uboot从bootm跳到内核

最新推荐文章于 2024-07-24 14:55:53 发布

yuanlulu

最新推荐文章于 2024-07-24 14:55:53 发布

阅读量4.4k

点赞数 1

文章标签： struct image linux os command header

本文链接：https://blog.youkuaiyun.com/yuanlulu/article/details/6279726

版权

uboot 专栏收录该内容

5 篇文章

订阅专栏

============================================
作者：yuanlulu
http://blog.youkuaiyun.com/yuanlulu

版权没有，但是转载请保留此段声明
============================================

main_loop中执行的最重要的操作便是引导内核。引导分两步。第一步先读取内核镜像uImage到内存。然后再使用bootm引导内核。
读取内核只是进行内存复制，因此仅仅需要分析bootm。

/*******************************************************************/
/* bootm - boot application image from image in memory */
/*******************************************************************/
引导应用程序在内存中的镜像。
common/cmd_bootm.c
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
    ulong        iflag;
    ulong        load_end = 0;
    int        ret;
    boot_os_fn    *boot_fn;
    /* determine if we have a sub command */检查是否有子命令
    if (argc > 1) {
        char *endp;
        simple_strtoul(argv[1], &endp, 16);  //调用字符串转无符号整形的函数，endp指向尾字符。
        /* endp pointing to NULL means that argv[1] was just a
         * valid number, pass it along to the normal bootm processing 以空字符结尾则当作是合法的数，作为正常引导的参数
         *
         * If endp is ':' or '#' assume a FIT identifier so pass
         * along for normal processing.
         *
         * Right now we assume the first arg should never be '-'
         */ 
        if ((*endp != 0) && (*endp != ':') && (*endp != '#'))    //是否有子命令。一般不会有，所以这个路径不会执行。
            return do_bootm_subcommand(cmdtp, flag, argc, argv);
    }
    if (bootm_start(cmdtp, flag, argc, argv)) //bootm_start的分析见下一篇文章。这个函数执行成功返回0，失败返回1。这个函数主要用于获取镜像的信息并存入images。
        return 1;
    /*
     * We have reached the point of no return: we are going to
     * overwrite all exception vector code, so we cannot easily
     * recover from any failures any more...
     */
    iflag = disable_interrupts();//禁用中断。
    ret = bootm_load_os(images.os, &load_end, 1);//将镜像的数据从images.os.image_start复制到images.os.load  打印：Loading Kernel Image ... OK
    if (ret < 0) {//上个函数调用失败才会进入这个路径
        if (ret == BOOTM_ERR_RESET)
            do_reset (cmdtp, flag, argc, argv);
        if (ret == BOOTM_ERR_OVERLAP) {
            if (images.legacy_hdr_valid) {
                if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
                    puts ("WARNING: legacy format multi component "
                        "image overwritten/n");
            } else {
                puts ("ERROR: new format image overwritten - "
                    "must RESET the board to recover/n");
                show_boot_progress (-113);
                do_reset (cmdtp, flag, argc, argv);
            }
        }
        if (ret == BOOTM_ERR_UNIMPLEMENTED) {
            if (iflag)
                enable_interrupts();
            show_boot_progress (-7);
            return 1;
        }
    }
    lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));//由于没有定义CONFIG_LMB，这个函数调用被定义为一个空的宏。
    if (images.os.type == IH_TYPE_STANDALONE) {//处理单独的程序镜像。显然引导内核时不会进入这个路径。
        if (iflag)
            enable_interrupts();
        /* This may return when 'autostart' is 'no' */
        bootm_start_standalone(iflag, argc, argv);
        return 0;
    }
    show_boot_progress (8);
    boot_fn = boot_os[images.os.os];//根据操作系统的类型获取引导操作系统的函数， boot_os代码如下。
    if (boot_fn == NULL) {
        if (iflag)
            enable_interrupts();
        printf ("ERROR: booting os '%s' (%d) is not supported/n",
            genimg_get_os_name(images.os.os), images.os.os);
        show_boot_progress (-8);
        return 1;
    }
    arch_preboot_os();//禁用中断，重设中断向量
    boot_fn(0, argc, argv, &images);//调用do_bootm_linux，分析在下面。
    show_boot_progress (-9);
#ifdef DEBUG
    puts ("/n## Control returned to monitor - resetting.../n");
#endif
    do_reset (cmdtp, flag, argc, argv);
    return 1;
}

2。boot_os

3。do_bootm_linux
之前所做的引导工作都是与操作系统无关的，接下来都是针对linux 的。
可以看到，参数flag传过来的是0。

arch/arm/lib/bootm.c
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
{
    bd_t    *bd = gd->bd;
    char    *s;
    int    machid = bd->bi_arch_number;
    void    (*theKernel)(int zero, int arch, uint params);
#ifdef CONFIG_CMDLINE_TAG//如果定义了这个宏，将会把bootargs传给内核。
    char *commandline = getenv ("bootargs");//获取bootargs环境变量。
#endif
    if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
        return 1;
    theKernel = (void (*)(int, int, uint))images->ep;//镜像的入口地址处也就是需要执行的函数入口
    s = getenv ("machid");
    if (s) {
        machid = simple_strtoul (s, NULL, 16);
        printf ("Using machid 0x%x from environment/n", machid);
    }
    show_boot_progress (15);
    debug ("## Transferring control to Linux (at address %08lx) .../n",
           (ulong) theKernel);
//下面将会初始化传给内核的标签（tag），这些标签里包含了必要的环境变量和参数。
#if defined (CONFIG_SETUP_MEMORY_TAGS) || /
    defined (CONFIG_CMDLINE_TAG) || /
    defined (CONFIG_INITRD_TAG) || /
    defined (CONFIG_SERIAL_TAG) || /
    defined (CONFIG_REVISION_TAG)
    setup_start_tag (bd);
#ifdef CONFIG_SETUP_MEMORY_TAGS
    setup_memory_tags (bd);//内存有关的定义
#endif
#ifdef CONFIG_CMDLINE_TAG
    setup_commandline_tag (bd, commandline);//将bootargs传给tag
#endif
#ifdef CONFIG_INITRD_TAG
    if (images->rd_start && images->rd_end)//没有ramdisk所以不会执行这个路径
        setup_initrd_tag (bd, images->rd_start, images->rd_end);
#endif
    setup_end_tag (bd);
#endif
    /* we assume that the kernel is in place */
    printf ("/nStarting kernel .../n/n");//引导内核之前最后一次打印信息。
    cleanup_before_linux ();//禁用中断和cache.
    theKernel (0, machid, bd->bi_boot_params);//跳到内核中执行。<<<<全剧终>>>>
    /* does not return */
    return 1;
}

arch/arm/include/asm
/* The list must start with an ATAG_CORE node */
#define ATAG_CORE    0x54410001
struct tag_core {
    u32 flags;        /* bit 0 = read-only */
    u32 pagesize;
    u32 rootdev;
};
/* command line: /0 terminated string */
#define ATAG_CMDLINE    0x54410009
struct tag_cmdline {//bootargs保存在它的后面
    char    cmdline[1];    /* this is the minimum size */
};
/* describes where the compressed ramdisk image lives (virtual address) */
/*
 * this one accidentally used virtual addresses - as such,
 * its depreciated.
 */
#define ATAG_INITRD    0x54410005
/* describes where the compressed ramdisk image lives (physical address) */
#define ATAG_INITRD2    0x54420005
struct tag_initrd {//描述ramdisk的分布
    u32 start;    /* physical start address */
    u32 size;    /* size of compressed ramdisk image in bytes */
};
/* it is allowed to have multiple ATAG_MEM nodes */
#define ATAG_MEM    0x54410002
struct tag_mem32 {
    u32    size;
    u32    start;    /* physical start address */
};
struct tag_header {
    u32 size;
    u32 tag;
};
struct tag {
    struct tag_header hdr;
    union {
        struct tag_core        core;
        struct tag_mem32    mem;
        struct tag_videotext    videotext;
        struct tag_ramdisk    ramdisk;
        struct tag_initrd        initrd;
        struct tag_serialnr    serialnr;
        struct tag_revision    revision;
        struct tag_videolfb    videolfb;
        struct tag_cmdline    cmdline;
        /*
         * Acorn specific
         */
        struct tag_acorn    acorn;
        /*
         * DC21285 specific
         */
        struct tag_memclk    memclk;
    } u;
};

arch/arm/include/asm/setup.h
#define tag_next(t)    ((struct tag *)((u32 *)(t) + (t)->hdr.size))//跳到下一个tag地址处
arch/arm/lib/bootm.c
static void setup_start_tag (bd_t *bd)
{
    params = (struct tag *) bd->bi_boot_params;  //CFG_ENV_ADDR(0x80000100)设置环境变量的头地址。
    params->hdr.tag = ATAG_CORE;            //第一个tag默认为 tag_core。ATAG_CORE 是默认的开始类型。
    params->hdr.size = tag_size (tag_core);
    params->u.core.flags = 0;
    params->u.core.pagesize = 0;
    params->u.core.rootdev = 0;
    params = tag_next (params);        //跳到下一个tag地址处
}
#ifdef CONFIG_SETUP_MEMORY_TAGS
static void setup_memory_tags (bd_t *bd)//设置内存分布的tag
{
    int i;
    for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {//如果有多个内存芯片，则会循环多次。对3250来说，只有一片。
        params->hdr.tag = ATAG_MEM;
        params->hdr.size = tag_size (tag_mem32);
        params->u.mem.start = bd->bi_dram[i].start;//内存块的开始地址。PHYS_SDRAM_1;在smartarm3250.h中,起始地址(0x80000000)
        params->u.mem.size = bd->bi_dram[i].size;//内存块的大小
        params = tag_next (params);//跳到下一个tag地址处
    }
}
#endif /* CONFIG_SETUP_MEMORY_TAGS */
static void setup_commandline_tag (bd_t *bd, char *commandline)
{
    char *p;
    if (!commandline)
        return;
    /* eat leading white space */
    for (p = commandline; *p == ' '; p++);//跳过开头的空格
    /* skip non-existent command lines so the kernel will still
     * use its default command line.
     */
    if (*p == '/0')
        return;
    params->hdr.tag = ATAG_CMDLINE;
    params->hdr.size =
        (sizeof (struct tag_header) + strlen (p) + 1 + 4) >> 2;
    strcpy (params->u.cmdline.cmdline, p);//将bootargs复制到cmdline后面。
    params = tag_next (params);//跳到下一个tag地址处
}
#ifdef CONFIG_INITRD_TAG
static void setup_initrd_tag (bd_t *bd, ulong initrd_start, ulong initrd_end)
{
    /* an ATAG_INITRD node tells the kernel where the compressed
     * ramdisk can be found. ATAG_RDIMG is a better name, actually.
     */
    params->hdr.tag = ATAG_INITRD2;
    params->hdr.size = tag_size (tag_initrd);
    params->u.initrd.start = initrd_start;
    params->u.initrd.size = initrd_end - initrd_start;
    params = tag_next (params);
}
#endif /* CONFIG_INITRD_TAG */
static void setup_end_tag (bd_t *bd)
{
    params->hdr.tag = ATAG_NONE;//最后一个tag是一个空类型，标志这tag的结束。
    params->hdr.size = 0;
}