【计算机专业毕设】基于python校园车辆管理系统的设计与实现

✍✍计算机毕业编程指导师**
⭐⭐个人介绍:自己非常喜欢研究技术问题!专业做Java、Python、小程序、安卓、大数据、爬虫、Golang、大屏等实战项目。
⛽⛽实战项目:有源码或者技术上的问题欢迎在评论区一起讨论交流!
⚡⚡
Java、Python、小程序、大数据实战项目集

⚡⚡文末获取源码

校园车辆管理系统-研究背景

一、课题背景 随着我国高校规模的不断扩大,校园车辆数量日益增多,车辆管理问题逐渐凸显。传统的车辆管理模式已无法满足现代校园的用车需求,严重影响了校园的交通秩序和师生的生活质量。因此,构建一个高效、便捷的校园车辆管理系统显得尤为重要。

二、现有解决方案存在的问题 当前,虽然部分高校已开始尝试使用信息化手段进行车辆管理,但这些系统普遍存在功能单一、用户体验差、数据安全性不足等问题。这些问题限制了校园车辆管理系统的实际应用效果,使得车辆管理依然面临诸多挑战。

三、课题研究目的与价值 本课题旨在研究并实现一个基于Python Vue的校园车辆管理系统,以解决现有解决方案中存在的问题。课题的理论意义在于探索现代信息技术在校园车辆管理领域的应用,提升车辆管理效率。实际意义则体现在:一方面,提高校园车辆管理水平,保障师生出行安全;另一方面,为我国高校车辆管理提供一种新的模式,具有广泛的推广价值。

校园车辆管理系统-技术

开发语言:Java+Python
数据库:MySQL
系统架构:B/S
后端框架:SSM/SpringBoot(Spring+SpringMVC+Mybatis)+Django
前端:Vue+ElementUI+HTML+CSS+JavaScript+jQuery+Echarts

校园车辆管理系统-视频展示

【计算机专业毕设】基于python校园车辆管理系统的设计与实现

校园车辆管理系统-图片展示

在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述
在这里插入图片描述

校园车辆管理系统-代码展示

pip install Flask Flask-SQLAlchemy
# app.py

from flask import Flask, request, jsonify
from flask_sqlalchemy import SQLAlchemy

app = Flask(__name__)
app.config['SQLALCHEMY_DATABASE_URI'] = 
### OSPF Point-to-Multipoint Configuration with MGRE Tunneling Explanation and Setup Guide #### Understanding the Basics of OSPF Point-to-Multipoint Networks In a point-to-multipoint network type within OSPF, routers do not elect Designated Routers (DRs) or Backup Designated Routers (BDRs). Neighbors are established directly between endpoints. The default Hello interval is set to 30 seconds while the Dead interval stands at 120 seconds[^1]. This configuration simplifies neighbor establishment but requires careful planning when integrating advanced features like Multi-Point GRE tunnels. #### Introduction to Multi-Point GRE Tunnels Multi-Point GRE (mGRE) allows multiple remote sites to connect through a single virtual interface on an endpoint device without requiring individual physical interfaces for each connection. mGRE can significantly reduce complexity in hub-and-spoke topologies by enabling dynamic tunnel creation based on IPsec policies or other criteria. #### Combining OSPF Point-to-Multipoint Network Type with mGRE When combining these two technologies: - **Hub Router**: Configured as both ends of all spokes' mGRE sessions. - **Spoke Routers**: Each configured individually pointing back towards the central hub router's public address over which they will establish their respective mGRE session(s). The combination leverages OSPF’s ability to form adjacencies easily across non-broadcast multi-access networks such as those created via mGRE tunnels. It also benefits from OSPF's inherent support for point-to-multipoint configurations where DR/BDR elections aren't necessary due to direct adjacency formation among participating nodes. #### Example Configuration Steps for Hub Router Using Huawei CLI Syntax Below demonstrates how one might configure this scenario using commands similar to what would be found in a typical enterprise-grade environment provided by vendors like Huawei. ```shell # Enter system view mode system-view # Create loopback interface used for establishing mGRE connections interface LoopBack0 ip address 192.168.1.1 255.255.255.255 # Configure real Ethernet port that connects outside world interface GigabitEthernet0/0/1 ip address dhcp # Define mGRE template tunnel-template gre multipoint name mgre-tpl source-interface LoopBack0 destination any # Apply mGRE settings onto actual tunnel interface interface Tunnel0 undo ip address tunnel-protocol gre multipoint apply tunnel-template mgre-tpl ospf enable area 0 ``` For spoke routers, replace `source-interface` command under `tunnel-template` section accordingly depending upon local addressing scheme; ensure consistency throughout entire deployment regarding naming conventions applied here too. #### Verification Commands After Setup Completion Once completed successfully, verify operation status utilizing following instructions available inside most modern networking gear including models produced by companies mentioned earlier: ```shell display ospf peer brief # Check current state of OSPF peers display ip routing-table # Review learned routes after convergence has occurred ping -a <Source_IP> <Destination_IP> # Test reachability between different segments involved ``` --related questions-- 1. How does changing OSPF hello/dead timers affect stability in large-scale deployments? 2. What considerations should administrators take into account before implementing mGRE solutions? 3. Can you explain more about configuring OSPF route-id specifically for devices running OSPF protocol? 4. In what scenarios could deploying OSPF stub areas improve performance compared against standard ones?
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值