文章探讨了WlanAPI的核心概念，展示了源代码片段，特别强调了Wi-FiDirect服务的属性定义与操作函数，如服务地址、名称、信息及配置方法等，同时提及了处理会话打开与关闭的API函数。
Wlan概述：
想必各位读者家里都有路由器（Wifi），路由器的原理很简单，早在一百多年前，人们就发明了Wifi的原理。如果你有十个亲戚，而且你与每个亲戚之间都要互相打电话，那么就要铺55（10+9+8+...+2+1，小学经典数学题）根电话线，天价啊！！！于是一个老六思想闪耀登场，设立一个中转站，所有客户端连接到中转站，那么就只需要10根线，此想法是不是很不错呢？
推荐一个网址：解剖路由器
什么是API？
API（Application Programming Interface），指应用程序编程接口。
WlanAPI源代码：
/*++
Copyright (c) 2004 Microsoft Corporation
Module Name:
wlanapi.h
Abstract:
Definitions and data strcutures for wlan auto config client side API.
Environment:
User mode only
Revision History:
11/8/2004 created
--*/
#ifndef _WLAN_WLANAPI_H
#define _WLAN_WLANAPI_H
#pragma once
#include <winapifamily.h>
#pragma region Desktop Family
#if WINAPI_FAMILY_PARTITION(WINAPI_PARTITION_DESKTOP)
#include <l2cmn.h>
#include <windot11.h>
#include <EapTypes.h>
#ifdef __cplusplus
extern "C" {
#endif
#ifndef _WIN32_WINNT
#error _WIN32_WINNT must be defined to use WLAN API. It could be either _WIN32_WINNT_WIN7, _WIN32_WINNT_VISTA, or _WIN32_WINNT_WINXP, and so on.
#endif
// major version is in low-order WORD,
// minor version is in high-order WORD
#define WLAN_API_VERSION_1_0 0x00000001
#define WLAN_API_VERSION_2_0 0x00000002
#define WLAN_API_VERSION_MAJOR(_v) ((_v) & 0xffff)
#define WLAN_API_VERSION_MINOR(_v) (((DWORD)(_v)) >> 16)
#define WLAN_API_MAKE_VERSION(_major, _minor) (((DWORD)(_minor)) << 16 | (_major))
// WLAN API is version 1 in all WinXP
// and version 2 in Vista
#if (_WIN32_WINNT >= _WIN32_WINNT_VISTA)
#define WLAN_API_VERSION WLAN_API_VERSION_2_0
#else
#if (_WIN32_WINNT >= _WIN32_WINNT_WINXP)
#define WLAN_API_VERSION WLAN_API_VERSION_1_0
#else
#error WLAN API is not supported on platform earlier than Windows XP.
#endif // (_WIN32_WINNT >= _WIN32_WINNT_WINXP)
#endif // (_WIN32_WINNT >= _WIN32_WINNT_VISTA)
// maximum length of name, in characters
#define WLAN_MAX_NAME_LENGTH L2_PROFILE_MAX_NAME_LENGTH
// profile flags
#define WLAN_PROFILE_GROUP_POLICY 0x00000001
#define WLAN_PROFILE_USER 0x00000002
#define WLAN_PROFILE_GET_PLAINTEXT_KEY 0x00000004
// the following flags are only used for WlanSaveTemporaryProfile API
#define WLAN_PROFILE_CONNECTION_MODE_SET_BY_CLIENT 0x00010000
#define WLAN_PROFILE_CONNECTION_MODE_AUTO 0x00020000
// EAPHost data storage flags
#define WLAN_SET_EAPHOST_DATA_ALL_USERS 0x00000001
// struct WLAN_PROFILE_INFO defines the basic information of an 802.11 network profile
typedef struct _WLAN_PROFILE_INFO {
WCHAR strProfileName[WLAN_MAX_NAME_LENGTH];
DWORD dwFlags;
} WLAN_PROFILE_INFO, *PWLAN_PROFILE_INFO;
typedef struct _DOT11_NETWORK {
DOT11_SSID dot11Ssid;
DOT11_BSS_TYPE dot11BssType;
} DOT11_NETWORK, *PDOT11_NETWORK;
// proximity service discovery IE specific definitions
// the maximum data size in one PSD IE data entry (payload), in bytes
#define DOT11_PSD_IE_MAX_DATA_SIZE 240
// the maximum number of PSD IE data entries
#define DOT11_PSD_IE_MAX_ENTRY_NUMBER 5
typedef struct _WLAN_RAW_DATA {
// size of the data blob
DWORD dwDataSize;
#ifdef __midl
[unique, size_is(dwDataSize)] BYTE DataBlob[*];
#else
BYTE DataBlob[1];
#endif
} WLAN_RAW_DATA, *PWLAN_RAW_DATA;
typedef struct _WLAN_RAW_DATA_LIST {
DWORD dwTotalSize;
DWORD dwNumberOfItems;
struct {
// the beginning of the data blob
// the offset is w.r.t. the beginning of the entry
DWORD dwDataOffset;
// size of the data blob
DWORD dwDataSize;
} DataList[1];
} WLAN_RAW_DATA_LIST, *PWLAN_RAW_DATA_LIST;
typedef enum _WLAN_CONNECTION_MODE {
wlan_connection_mode_profile = 0,
wlan_connection_mode_temporary_profile,
wlan_connection_mode_discovery_secure,
wlan_connection_mode_discovery_unsecure,
wlan_connection_mode_auto,
wlan_connection_mode_invalid
} WLAN_CONNECTION_MODE, *PWLAN_CONNECTION_MODE;
// Wlan reason code
//
// They are put in the following range:
// each component got 0x1000 numbers, within which:
// the first half is for capability mismatch reason,
// the second half for connect/security error reason.
//
// !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
// IMPORTANT: If you add/remove a reason code, please
// modify the corresponding entry in wlanres.h and wlanres.rc
// and the corresponding mapping in wlanapi.c
typedef DWORD WLAN_REASON_CODE, *PWLAN_REASON_CODE;
#define WLAN_REASON_CODE_SUCCESS L2_REASON_CODE_SUCCESS
// general codes
#define WLAN_REASON_CODE_UNKNOWN L2_REASON_CODE_UNKNOWN
#define WLAN_REASON_CODE_RANGE_SIZE L2_REASON_CODE_GROUP_SIZE
#define WLAN_REASON_CODE_BASE L2_REASON_CODE_DOT11_AC_BASE
// range for Auto Config
//
#define WLAN_REASON_CODE_AC_BASE L2_REASON_CODE_DOT11_AC_BASE
#define WLAN_REASON_CODE_AC_CONNECT_BASE (WLAN_REASON_CODE_AC_BASE + WLAN_REASON_CODE_RANGE_SIZE / 2)
#define WLAN_REASON_CODE_AC_END (WLAN_REASON_CODE_AC_BASE + WLAN_REASON_CODE_RANGE_SIZE - 1)
// range for profile manager
// it has profile adding failure reason codes, but may not have
// connection reason codes
//
#define WLAN_REASON_CODE_PROFILE_BASE L2_REASON_CODE_PROFILE_BASE
#define WLAN_REASON_CODE_PROFILE_CONNECT_BASE (WLAN_REASON_CODE_PROFILE_BASE + WLAN_REASON_CODE_RANGE_SIZE / 2)
#define WLAN_REASON_CODE_PROFILE_END (WLAN_REASON_CODE_PROFILE_BASE + WLAN_REASON_CODE_RANGE_SIZE - 1)
// range for MSM
//
#define WLAN_REASON_CODE_MSM_BASE L2_REASON_CODE_DOT11_MSM_BASE
#define WLAN_REASON_CODE_MSM_CONNECT_BASE (WLAN_REASON_CODE_MSM_BASE + WLAN_REASON_CODE_RANGE_SIZE / 2)
#define WLAN_REASON_CODE_MSM_END (WLAN_REASON_CODE_MSM_BASE + WLAN_REASON_CODE_RANGE_SIZE - 1)
// range for MSMSEC
//
#define WLAN_REASON_CODE_MSMSEC_BASE L2_REASON_CODE_DOT11_SECURITY_BASE
#define WLAN_REASON_CODE_MSMSEC_CONNECT_BASE (WLAN_REASON_CODE_MSMSEC_BASE + WLAN_REASON_CODE_RANGE_SIZE / 2)
#define WLAN_REASON_CODE_MSMSEC_END (WLAN_REASON_CODE_MSMSEC_BASE + WLAN_REASON_CODE_RANGE_SIZE - 1)
// range for codes reserved for system usage
//
#define WLAN_REASON_CODE_RESERVED_BASE L2_REASON_CODE_RESERVED_BASE
#define WLAN_REASON_CODE_RESERVED_END (WLAN_REASON_CODE_RESERVED_BASE + WLAN_REASON_CODE_RANGE_SIZE - 1)
// AC network incompatible reason codes
//
#define WLAN_REASON_CODE_NETWORK_NOT_COMPATIBLE (WLAN_REASON_CODE_AC_BASE +1)
#define WLAN_REASON_CODE_PROFILE_NOT_COMPATIBLE (WLAN_REASON_CODE_AC_BASE +2)
// AC connect reason code
//
#define WLAN_REASON_CODE_NO_AUTO_CONNECTION (WLAN_REASON_CODE_AC_CONNECT_BASE +1)
#define WLAN_REASON_CODE_NOT_VISIBLE (WLAN_REASON_CODE_AC_CONNECT_BASE +2)
#define WLAN_REASON_CODE_GP_DENIED (WLAN_REASON_CODE_AC_CONNECT_BASE +3)
#define WLAN_REASON_CODE_USER_DENIED (WLAN_REASON_CODE_AC_CONNECT_BASE +4)
#define WLAN_REASON_CODE_BSS_TYPE_NOT_ALLOWED (WLAN_REASON_CODE_AC_CONNECT_BASE +5)
#define WLAN_REASON_CODE_IN_FAILED_LIST (WLAN_REASON_CODE_AC_CONNECT_BASE +6)
#define WLAN_REASON_CODE_IN_BLOCKED_LIST (WLAN_REASON_CODE_AC_CONNECT_BASE +7)
#define WLAN_REASON_CODE_SSID_LIST_TOO_LONG (WLAN_REASON_CODE_AC_CONNECT_BASE +8)
#define WLAN_REASON_CODE_CONNECT_CALL_FAIL (WLAN_REASON_CODE_AC_CONNECT_BASE +9)
#define WLAN_REASON_CODE_SCAN_CALL_FAIL (WLAN_REASON_CODE_AC_CONNECT_BASE +10)
#define WLAN_REASON_CODE_NETWORK_NOT_AVAILABLE (WLAN_REASON_CODE_AC_CONNECT_BASE +11)
#define WLAN_REASON_CODE_PROFILE_CHANGED_OR_DELETED \
(WLAN_REASON_CODE_AC_CONNECT_BASE +12)
#define WLAN_REASON_CODE_KEY_MISMATCH (WLAN_REASON_CODE_AC_CONNECT_BASE + 13)
#define WLAN_REASON_CODE_USER_NOT_RESPOND (WLAN_REASON_CODE_AC_CONNECT_BASE + 14)
#define WLAN_REASON_CODE_AP_PROFILE_NOT_ALLOWED_FOR_CLIENT \
(WLAN_REASON_CODE_AC_CONNECT_BASE + 15)
#define WLAN_REASON_CODE_AP_PROFILE_NOT_ALLOWED (WLAN_REASON_CODE_AC_CONNECT_BASE + 16)
#define WLAN_REASON_CODE_HOTSPOT2_PROFILE_DENIED \
(WLAN_REASON_CODE_AC_CONNECT_BASE + 17)
// Profile validation errors
//
#define WLAN_REASON_CODE_INVALID_PROFILE_SCHEMA (WLAN_REASON_CODE_PROFILE_BASE +1)
#define WLAN_REASON_CODE_PROFILE_MISSING (WLAN_REASON_CODE_PROFILE_BASE +2)
#define WLAN_REASON_CODE_INVALID_PROFILE_NAME (WLAN_REASON_CODE_PROFILE_BASE +3)
#define WLAN_REASON_CODE_INVALID_PROFILE_TYPE (WLAN_REASON_CODE_PROFILE_BASE +4)
#define WLAN_REASON_CODE_INVALID_PHY_TYPE (WLAN_REASON_CODE_PROFILE_BASE +5)
#define WLAN_REASON_CODE_MSM_SECURITY_MISSING (WLAN_REASON_CODE_PROFILE_BASE +6)
#define WLAN_REASON_CODE_IHV_SECURITY_NOT_SUPPORTED \
(WLAN_REASON_CODE_PROFILE_BASE +7)
#define WLAN_REASON_CODE_IHV_OUI_MISMATCH (WLAN_REASON_CODE_PROFILE_BASE +8)
// IHV OUI not present but there is IHV settings in profile
#define WLAN_REASON_CODE_IHV_OUI_MISSING (WLAN_REASON_CODE_PROFILE_BASE +9)
// IHV OUI is present but there is no IHV settings in profile
#define WLAN_REASON_CODE_IHV_SETTINGS_MISSING (WLAN_REASON_CODE_PROFILE_BASE +10)
// both/conflict MSMSec and IHV security settings exist in profile
#define WLAN_REASON_CODE_CONFLICT_SECURITY (WLAN_REASON_CODE_PROFILE_BASE +11)
// no IHV or MSMSec security settings in profile
#define WLAN_REASON_CODE_SECURITY_MISSING (WLAN_REASON_CODE_PROFILE_BASE +12)
#define WLAN_REASON_CODE_INVALID_BSS_TYPE (WLAN_REASON_CODE_PROFILE_BASE +13)
#define WLAN_REASON_CODE_INVALID_ADHOC_CONNECTION_MODE \
(WLAN_REASON_CODE_PROFILE_BASE +14)
#define WLAN_REASON_CODE_NON_BROADCAST_SET_FOR_ADHOC \
(WLAN_REASON_CODE_PROFILE_BASE +15)
#define WLAN_REASON_CODE_AUTO_SWITCH_SET_FOR_ADHOC \
(WLAN_REASON_CODE_PROFILE_BASE +16)
#define WLAN_REASON_CODE_AUTO_SWITCH_SET_FOR_MANUAL_CONNECTION \
(WLAN_REASON_CODE_PROFILE_BASE +17)
#define WLAN_REASON_CODE_IHV_SECURITY_ONEX_MISSING \
(WLAN_REASON_CODE_PROFILE_BASE +18)
#define WLAN_REASON_CODE_PROFILE_SSID_INVALID (WLAN_REASON_CODE_PROFILE_BASE +19)
#define WLAN_REASON_CODE_TOO_MANY_SSID (WLAN_REASON_CODE_PROFILE_BASE +20)
#define WLAN_REASON_CODE_IHV_CONNECTIVITY_NOT_SUPPORTED \
(WLAN_REASON_CODE_PROFILE_BASE +21)
#define WLAN_REASON_CODE_BAD_MAX_NUMBER_OF_CLIENTS_FOR_AP \
(WLAN_REASON_CODE_PROFILE_BASE +22)
#define WLAN_REASON_CODE_INVALID_CHANNEL (WLAN_REASON_CODE_PROFILE_BASE +23)
#define WLAN_REASON_CODE_OPERATION_MODE_NOT_SUPPORTED \
(WLAN_REASON_CODE_PROFILE_BASE +24)
#define WLAN_REASON_CODE_AUTO_AP_PROFILE_NOT_ALLOWED \
(WLAN_REASON_CODE_PROFILE_BASE +25)
#define WLAN_REASON_CODE_AUTO_CONNECTION_NOT_ALLOWED \
(WLAN_REASON_CODE_PROFILE_BASE +26)
#define WLAN_REASON_CODE_HOTSPOT2_PROFILE_NOT_ALLOWED \
(WLAN_REASON_CODE_PROFILE_BASE +27)
// MSM network incompatible reasons
//
#define WLAN_REASON_CODE_UNSUPPORTED_SECURITY_SET_BY_OS \
(WLAN_REASON_CODE_MSM_BASE +1)
#define WLAN_REASON_CODE_UNSUPPORTED_SECURITY_SET \
(WLAN_REASON_CODE_MSM_BASE +2)
#define WLAN_REASON_CODE_BSS_TYPE_UNMATCH (WLAN_REASON_CODE_MSM_BASE +3)
#define WLAN_REASON_CODE_PHY_TYPE_UNMATCH (WLAN_REASON_CODE_MSM_BASE +4)
#define WLAN_REASON_CODE_DATARATE_UNMATCH (WLAN_REASON_CODE_MSM_BASE +5)
// MSM connection failure reasons, to be defined
// failure reason codes
//
// user called to disconnect
#define WLAN_REASON_CODE_USER_CANCELLED (WLAN_REASON_CODE_MSM_CONNECT_BASE+1)
// got disconnect while associating
#define WLAN_REASON_CODE_ASSOCIATION_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+2)
// timeout for association
#define WLAN_REASON_CODE_ASSOCIATION_TIMEOUT (WLAN_REASON_CODE_MSM_CONNECT_BASE+3)
// pre-association security completed with failure
#define WLAN_REASON_CODE_PRE_SECURITY_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+4)
// fail to start post-association security
#define WLAN_REASON_CODE_START_SECURITY_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+5)
// post-association security completed with failure
#define WLAN_REASON_CODE_SECURITY_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+6)
// security watchdog timeout
#define WLAN_REASON_CODE_SECURITY_TIMEOUT (WLAN_REASON_CODE_MSM_CONNECT_BASE+7)
// got disconnect from driver when roaming
#define WLAN_REASON_CODE_ROAMING_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+8)
// failed to start security for roaming
#define WLAN_REASON_CODE_ROAMING_SECURITY_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+9)
// failed to start security for adhoc-join
#define WLAN_REASON_CODE_ADHOC_SECURITY_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+10)
// got disconnection from driver
#define WLAN_REASON_CODE_DRIVER_DISCONNECTED (WLAN_REASON_CODE_MSM_CONNECT_BASE+11)
// driver operation failed
#define WLAN_REASON_CODE_DRIVER_OPERATION_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+12)
// Ihv service is not available
#define WLAN_REASON_CODE_IHV_NOT_AVAILABLE (WLAN_REASON_CODE_MSM_CONNECT_BASE+13)
// Response from ihv timed out
#define WLAN_REASON_CODE_IHV_NOT_RESPONDING (WLAN_REASON_CODE_MSM_CONNECT_BASE+14)
// Timed out waiting for driver to disconnect
#define WLAN_REASON_CODE_DISCONNECT_TIMEOUT (WLAN_REASON_CODE_MSM_CONNECT_BASE+15)
// An internal error prevented the operation from being completed.
#define WLAN_REASON_CODE_INTERNAL_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+16)
// UI Request timed out.
#define WLAN_REASON_CODE_UI_REQUEST_TIMEOUT (WLAN_REASON_CODE_MSM_CONNECT_BASE+17)
// Roaming too often, post security is not completed after 5 times.
#define WLAN_REASON_CODE_TOO_MANY_SECURITY_ATTEMPTS (WLAN_REASON_CODE_MSM_CONNECT_BASE+18)
// Failed to start AP
#define WLAN_REASON_CODE_AP_STARTING_FAILURE (WLAN_REASON_CODE_MSM_CONNECT_BASE+19)
// MSMSEC reason codes
//
#define WLAN_REASON_CODE_MSMSEC_MIN WLAN_REASON_CODE_MSMSEC_BASE
// Key index specified is not valid
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_KEY_INDEX (WLAN_REASON_CODE_MSMSEC_BASE+1)
// Key required, PSK present
#define WLAN_REASON_CODE_MSMSEC_PROFILE_PSK_PRESENT (WLAN_REASON_CODE_MSMSEC_BASE+2)
// Invalid key length
#define WLAN_REASON_CODE_MSMSEC_PROFILE_KEY_LENGTH (WLAN_REASON_CODE_MSMSEC_BASE+3)
// Invalid PSK length
#define WLAN_REASON_CODE_MSMSEC_PROFILE_PSK_LENGTH (WLAN_REASON_CODE_MSMSEC_BASE+4)
// No auth/cipher specified
#define WLAN_REASON_CODE_MSMSEC_PROFILE_NO_AUTH_CIPHER_SPECIFIED (WLAN_REASON_CODE_MSMSEC_BASE+5)
// Too many auth/cipher specified
#define WLAN_REASON_CODE_MSMSEC_PROFILE_TOO_MANY_AUTH_CIPHER_SPECIFIED (WLAN_REASON_CODE_MSMSEC_BASE+6)
// Profile contains duplicate auth/cipher
#define WLAN_REASON_CODE_MSMSEC_PROFILE_DUPLICATE_AUTH_CIPHER (WLAN_REASON_CODE_MSMSEC_BASE+7)
// Profile raw data is invalid (1x or key data)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_RAWDATA_INVALID (WLAN_REASON_CODE_MSMSEC_BASE+8)
// Invalid auth/cipher combination
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_AUTH_CIPHER (WLAN_REASON_CODE_MSMSEC_BASE+9)
// 802.1x disabled when it's required to be enabled
#define WLAN_REASON_CODE_MSMSEC_PROFILE_ONEX_DISABLED (WLAN_REASON_CODE_MSMSEC_BASE+10)
// 802.1x enabled when it's required to be disabled
#define WLAN_REASON_CODE_MSMSEC_PROFILE_ONEX_ENABLED (WLAN_REASON_CODE_MSMSEC_BASE+11)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_PMKCACHE_MODE (WLAN_REASON_CODE_MSMSEC_BASE+12)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_PMKCACHE_SIZE (WLAN_REASON_CODE_MSMSEC_BASE+13)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_PMKCACHE_TTL (WLAN_REASON_CODE_MSMSEC_BASE+14)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_PREAUTH_MODE (WLAN_REASON_CODE_MSMSEC_BASE+15)
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_PREAUTH_THROTTLE (WLAN_REASON_CODE_MSMSEC_BASE+16)
// PreAuth enabled when PMK cache is disabled
#define WLAN_REASON_CODE_MSMSEC_PROFILE_PREAUTH_ONLY_ENABLED (WLAN_REASON_CODE_MSMSEC_BASE+17)
// Capability matching failed at network
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_NETWORK (WLAN_REASON_CODE_MSMSEC_BASE+18)
// Capability matching failed at NIC
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_NIC (WLAN_REASON_CODE_MSMSEC_BASE+19)
// Capability matching failed at profile
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_PROFILE (WLAN_REASON_CODE_MSMSEC_BASE+20)
// Network does not support specified discovery type
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_DISCOVERY (WLAN_REASON_CODE_MSMSEC_BASE+21)
// Passphrase contains invalid character
#define WLAN_REASON_CODE_MSMSEC_PROFILE_PASSPHRASE_CHAR (WLAN_REASON_CODE_MSMSEC_BASE+22)
// Key material contains invalid character
#define WLAN_REASON_CODE_MSMSEC_PROFILE_KEYMATERIAL_CHAR (WLAN_REASON_CODE_MSMSEC_BASE+23)
// Wrong key type specified for the auth/cipher pair
#define WLAN_REASON_CODE_MSMSEC_PROFILE_WRONG_KEYTYPE (WLAN_REASON_CODE_MSMSEC_BASE+24)
// "Mixed cell" suspected (AP not beaconing privacy, we have privacy enabled profile)
#define WLAN_REASON_CODE_MSMSEC_MIXED_CELL (WLAN_REASON_CODE_MSMSEC_BASE+25)
// Auth timers or number of timeouts in profile is incorrect
#define WLAN_REASON_CODE_MSMSEC_PROFILE_AUTH_TIMERS_INVALID (WLAN_REASON_CODE_MSMSEC_BASE+26)
// Group key update interval in profile is incorrect
#define WLAN_REASON_CODE_MSMSEC_PROFILE_INVALID_GKEY_INTV (WLAN_REASON_CODE_MSMSEC_BASE+27)
// "Transition network" suspected, trying legacy 802.11 security
#define WLAN_REASON_CODE_MSMSEC_TRANSITION_NETWORK (WLAN_REASON_CODE_MSMSEC_BASE+28)
// Key contains characters which do not map to ASCII
#define WLAN_REASON_CODE_MSMSEC_PROFILE_KEY_UNMAPPED_CHAR (WLAN_REASON_CODE_MSMSEC_BASE+29)
// Capability matching failed at profile (auth not found)
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_PROFILE_AUTH (WLAN_REASON_CODE_MSMSEC_BASE+30)
// Capability matching failed at profile (cipher not found)
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_PROFILE_CIPHER (WLAN_REASON_CODE_MSMSEC_BASE+31)
// Safe mode value is invalid
#define WLAN_REASON_CODE_MSMSEC_PROFILE_SAFE_MODE (WLAN_REASON_CODE_MSMSEC_BASE+32)
// Profile requires safe mode, not supported by NIC
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_PROFILE_SAFE_MODE_NIC (WLAN_REASON_CODE_MSMSEC_BASE+33)
// Profile requires safe mode, not supported by network
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_PROFILE_SAFE_MODE_NW (WLAN_REASON_CODE_MSMSEC_BASE+34)
// Profile has unsupported auth
#define WLAN_REASON_CODE_MSMSEC_PROFILE_UNSUPPORTED_AUTH (WLAN_REASON_CODE_MSMSEC_BASE+35)
// Profile has unsupported cipher
#define WLAN_REASON_CODE_MSMSEC_PROFILE_UNSUPPORTED_CIPHER (WLAN_REASON_CODE_MSMSEC_BASE+36)
//If Network requires MFP and NIC does not suppport MFP
#define WLAN_REASON_CODE_MSMSEC_CAPABILITY_MFP_NW_NIC (WLAN_REASON_CODE_MSMSEC_BASE+37)
// Failed to queue UI request
#define WLAN_REASON_CODE_MSMSEC_UI_REQUEST_FAILURE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+1)
// 802.1x authentication did not start within configured time
#define WLAN_REASON_CODE_MSMSEC_AUTH_START_TIMEOUT (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+2)
// 802.1x authentication did not complete within configured time
#define WLAN_REASON_CODE_MSMSEC_AUTH_SUCCESS_TIMEOUT (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+3)
// Dynamic key exchange did not start within configured time
#define WLAN_REASON_CODE_MSMSEC_KEY_START_TIMEOUT (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+4)
// Dynamic key exchange did not succeed within configured time
#define WLAN_REASON_CODE_MSMSEC_KEY_SUCCESS_TIMEOUT (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+5)
// Message 3 of 4 way handshake has no key data (RSN/WPA)
#define WLAN_REASON_CODE_MSMSEC_M3_MISSING_KEY_DATA (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+6)
// Message 3 of 4 way handshake has no IE (RSN/WPA)
#define WLAN_REASON_CODE_MSMSEC_M3_MISSING_IE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+7)
// Message 3 of 4 way handshake has no Group Key (RSN)
#define WLAN_REASON_CODE_MSMSEC_M3_MISSING_GRP_KEY (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+8)
// Matching security capabilities of IE in M3 failed (RSN/WPA)
#define WLAN_REASON_CODE_MSMSEC_PR_IE_MATCHING (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+9)
// Matching security capabilities of Secondary IE in M3 failed (RSN)
#define WLAN_REASON_CODE_MSMSEC_SEC_IE_MATCHING (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+10)
// Required a pairwise key but AP configured only group keys
#define WLAN_REASON_CODE_MSMSEC_NO_PAIRWISE_KEY (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+11)
// Message 1 of group key handshake has no key data (RSN/WPA)
#define WLAN_REASON_CODE_MSMSEC_G1_MISSING_KEY_DATA (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+12)
// Message 1 of group key handshake has no group key
#define WLAN_REASON_CODE_MSMSEC_G1_MISSING_GRP_KEY (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+13)
// AP reset secure bit after connection was secured
#define WLAN_REASON_CODE_MSMSEC_PEER_INDICATED_INSECURE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+14)
// 802.1x indicated there is no authenticator but profile requires 802.1x
#define WLAN_REASON_CODE_MSMSEC_NO_AUTHENTICATOR (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+15)
// Plumbing settings to NIC failed
#define WLAN_REASON_CODE_MSMSEC_NIC_FAILURE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+16)
// Operation was cancelled by caller
#define WLAN_REASON_CODE_MSMSEC_CANCELLED (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+17)
// Key was in incorrect format
#define WLAN_REASON_CODE_MSMSEC_KEY_FORMAT (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+18)
// Security downgrade detected
#define WLAN_REASON_CODE_MSMSEC_DOWNGRADE_DETECTED (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+19)
// PSK mismatch suspected
#define WLAN_REASON_CODE_MSMSEC_PSK_MISMATCH_SUSPECTED (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+20)
// Forced failure because connection method was not secure
#define WLAN_REASON_CODE_MSMSEC_FORCED_FAILURE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+21)
// Message 3 of 4 way handshake contains too many RSN IE (RSN)
#define WLAN_REASON_CODE_MSMSEC_M3_TOO_MANY_RSNIE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+22)
// Message 2 of 4 way handshake has no key data (RSN Adhoc)
#define WLAN_REASON_CODE_MSMSEC_M2_MISSING_KEY_DATA (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+23)
// Message 2 of 4 way handshake has no IE (RSN Adhoc)
#define WLAN_REASON_CODE_MSMSEC_M2_MISSING_IE (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+24)
#define WLAN_REASON_CODE_MSMSEC_AUTH_WCN_COMPLETED (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+25)
// Message 3 of 4 way handshake has no Mgmt Group Key (RSN)
#define WLAN_REASON_CODE_MSMSEC_M3_MISSING_MGMT_GRP_KEY (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+26)
// Message 1 of group key handshake has no group mgmt key
#define WLAN_REASON_CODE_MSMSEC_G1_MISSING_MGMT_GRP_KEY (WLAN_REASON_CODE_MSMSEC_CONNECT_BASE+27)
#define WLAN_REASON_CODE_MSMSEC_MAX WLAN_REASON_CODE_MSMSEC_END
typedef ULONG WLAN_SIGNAL_QUALITY, *PWLAN_SIGNAL_QUALITY;
// available network flags
#define WLAN_AVAILABLE_NETWORK_CONNECTED 0x00000001 // This network is currently connected
#define WLAN_AVAILABLE_NETWORK_HAS_PROFILE 0x00000002 // There is a profile for this network
#define WLAN_AVAILABLE_NETWORK_CONSOLE_USER_PROFILE 0x00000004 // The profile is the active console user's per user profile
#define WLAN_AVAILABLE_NETWORK_INTERWORKING_SUPPORTED 0x00000008 // Interworking is supported
#define WLAN_AVAILABLE_NETWORK_HOTSPOT2_ENABLED 0x00000010 // Hotspot2 is enabled
#define WLAN_AVAILABLE_NETWORK_ANQP_SUPPORTED 0x00000020 // ANQP is supported
#define WLAN_AVAILABLE_NETWORK_HOTSPOT2_DOMAIN 0x00000040 // Domain network
#define WLAN_AVAILABLE_NETWORK_HOTSPOT2_ROAMING 0x00000080 // Roaming network
#define WLAN_AVAILABLE_NETWORK_AUTO_CONNECT_FAILED 0x00000100 // This network failed to connect
// flags that control the list returned by WlanGetAvailableNetworkList
// include all ad hoc network profiles in the available network list, regardless they are visible or not
#define WLAN_AVAILABLE_NETWORK_INCLUDE_ALL_ADHOC_PROFILES 0x00000001
// include all hidden network profiles in the available network list
最低0.47元/天 解锁文章
扫一扫
1337
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
