错误: 初始值设定项里有未知的字段‘ioctl’

本文介绍Linux内核3.0.0.15版本中file_operation结构体的变化,详细说明ioctl函数被移除及替代方案,并对比2.6.30.4版本的定义。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

这个错误网上搜索发现3.0.0.15版本内核 file_operation结构体已经删除了ioctl函数,取代的是:
long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
long (*compat_ioctl) (struct file *, unsigned int, unsigned long);

file_operation结构体在 /usr/src/linux-3.0.0.15/include/linux/fs.h定义。

1546 struct file_operations {  
1547         struct module *owner;  
1548         loff_t (*llseek) (struct file *, loff_t, int);  
1549         ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);  
1550         ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);  
1551         ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);  
1552         ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);  
1553         int (*readdir) (struct file *, void *, filldir_t);  
1554         unsigned int (*poll) (struct file *, struct poll_table_struct *);  
1555         long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);  
1556         long (*compat_ioctl) (struct file *, unsigned int, unsigned long);  
1557         int (*mmap) (struct file *, struct vm_area_struct *);  
1558         int (*open) (struct inode *, struct file *);  
1559         int (*flush) (struct file *, fl_owner_t id);  
1560         int (*release) (struct inode *, struct file *);  
1561         int (*fsync) (struct file *, int datasync);  
1562         int (*aio_fsync) (struct kiocb *, int datasync);  
1563         int (*fasync) (int, struct file *, int);  
1564         int (*lock) (struct file *, int, struct file_lock *);  
1565         ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);  
1566         unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);  
1567         int (*check_flags)(int);  
1568         int (*flock) (struct file *, int, struct file_lock *);  
1569         ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);  
1570         ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);  
1571         int (*setlease)(struct file *, long, struct file_lock **);  
1572         long (*fallocate)(struct file *file, int mode, loff_t offset,  
1573                           loff_t len);  
1574 };  
2.6.30.4中file_operation的定义如下:

1484 struct file_operations {  
1485         struct module *owner;  
1486         loff_t (*llseek) (struct file *, loff_t, int);  
1487         ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);  
1488         ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);  
1489         ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);  
1490         ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);  
1491         int (*readdir) (struct file *, void *, filldir_t);  
1492         unsigned int (*poll) (struct file *, struct poll_table_struct *);  
1493         int (*ioctl) (struct inode *, struct file *, unsigned int, unsigned long);  
1494         long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);  
1495         long (*compat_ioctl) (struct file *, unsigned int, unsigned long);  
1496         int (*mmap) (struct file *, struct vm_area_struct *);  
1497         int (*open) (struct inode *, struct file *);  
1498         int (*flush) (struct file *, fl_owner_t id);  
1499         int (*release) (struct inode *, struct file *);  
1500         int (*fsync) (struct file *, struct dentry *, int datasync);  
1501         int (*aio_fsync) (struct kiocb *, int datasync);  
1502         int (*fasync) (int, struct file *, int);  
1503         int (*lock) (struct file *, int, struct file_lock *);  
1504         ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);  
1505         unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);  
1506         int (*check_flags)(int);  
1507         int (*flock) (struct file *, int, struct file_lock *);  
1508         ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int);  
1509         ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int);  
1510         int (*setlease)(struct file *, long, struct file_lock **);  
1511 };  

在file_operation 赋值处修改:
.unlocked_ioctl = xxx_ioctl

一、综合实战—使用极轴追踪方式绘制信号灯 实战目标:利用对象捕捉追踪和极轴追踪功能创建信号灯图形 技术要点:结合两种追踪方式实现精确绘图,适用于工程制图中需要精确定位的场景 1. 切换至AutoCAD 操作步骤: 启动AutoCAD 2016软件 打开随书光盘中的素材文件 确认工作空间为"草图与注释"模式 2. 绘图设置 1)草图设置对话框 打开方式:通过"工具→绘图设置"菜单命令 功能定位:该对话框包含捕捉、追踪等核心绘图辅助功能设置 2)对象捕捉设置 关键配置: 启用对象捕捉(F3快捷键) 启用对象捕捉追踪(F11快捷键) 勾选端点、中心、圆心、象限点等常用捕捉模式 追踪原理:命令执行时悬停光标可显示追踪矢量,再次悬停可停止追踪 3)极轴追踪设置 参数设置: 启用极轴追踪功能 设置角度增量为45度 确认后退出对话框 3. 绘制信号灯 1)绘制圆形 执行命令:"绘图→圆→圆心、半径"命令 绘制过程: 使用对象捕捉追踪定位矩形中心作为圆心 输入半径值30并按Enter确认 通过象限点捕捉确保圆形位置准确 2)绘制直线 操作要点: 选择"绘图→直线"命令 捕捉矩形上边中点作为起点 捕捉圆的上象限点作为终点 按Enter结束当前直线命令 重复技巧: 按Enter可重复最近使用的直线命令 通过圆心捕捉和极轴追踪绘制放射状直线 最终形成完整的信号灯指示图案 3)完成绘制 验证要点: 检查所有直线是否准确连接圆心和象限点 确认极轴追踪的45度增量是否体现 保存绘图文件(快捷键Ctrl+S)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值