this error was generated by TI's USCIF driver解决办法汇总

最新推荐文章于 2025-04-27 11:10:44 发布

跃睿

最新推荐文章于 2025-04-27 11:10:44 发布

阅读量3.9w

点赞数 1

本文链接：https://blog.youkuaiyun.com/mcy478643968/article/details/6290823

版权

在使用合众达510仿真器进行CCS3.3连接时遇到错误0x80000240和0x80002240，错误提示与TI的USCIF驱动有关。问题可能源于仿真器驱动未正确安装，表现为'xdsfast3.dll'文件大小异常。解决方案是删除该文件，断开连接并重新安装驱动，确保驱动安装后的'xdsfast3.dll'文件大小为352K。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

使用的合众达510仿真器，安装完仿真器驱动后可以用驱动安装包带的usb20emurst.exe来复位仿真器，但是进行CCS3.3后connect开发板会报下面的错误。

Error connecting to the target:

Error 0x80000240/-172

Fatal Error during: Initialization, OCS,

This error was generated by TI's USCIF driver.

SC_ERR_REG_DETECT_SPRT <-172>

The wrong support-logic address value has been used.

A controller cannot be detected even though the

selected port does match the hardware configuration.

The standard 560 ports are 0x0, 0x1, 0x2 and 0x3.

The standard EVM ports are 0x0, 0x1, 0x2 and 0x3.

The standard DSK ports are 0x378, 0x278 and 0x3BC.

The standard 510 ports are 0x240, 0x280, 0x320 and 0x340.

I/O Port = 240

Board Name: C64xx SEEDXDS510USB Emulator

Cpu Name: TMS320C6400_0

Abort: Close Code Com