64位Ubuntu kylin 16.04使用fastboot下载内核到tiny4412开发板

1.编译内核,使用官方的linux-3.5-20151029.tgz

2.解压进入内核目录

3.cp tiny4412_linux_defconfig .config

4.make menuconfig

System Type  --->

[ ] Support TrustZone-enabled Trusted Execution Environment     #去掉这个选项

Kernel hacking  --->

[*] Kernel low-level debugging functions (read help!)     #选择这个

保存退出。

5.make

6.编译完成后

运行minicom终端:fastboot 

ENVY # fastboot

如果提示如下错误:

Error: No MBR is found at SD/MMC. 

Hint: use fdisk command to make partitions.

则先执行指令"fdisk -c 0",执行过程如下:

SMDKV210 # fdisk -c 0 

fdisk is completed 


[Partition table on MoviNAND]
ptn 0 name='fwbl1' start=0x1000A len=N/A (use hard-coded info. (cmd: movi)
ptn 1 name='bl2' start=N/A len=N/A (use hard-coded info. (cmd: movi))
ptn 2 name='bootloader' start=N/A len=N/A (use hard-coded info. (cmd: mov)
ptn 3 name='tzsw' start=N/A len=N/A (use hard-coded info. (cmd: movi))
ptn 4 name='kernel' start=N/A len=N/A (use hard-coded info. (cmd: movi))
ptn 5 name='ramdisk' start=N/A len=0x6800(~27262976KB) (use hard-coded in)
ptn 6 name='system' start=0x1000A len=0x501D8(~336027648KB) 
ptn 7 name='userdata' start=0x1000A len=0x202605(~-2137517056KB) 
ptn 8 name='cache' start=0x1000A len=0x822FF(~546044928KB) 
ptn 9 name='fat' start=0x1000A len=0xADE2F(~729332736KB) 
OTG cable Connected!

另外一个终端:sudo fastboot flash kernel zImage

 sudo fastboot flash ramdisk ramdisk-u.img     #此文件为友善官方文件

 sudo fastboot flash fat rootfs_qtopia_qt4.img     #此文件为友善官方文件

7,重启开发板即可




windows下使用我的工具

驱动:

安装驱动提示签名不对,可以关闭

linux ubuntu fastboot 下载 方法1: GSI Flashing Procedure For Android-Q Fresh Launch Build(DP Enabled): Flash META Change directory to Apps path Flash below Apps and GSI image. Apps Build flashing fastboot flash persist persist.img cd secondary-boot fastboot flash boot_a boot.img (boot.img image for CTS-on-GSI, boot-debug.img for VTS testing) fastboot flash dtbo_a dtbo.img fastboot flash recovery_a recovery.img fastboot flash super super.img fastboot flash userdata userdata.img fastboot flash vbmeta_a vbmeta.img fastboot flash vbmeta_system_a vbmeta_system.img GSI Flashing steps: fastboot reboot fastboot fastboot flash system fastboot -w fastboot flashing lock fastboot reboot NOTE: Dynamic Partition mandatory for android-Q Fresh Launch devices. Device should not come out of fastboot mode between Apps flashing and GSI flashing. For Android-Q Upgraded Build or Android-P Builds: Apps and GSI image flashing: fastboot flash userdata userdata.img fastboot flash persist persist.img cd secondary-boot fastboot flash boot_a boot.img fastboot flash dtbo_a dtbo.img fastboot flash vendor_a vendor.img fastboot flash system_a fastboot --disable-verification flash vbmeta_a vbmeta.img fastboot flashing lock fastboot reboot 方法2: 这个版本刷GSI时,oem unlock的操作有更新如下: adb reboot-bootloader fastboot oem sim-allowunlock (允许解锁) fastboot flashing unlock (这里需要按 音量上键 确认) adb reboot-bootloader fastboot flash system system_xxxxxxxxxxx.img fastboot --disable-verification flash vbmeta vbmeta.img fastboot reboot 取消验证,取消AVB验证 fastboot --disable-verification flash vbmeta vbmeta.img 之后就可以通过fastboot烧录boot.img vendor.img system.img 单独烧录。 3.4 AndroidO userdebug版本刷机时禁止dm-verity AndroidO dm-verity disable flag存在于vbmeta.img(keystore分区)中;而老版本是放置在system.img分区的dm-verity metadata中。 1)在设置中打开OEM unlocking选项 2)在设置中打开USB debugging选项 3)adb reboot bootloader 4)fastboot flashing unlock和fastboot oem unlock 5)fastboot --disable-verity --disable-verification flash vbmeta vbmet
fastboot android10版本 ubuntu linux平台 fastboot version 28.0.2-PD02.200305.0422 $ fastboot -h usage: fastboot [OPTION...] COMMAND... flashing: update ZIP Flash all partitions from an update.zip package. flashall Flash all partitions from $ANDROID_PRODUCT_OUT. On A/B devices, flashed slot is set as active. Secondary images may be flashed to inactive slot. flash PARTITION [FILENAME] Flash given partition, using the image from $ANDROID_PRODUCT_OUT if no filename is given. basics: devices [-l] List devices in bootloader (-l: with device paths). getvar NAME Display given bootloader variable. reboot [bootloader] Reboot device. locking/unlocking: flashing lock|unlock Lock/unlock partitions for flashing flashing lock_critical|unlock_critical Lock/unlock 'critical' bootloader partitions. flashing get_unlock_ability Check whether unlocking is allowed (1) or not(0). advanced: erase PARTITION Erase a flash partition. format[:FS_TYPE[:SIZE]] PARTITION Format a flash partition. set_active SLOT Set the active slot. oem [COMMAND...] Execute OEM-specific command. gsi wipe|disable Wipe or disable a GSI installation (fastbootd only). boot image: boot KERNEL [RAMDISK [SECOND]] Download and boot kernel from RAM. flash:raw PARTITION KERNEL [RAMDISK [SECOND]] Create boot image and flash it. --dtb DTB Specify path to DTB for boot image header version 2. --cmdline CMDLINE Override kernel command line. --base ADDRESS Set kernel base address (default: 0x10000000). --kernel-offset Set kernel offset (default: 0x00008000). --ramdisk-offset Set ramdisk offset (default: 0x01000000)
评论 3
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值