51xx 加UART功能

微信wgc_1314_520

于 2024-05-08 09:34:22 发布

阅读量630

点赞数 10

文章标签： java linux 运维 stm32 单片机 51单片机嵌入式硬件

本文链接：https://blog.youkuaiyun.com/Alex_886/article/details/138558678

版权

这篇博客介绍了如何在51单片机上添加UART功能，通过ADK配置工具设置UART参数。用户需要在QMDE中创建新的Sink应用，将提供的文件复制到项目中，并在配置文件中启用UART模块。应用运行时，会通过UART发送和接收数据。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

51xx 加UART功能

This set of files enables the user to create a UART Configuration Module to set various UART parameters with the ADK Configuration Tool
This README should be read in conjunction with the Application Note (80-CF917-1): Customizing Configuration Modules in ADK4.2+/ADK6+/QCC300x
Available on https://createpoint.qti.qualcomm.com

The code example has been tested on a modified Sink Application from ADK6.1 running on a CE446 board with CE692 module.

How to use it
=============

1. Create a new Sink Application in QMDE - File > New Project > ...

2. Copy the "apps" folder (and its content) from this archive to the <project_path> root folder (typically "C:\qtil\<MyProjects>\<Project>")

3. Replace files when asked

4. In the "config_build.mak" file, under "# Check for additional modules that are incl