Error[e16]: Segment CSTACK (size: 0x50 align: 0x1) is too long for segment

最新推荐文章于 2024-10-18 01:05:12 发布
原创 最新推荐文章于 2024-10-18 01:05:12 发布 · 3.3k 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。

本文讨论了IAR Systems编译环境中遇到的错误e16：CSTACK段过长的问题。该错误发生在处理特定段放置命令时，并详细记录了在分配CSTACK时内存范围的情况，包括所需额外字节数及保留范围。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >


Copyright 1987-2008 IAR Systems. All rights reserved.
Error[e16]: Segment CSTACK (size: 0x50 align: 0x1) is too long for segment

definition. At least 0x3e more bytes needed. The pro××em occurred while
processing the segment placement command "-Z(DATA)CSTACK+_STACK_SIZE#", where at

the moment of placement the ××aila××e memory ranges
were "CODE:3ee-3ff"
Reserved ranges relevant to this placement:
200-39f DATA16_I
3a0-3ed DATA16_Z
3ee-3ff CSTACK
xizmi
关注
TI_CC2541环境搭建[IAR编译错误Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long]
挖到尽头
02-02 243
IAR编译错误Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment defin
IAR编写项目工程时出现Error[e16]问题
Silent_Lin的博客
03-19 2091
问题描述： 错误描述Error[e16]: Segment CSTACK (size: 0x50 align: 0x1) is too long for segment definition. At least 0x2b more bytes needed. The problem occurred while processing the segment placement command “-Z(DATA)CSTACK+_STACK_SIZE#”, where at the moment of plac
SensorTag编译错误Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition.
热门推荐
zhangjs0322的专栏
06-24 1万+
IAR 8051 8.302，编译TI的BLE-CC254x-1.4.0的SensorTag工程，出现如下错误：
IAR编译cstack错误及解决办法
一颗偏执的心
05-25 5439
IAR编译cstack错误： Error[e16]: Segment CSTACK (size: 0x20 align: 0x1) is too long for segment definition. At least 0x6 more bytes needed. The problem occurred while processing the segment placement com
IAR编译常见错误。
大磊大的专栏
08-17 6083
首先，申明这下面是转的。 Error[Cp001]: Copy protection check, No valid license found for this prod t [20] 原因：安装的时候没有把注册机的0x.....字串的小写字母改为大写字母。 Warning[Pe001]: last line of file ends without a newline F:\em
IAR软件应用中的错误提示
10-23 1万+
1 Q： Error[e16]: Segment XDATA_Z (size: 0x19a1 align: 0) is too long for segment definition. At least 0xe4c more bytes needed. The problem occurred while processing the segment placement command "
Error[e16]: Segment "LEARAM" (size: 0x25a0 align: 9) is too long for segment definition. At least 0x6d8 more bytes needed. Reserved ranges relevant to this placement:
03-20
在IAR开发环境中遇到`Error e16: LEARAM segment too long`错误，通常是由于代码或数据量超出芯片内存段容量限制导致。以下是分步解决方法： 1. **分析内存分配** - 使用IAR的`Linker Map File`查看LEARAM段占用...
IAR报错Error[e16]: Segment XDATA_Z (size: 0xc14 align: 0) is too long for segment definition. At least 0x15 more bytes needed. The problem occurred while processing the segment placement
最新发布
08-12
- [^1]: 错误描述Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long... 解决方案是减少全局变量或调整堆栈大小。 - [^2]: 类似错误，代码比flash大，导致Error[e16]。 - [^3]: 错误描述Segment CSTACK ...
Building configuration: 01 - Debug Updating build tree... Linking Error[e16]: Segment IDATA_Z (size: 0x81 align: 0) is too long for segment definition. At least 0x55 more bytes needed. The problem occurred while processing the segment placement command "-Z(IDATA)IDATA_I,IDATA_Z,IDATA_N=08-_IDATA0_END", where at the moment of placement the available memory ranges were "IDATA:d4-ff" Reserved ranges relevant to this placement: IDATA:8-f VREG IDATA:10-1f IDATA_I IDATA:21-ff IDATA_I BIT:0-7 BREG BIT:88-97 SFR_AN BIT:a8-af SFR_AN BIT:b8-c7 SFR_AN BIT:e8-ef SFR_AN Error while running Linker Total number of errors: 1 Total number of warnings: 0
03-25
</think>### 链接器错误Error[e16]: Segment IDATA_Z 大小不足的解决方案 该错误表明链接器尝试将段`IDATA_Z`分配到指定内存区域时，发现其所需空间超过可用范围。以下是分步解决方法： #### 1. **分析内存分配...
关于Error[e16] Segment INTVEC 的解决方法
07-25
关于Error[e16] Segment INTVEC 的解决方法 软件：IAR for msp430
[转载]【IAR Error】IAR MSP430编译报错：error
xiaotaohong66的专栏
08-02 6790
无编号警告类型： 1、Sat Jun 23, 2012 17:41:05: The stack pointer for stack 'Stack' (currently Memory:0xF5336) is 原因：http://blog.sina.com.cn/s/blog_4c0cb1c0010153l9.html      IAR相关设置：Tools->Option->St
Error[e16]: Segment DATA16_I (size: 0x1001c align: 0x1) is too long for segment
u010568345的专栏
09-08 4947
http://blog.sina.com.cn/s/blog_a85e142101010ufd.html     由于我在程序里定义了一个很大的数组，有8192个元素，每个元素都是32位，仅该数组大小就有32768（32K）字节，而我使用的MSP430F5438A的RAM只有16KB大小。编译报告显示如下：     676 bytes of CODE memory  
【工具】Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition.
Catullus的博客
05-09 3885
参考链接： 厉害了，我是连接，快点我问题： IAR For 8051 9.20.2点击低版本的IAR for 8051 7.40的Project时候，会出现以下问题。现象： Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least 0x7 more bytes ne
Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition.
qq_45174314的博客
04-26 600
完整的：Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least 0xe more bytes needed. The problem occurred while processing the segment placement command "-Z(IDATA)ISTACK+_IDATA_STACK_SIZE#08-_IDATA_END", where at the mo
Error[e16]: Segment TINY_I (size: 0x5fe align: 0) is too long for segment definition. At least 0x55e
qq_45484846的博客
10-18 159
其目的是将OledFontTable存储至Flash中，在ARM中可以使用const修饰来实现此功能，但是AVR需要用__flash来修饰。
Error[e16]: Segment DATA16_I (size: 0xa80 align: 0x1) is too long for segment definition.
xizmi的专栏
01-13 4636
 Error[e16]: Segment DATA16_I (size: 0xa80 align: 0x1) is too long for segment definition. IAR MSP430编译报错： Error[e16]: Segment DATA16_I (size: 0xa80 align: 0x1) is too long for segment defini
IAR编译错误Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least...
dingmandiao1700的博客
08-08 1820
问题：个人使用的是IARV9.10编译CC2541的工程，没有做任何修改，直接编译出现如下错误 Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition. At least 0x8 more bytes needed. The problem occurred while pr...
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值