HTTP proxy problem – Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:8080

本文介绍了在使用Apache作为HTTP代理服务器时遇到的权限拒绝错误,并提供了详细的解决方案,包括如何检查配置文件及运行命令来调整安全设置。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

http://www.techiegyan.com/2008/08/31/http-proxy-problem-permission-denied-proxy-http-attempt-to-connect-to-1270018080/


Problem: Few days back we were working with Apache web server and were using it for proxy. We want to use HTTPD for directing requests to 8080 port where Apache tomcat was running.

We configured the proxy settings successfully and it was working perfect. Following is the example of settings for proxy configuration:

proxy_* modules should be loaded for correct execution of this setting. Check /etc/httpd/conf/httpd.conf file to verify whether modules are loaded or not (proxy_* modules should not be commented in the file)

Add following lines in etc/httpd/conf/httpd.conf file :

ProxyRequests Off

ProxyPass /app1 http://127.0.0.1:8080/app1
ProxyPassReverse /app1 http://127.0.0.1:8080/app1

ProxyPass /app2 http://127.0.0.1:8080/app2
ProxyPassReverse /app2 http://127.0.0.1:8080/app2

one fine day we were unabe to access app1 and app2 using proxy, when we checked logs we found following error in error_log (/etc/httpd/logs/error_log)

[error] (13)Permission denied: proxy: HTTP: attempt to connect to 127.0.0.1:8080 (127.0.0.1) failed
[error] ap_proxy_connect_backend disabling worker for (127.0.0.1)

Solution: Run following command

# /usr/sbin/setsebool httpd_can_network_connect 1
OR
# /usr/sbin/setsebool httpd_can_network_connect true

Or you can also set the security settings, Go to Security Level configurations and Change Tab to SELinux. And modify SELinux policy Check “Allow HTTPD scripts and modules to connect to the network” under HTTPD service. 

<think>我们正在讨论如何配置curl命令使用Burp Suite的代理进行请求测试。根据引用[1]和引用[2]中的信息,Burp Suite默认监听127.0.0.1:8080,并且支持HTTPHTTPS代理。引用[1]提到,当使用HTTPS代理时,客户端会发送CONNECT请求,而非代理感知客户端则直接进行SSL协商。Burp的不可见代理模式可以容忍直接SSL协商并从Host头中解析目标主机。 因此,使用curl通过Burp代理发送请求,需要指定代理为Burp监听的地址(通常是127.0.0.1:8080)。对于HTTPHTTPS请求,curl的代理设置方式相同,但HTTPS请求会通过CONNECT方法建立隧道。 步骤: 1. 确保Burp Suite代理已经启动并监听(默认127.0.0.1:8080)。 2. 在curl命令中使用`-x`或`--proxy`选项指定代理。 例如: - 发送HTTP请求: ```bash curl -x http://127.0.0.1:8080 http://example.com ``` 或者 ```bash curl --proxy http://127.0.0.1:8080 http://example.com ``` - 发送HTTPS请求: ```bash curl -x http://127.0.0.1:8080 https://example.com ``` 注意:由于HTTPS请求需要经过代理,Burp会作为中间人,因此需要信任Burp的CA证书,否则curl会报证书错误。 解决方法: 1. 导出Burp的CA证书(在Burp中,Proxy -> Options -> Proxy Listeners -> 选中监听器 -> Import / export CA certificate -> 导出为DER格式或PEM格式)。 2. 将导出的证书转换为PEM格式(如果是DER格式,使用openssl转换): ```bash openssl x509 -inform DER -in burp_ca.der -out burp_ca.pem ``` 3. 在curl命令中使用`--cacert`选项指定该证书: ```bash curl -x http://127.0.0.1:8080 --cacert /path/to/burp_ca.pem https://example.com ``` 或者,如果你信任该证书,可以临时忽略证书验证(不推荐,但用于测试): ```bash curl -x http://127.0.0.1:8080 -k https://example.com ``` 另外,如果Burp配置了用户认证(如Proxy -> Options -> Proxy Listeners -> Edit -> Require Authentication),则需要在curl中提供代理认证信息: ```bash curl -x http://username:password@127.0.0.1:8080 http://example.com ``` 总结: - 基本代理设置:使用`-x`或`--proxy`参数指定代理地址。 - 处理HTTPS:需要信任Burp的CA证书(使用`--cacert`)或忽略证书验证(`-k`)。 - 代理认证:如果需要,在代理地址中包含用户名和密码。 相关问题: 1. 如何导出Burp Suite的CA证书? 2. 如何在curl中忽略SSL证书验证? 3. 如何配置Burp Suite的代理认证?</think>### 配置 curl 使用 Burp Suite 代理的完整指南 #### 1. **基础代理设置** 在 curl 命令中通过 `-x` 或 `--proxy` 参数指定 Burp 代理地址(默认 `127.0.0.1:8080`): ```bash # HTTP 请求 curl -x http://127.0.0.1:8080 http://example.com # HTTPS 请求(需额外处理证书) curl -x http://127.0.0.1:8080 https://example.com ``` > 📌 验证:在 Burp 的 **ProxyHTTP history** 中查看捕获的请求[^2]。 --- #### 2. **HTTPS 请求的特殊处理** 由于 Burp 会拦截 HTTPS 流量生成自己的证书,需让 curl 信任 Burp 的 CA 证书: 1. **导出 Burp CA 证书**: Burp → **Proxy → Options → Import/export CA certificate** → 导出为 `burp_ca.pem` 2. **在 curl 中指定证书**: ```bash curl -x http://127.0.0.1:8080 --cacert /path/to/burp_ca.pem https://example.com ``` > ⚠️ 若跳过验证(仅测试环境使用): > `curl -x http://127.0.0.1:8080 -k https://example.com` --- #### 3. **代理认证配置(如启用)** 若 Burp 设置了代理认证(**Proxy Listeners → Edit → Require Authentication**): ```bash # 在 URL 中直接包含凭据 curl -x http://username:password@127.0.0.1:8080 http://example.com # 或通过头部单独传递 curl -x http://127.0.0.1:8080 -H "Proxy-Authorization: Basic $(echo -n 'user:pass' | base64)" http://example.com ``` --- #### 4. **调试与日志记录** - **查看详细代理交互**: ```bash curl -v -x http://127.0.0.1:8080 http://example.com ``` - **保存捕获的流量**: ```bash curl -x http://
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值