LCD驱动的编写

    LCD即液晶显示器,显示原理如下:     LCD显示器是由一个一个像素点组成的,像素点类似一个灯,就是RGB灯,由红色、绿色和蓝色三种颜色组成。1080P就是像素数量是1920*1080个。    如何控制RGB三种颜色的显示亮度?一般一个R、G、B这三部分分别使用8bit的数据,一个像素点就是24bit,一个像素点是3个字节,称为RGB888。,再加入8bit的Alpha通道的话一个像素就是4个字节,称为RGB8888。     可以把显示的过程想象成用一根笔在不同的像素点画上不同的颜色,按照从

m0_56561130的博客 691

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

win10 跳过U8环境检测的IE WebControls.rar

win10 安装u8的时候 提示IE WebControls 不通过,这个工具可以欺骗u8的检查。 跳过U8环境检测的IE WebControls。提示导入失败后,重新检测通过。

Linux LCD 驱动程序的编写

基本原理通过 framebuffer ,应用程序用 mmap 把显存映射到应用程序虚拟地址空间,将要显示的数据写入这个内存空间就可以在屏幕上显示出来;驱动程序分配系统内存作为显存;实现 file_operations 结构中的接口,为应用程序服务;实现 fb_ops 结构中的接口,控制和操作 LDC 控制器;驱动程序将显存的起始地址和长度传给 LCD 控制器的寄存器 (一般由 fb

shenbin1430的专栏 1363

jdk-8u144-linux-x64.tar.gz.

该资源为搭建Linux系统Java环境用,资源的后缀为tar.gz格式的压缩包

linux 字符驱动开发详解和ST7735s LCD驱动应用层API编写小结

文章目录前言一、字符设备驱动是什么?有什么用?二、如何编写一个简单的设备驱动程序?1.如何编写Makefile文件?2.编写驱动代码ioctl方法ST7735s lcd 驱动应用层API略讲总结 前言 最近一段时间在看linux的字符设备驱动,看了很多内容但是都没有一个清晰的开发流程。如下我做一个简单的自我学习小结,不足错误之处还请大佬们指出。(使用的开发环境是ubuntu18.04系统,LCD是ST7735s)。 一、字符设备驱动是什么?有什么用? 在John Madieu[法]约翰·马迪厄的linu.

m0_46674523的博客 1220

Linux LCD 驱动编写<二>

环境:linux-2.6.32.2,天嵌2440,东华3.5屏 1 #include <linux/module.h> 2 #include <linux/kernel.h> 3 #include <linux/errno.h> 4 #include <linux/string.h> 5 #include <l...

weixin_30672019的博客 87

Linux驱动之LCD程序编写

在上一节中,分析了内核中的LCD的驱动框架,不要被内核中复杂的调用过程把我们搞迷糊了,总结起来就是以下几点 1、分配fb_info结构体 2、设置fb_info结构体 3、注册fb_info结构体 是不是很简单,软件层面的fbmem.c不需要我们去管,当然,如果你想要去深入分析的话,剩下的硬件层面的代码就做了那么三件事情,这一节,来编写具体的内核LCD驱动,遵循上面的编程流程 先来分配一个结构体,然后去设置它,在设置的时候要注意,fb_info结构体中有一个成员是固定的,就是表示这个设备的一些常用的参数,比

weixin_41791581的博客 506

linux LCD 驱动编写(四)

一、应用程序访问驱动原理 LCD驱动程序 假设 app: open("/dev/fb0", ...) 主设备号: 29, 次设备号: 0 -------------------------------------------------------------- kernel: fb_open int fbidx = iminor(inode...

shenlong1356的博客 779

linux驱动LCD 驱动程序代码编写

转自 在编写代码之前我们先来看一看原理图         引脚说明: VCLK:发出lcd时钟信号,每来一个时钟,就会在屏幕上显示一个像素      ——GPC1  :配置为lcd引脚 VLINE:发出lcd行扫描信号                                                                    

我的专栏 5304
上一篇: 关于WinCE驱动编写时的IO地址映射
下一篇: 登山的过程总是艰难的
仰泳的鱼儿
博客等级 码龄24年 42粉丝 84原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值