Lighttpd on FreeBSD

最新推荐文章于 2021-08-05 16:07:02 发布

xiliuhu

最新推荐文章于 2021-08-05 16:07:02 发布

阅读量629

点赞数

分类专栏： FreeBSD 文章标签： freebsd lighttpd tree redirect output download

FreeBSD 专栏收录该内容

3 篇文章

订阅专栏

本文档提供了一种在FreeBSD系统中安装lighttpd Web服务器及PHP5的方法。首先确保安装了最新的端口树，然后通过portsnap工具进行更新。接着详细介绍了如何配置并安装PHP5与lighttpd，最后提到了安装后的配置步骤。

http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD

(If you don't want PHP skip step 2)

Step 1. Verify ports installation¶

You should have a recent ports tree installed on your system. If you have not updated your ports tree recently, please do so before continuing. If you do not have a ports tree installed, you can use the portsnap utility to install or update it. I find this to be an extreemly quick way (under 15 minutes on a decent broadband connection) to install the full ports tree. And you don't even have to worry about cvsup or setting up configuration files.

Download most recent ports snapshot:

$ sudo portsnap fetch
   or
# portsnap fetch

Example output:

Looking up portsnap.FreeBSD.org mirrors... 2 mirrors found.
Fetching public key from portsnap1.FreeBSD.org... done.
Fetching snapshot tag from portsnap1.FreeBSD.org... done.
Fetching snapshot metadata... done.
Fetching snapshot generated at Fri Mar 16 19:19:25 CDT 2007:
dbc38dfcfd2f738fc6ffa7c9d6b1b583982a39c19db371 32% of   46 MB  212 kBps 02m33s
 (... download continues ...)
dbc38dfcfd2f738fc6ffa7c9d6b1b583982a39c19db371100% of   46 MB  202 kBps 00m00s
Extracting snapshot... done.
Verifying snapshot integrity... done.
Fetching snapshot tag from portsnap1.FreeBSD.org... done.
Fetching snapshot metadata... done.
Updating from Fri Mar 16 19:19:25 CDT 2007 to Sat Mar 17 04:02:50 CDT 2007.
Fetching 3 metadata patches.. done.
Applying metadata patches... done.
Fetching 0 metadata files... done.
Fetching 19 patches.....10.... done.
Applying patches... done.
Fetching 4 new ports or files... done.*

Extract snapshot:

 $ sudo portsnap extract
   or
 # portsnap extract

Example output:

 (... a lot of directories ...)
/usr/ports/x11/xsnow/
/usr/ports/x11/xstarroll/
/usr/ports/x11/xstroke/
/usr/ports/x11/xtacy/
/usr/ports/x11/xtattr/
/usr/ports/x11/xterm/
/usr/ports/x11/xtermcontrol/
/usr/ports/x11/xtermset/
/usr/ports/x11/xtestpicture/
/usr/ports/x11/xtoolwait/
/usr/ports/x11/xtrlock/
/usr/ports/x11/xtset/
/usr/ports/x11/xvattr/
/usr/ports/x11/xvkbd/
/usr/ports/x11/xwatchwin/
/usr/ports/x11/xwit/
/usr/ports/x11/xxkb/
/usr/ports/x11/xzoom/
/usr/ports/x11/yakuake/
/usr/ports/x11/yalias/
/usr/ports/x11/yelp/
/usr/ports/x11/zenity/
Building new INDEX files... done.

Step 2. Install PHP 5¶

cd /usr/ports/lang/php5

$ sudo make config
   or
# make config

Verify that CGI and FastCGI are checked (default), and you want to enable REDIRECT as well. Choose ok. (Perhaps discard-path support as well?)

Now to compile and install it:

$ sudo make install clean
   or
# make install clean

Step 3. Install lighttpd¶

cd /usr/ports/www/lighttpd

$ sudo make config
   or
# make config

Verify whatever options you want for your installation of lighttpd.

Now to compile and install it:

$ sudo make install clean
   or
# make install clean

Step 4. Post install configuration¶

Refer to TutorialLighttpdAndPHP for more fun.