1.先在不接入android设备的情况下,使用lsusb 查看usb设备,然后在接入android设备的情况下,使用lsusb 查看usb设备,如下红色部分对应的就是android设备
(1)不接入android设备的情况
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 003 Device 003: ID 413c:2113 Dell Computer Corp.
Bus 003 Device 002: ID 24ae:2002
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(2)接入android设备的情况
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 003 Device 008: ID 1f3a:1007 Onda (unverified)
Bus 003 Device 003: ID 413c:2113 Dell Computer Corp.
Bus 003 Device 002: ID 24ae:2002
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
2.创建adb_usb.ini文件,写入id:0x1f3a
在home下寻找.android目录,在此目录下新建一个文件adb_usb.ini.
echo0x1f3a> ~/.android/adb_usb.ini
3.添加权限
sudo gedit /etc/udev/rules.d/51-android.rules
加入以下内容,注意红色部分对应的就是lsusb得到的id
SUBSYSTEM=="usb", ATTRS{idVendor}=="1f3a", ATTRS{idProduct}=="1007",MODE="0666"
4.重启USB服务
$sudo chmod a+rx /etc/udev/rules.d/51-android.rules
$sudo service udev restart
5.重启adb服务,adb devices有设备说明adb安装成功
$adb kill-server
$sudo adb start-server
$adb devices
List of devices attached86449a88572700000000 device