墨衍会员
·
AI 创作全网分发
墨衍智能分发
本文由作者通过墨衍一键同步至各平台
1分发平台
2.4k累计阅读
2.5k平均单平台
已同步平台
优快云
微信公众号
微博
知乎
掘金
百家号
博客园
抖音
小红书
你的文章也可以这样分发
墨衍会员 ¥399起/年，写一次发全网
我也要
学完web第一站就到了Javaweb这儿，web和Javaweb之间可是有很多相通的地方，想要做出一个合格的网页，web和Javaweb一个都不能少，但你真的做好准备学习Javaweb了吗？
先别着急骂，我要是不戳戳你们的痛处，给你们喂点毒鸡汤，你们拖延症、懒癌症就真的没得治了，毕竟我也是良苦用心。干了这碗毒鸡汤，披上勤奋好学的皮。趁着现在学的还不算多，赶紧查漏补缺！
PS：下面这些就是要学习javaweb、ssm框架要具备的基础知识，亡羊补牢为时未晚，快去牧羊吧：
动力节点B站的Java视频路线资源，非常全面
作为动力节点的铁杆粉丝，从刚开始接触Java就跟着动力节点的路线去学，一直到去年找到了还不错的工作，我今天整理了他们的学习资源，java学习路线和相关的学习视频，如果是零基础入门java的小伙伴，跟着这个路线可以节省很多时间。 这里有所有前沿技术，从基础到项目实战，而且是最新的教程，按照这个顺序学就完了！ 一、Java基础阶段 【B站排名第一的】Java零基础视频844集（适合Java 0基础，Java初学入门） https://www.bilibili.com/video/BV1Rx411.
抄表程序员的DLMS/COSEM协议实战：从抓包到解析，手把手教你读懂IEC62056报文
本文深入解析DLMS/COSEM协议在智能电表通信中的应用，从报文捕获到数据解析的全流程实战指南。涵盖HDLC帧解析、应用层连接建立、数据请求/响应解码等核心内容，并提供Wireshark配置、OBIS代码速查表等实用工具，帮助开发者快速掌握IEC62056标准下的电能表通信技术。
华为硬件工程师笔试题
1、基尔霍夫定理的内容是什么?(仕兰微电子) 基尔霍夫定理包括电流定律和电压定律。 电流定律(KCL)：在集总电路中，任何时刻，对任一结点，所有流出结点的支路电流的代数和恒等于零。 电压定律(KVL)：在集总电路中，任何时刻，沿任一回路，所有支路电压的代数和恒等于零。 2、平板电容公式(C=εS/4πkd)。(未知) 3、最基本的如三极管曲线特性。(未知) 4、描述反馈电路...
WinForm布局
登录模板页面UILoginForm
Cadence Allegro 17.4学习记录开始00
Cadence Allegro 有三个版本，16.6,17.2,17.4。现在主要学习最新的版本17.4.原理图设计：OrCADPCB设计：Allegro主要用到的就下面三个图片软件：PCB Editor 17.4 是用来画PCB和元器件封装的;Padstack Editor 17.4 是用来画元器件焊盘的；Capture CIS 17.4 是用来画原理图和原理图库的。其实Cadence还有很多功能，现在计划先学习以上内容，后面熟悉了这个软件，还可以继续学习放仿真等功能。
Serial RapidIO Gen2 IP 说明（三）
前言 继续接着上篇文章，介绍Serial RapidIO Gen2 IP 的具体端口信息。 一、端口描述 1、缓冲设计接口 2、物理层接口 参考说明 【1】Serial RapidIO Gen2 v4.1https://china.xilinx.com/content/dam/xilinx/support/documentation/ip_documentation/srio_gen2/v4_1/pg007_srio_gen2.pdf ...
YOLOv8-pose姿态估计模型从训练到RK3588部署：让边缘端骨骼识别速度突破60FPS
本教程从“模型训练-转换-边缘部署”全链路拆解了YOLOv8-pose姿态估计方案在RK3588上的落地过程，每一步都经过实战验证。无论是智能健身的动作实时纠正，还是工业设备的关键部件姿态检测，这套流程都能让你以最低成本实现高精度、高实时性的姿态估计应用。如果你在实践中遇到模型转换报错、部署性能不达标等问题，可聚焦某一环节深入优化——毕竟，让AI在边缘端“精准捕捉每一个关键点”，才是技术驱动场景创新的核心。
【Dumper-7】入门指南 - 带你领略不一样的UE世界
摘要： Dumper-7是一款用于分析UE4/UE5游戏的逆向工具，可自动生成游戏内部结构的C++ SDK。支持Visual Studio、CMake和Xmake三种构建方式，通过DLL注入目标游戏后，自动识别引擎结构并输出C++ SDK文件（默认保存在C:\Dumper-7目录）。该工具适用于游戏Mod开发、安全研究和机制分析，提供完整的类层次映射、属性/函数识别功能。使用时需注意x64平台配置，生成SDK后可集成到自定义DLL项目中，通过示例代码展示如何查找游戏对象、访问世界状态和调用引擎函数。
FM1288回声消除芯片调试方案 - 综述
专栏文章概览
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
汉书HE8，好用的汇编代码编写工具
汉书HE8，好用的汇编代码编写工具早期编写汇编代码所用功能强大
RU DOS版、EFI版32bit/64bit BIOS常用工具
DOS版、EFI版的RU工具，可用来查看IO、MEM、PCI、SMBIOS等资源。亲测在EFI SHELL下可用。
jdk-8u144-linux-x64.tar.gz.
该资源为搭建Linux系统Java环境用，资源的后缀为tar.gz格式的压缩包
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
1086
扫一扫
