FIT1047 Introduction to computer systems networks and security - S2 2024 2R

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载

Java Python FIT1047 Introduction to computer systems, networks and security - S2 2024

Assignment 2 – Processes and MARIE Programming

Purpose

Processes and programs are what makes computers do what we want them to do. In the first part of this assignment, students will investigate the processes   running on their computers. The second part is about programming in MARIE   assembly language. This will allow students to demonstrate their

comprehension of the fundamental way a processor works.

The assignment relates to Unit Learning Outcomes 2, 3 and 4.

Your task

Part 1a: Submit your reflections. See details below.

Part 1b: Write a short report describing the processes running on your computer.

Part 1c: Disassemble and add comments to a MARIE program.

Part 1d: Write a MARIE program that can display bitmap numbers.

Part 2: In-class In-person Interview (week 8 applied session)

Value

25% of your total marks for the unit

The assignment is marked out of 60 marks.

Word Limit

See individual instructions

Due Date

Part 1a-1d: 11:55 PM Friday 30 August 2024

Part 2: Interview conducted during Week 8 your official allocated Applied Session

Submission

●   Via Moodle Assignment Submission.

●    DRAFT submission is not assessed. Re-check your submission in Moodle.

●    Turnitin will be used for similarity checking of all submissions. Ignore Turnitin warning or error messages for .mas files or other

non-document files.

●    DRAFT upload confirmation email from Turnitin is not a submission. You must click the submit button to accept terms and conditions in Moodle.

●    This is an individual assignment (group work is not permitted).

●    In this assessment, you must not use generative artificial intelligence (AI) to generate any materials or content in relation to the assessment task.

●    Turnitin and MOSS will be used for similarity checking of all submissions. This is an individual assignment (group work is not permitted).

●    You will need to explain and extend your code in an interview. (Part 2)

INSTRUCTIONS

This assignment has five parts. Make sure you read the instructions carefully.

For Part 1a, collect your reflections from each week’s Ed Lesson and create a single PDF document. You can simply copy/paste your reflections, but please add headings for each week. Submit the PDF through the Moodle Assignment activity.

For Part 1b-1d, you need to submit files through the Moodle Assignment activity.

Files are required via Moodle Assignment Submission:

● Part 1a: one pdf file (containing reflection from Week 4, 5 and 6)

● Part 1b: one pdf file (containing answer)

● Part 1c: one .mas file for Part 1c

● Part 1d: one .mas file for Part 1d

You may see the following error message from Turnitin. You can ignore this error message!

Part 2 is an in-class interview during your allocated Applied Class in Week 8. Instructions will be available in Moodle and communicated via an announcement post.

Part 1a: Reflection (Hurdle - you MUST submit it in order to pass this assignment!)

Complete your reflection activities in Week 4 to Week 6 Ed Lesson and copy/paste them into a pdf file. Each week the reflection must have at least 100 words (relevant and meaningful to the specific week).

Failure to submit all relevant  week’s reflections (missing all submissions  or incomplete submissions) will result in your assignment 1 having a maximum mark of

49% only. For example, if the overall combined mark is 61/100, it will be scaled to 49/100. If the overall combined mark is 44/100 then it will remain as 44/100.

You may use this template:

https://docs.google.com/document/d/18UIEJQeyarYW1pl8oDEaf--ubCdJ5LDf-9_jSLbGxrE/edi t?usp=sharing  to write down your reflection.

Part 1b: Process (10 marks total)

For this task, write a brief report about processes that you observe running on your computer. You can use one of the following tools (depending on your operating system): On Windows, use the Task Manager

On macOS, use the Activity Monitor

On Linux, use a command line tool like htop, top, or the ps command Answer the following questions:

1. Briefly describe the columns displayed by the tool you use that relate to a) memory usage and b) CPU usage of a process. What can you say about the overall memory usage of all processes, compared to the RAM installed in your computer? Include graphs or charts for the comparison. (5 marks)

2. Pick a process you perhaps don’t know much about, or which you did not expect to find running on your computer. Try to find out and describe briefly what it does. (5  marks)

Include a screenshot of your processes in the report along with CPU/memory usage graphs and/or charts. The screenshot should show between 5 and 10 processes. The word limit for this part (both questions together) is 500 words (about 1 page, not including images and tables).

Submit your report for this part (Part 1b) as a PDF file (independent of the other parts) in Moodle.

Part 1c: MARIE Disassembly (20 marks total)

Follow the link on Moodle to access your personalised MARIE memory screenshot for this task.

Important: Your memory screenshot is different from the one other students are working on. Only download the file while you are correctly logged into Moodle with your own student account.

Task 1: Disassemble the memory (10 marks)

Based on the memory contents, recreate the MARIE program that corresponds to your personalised memory screenshot. This is called “disassembling” the machine code, since it is the opposite operation of “assembling” the MARIE code into the binary memory contents.

For each memory cell, decode the instruction and (if applicable) the address that the memory cell is encoding. You can make the following assumptions:

- There is exactly one Halt instruction in the code

- Every memory location after the Halt instruction contains data

- Any memory location that contains the value 0 is data (even before the Halt instruction)

Here is an example of a memory screenshot and the corresponding decoded MARIE program:

Disassembled program:

Input

Add 005 Output

Jump 000 Halt

DEC 10

Note: You need to decode the actual instructions. E.g. for the first memory location, HEX 5000 would not be a valid answer. The contents of all memory that follo FIT1047 Introduction to computer systems, networks and security - S2 2024 Assignment 2R ws the Halt instruction is considered to be data. Therefore, DEC 10 is the correct decoding of location 5 (instead of JnS 00A), and HEX 00A would also be correct. You don’t need to list all the locations containing zeros starting from address 006 (these will be filled with zeros by the assembler anyway).

Tip: You can verify that your disassembled code is correct by entering it into the MARIE simulator, assembling it and comparing the memory contents to the screenshot you started from.

Task 2: Add labels (5 marks)

Now update the program you decoded in Task 2.1. Removing all hard-coded memory addresses by adding labels to replace all memory locations that are used as addresses in the program instructions. Labels should have meaningful names in the context of what the program does (i.e., not just A, B, C). For the example above, this could result in the following program:

MainLoop, Input

Add Ten

Output

Jump MainLoop

Halt

Ten, DEC 10

Task 3: Add comments (5 marks)

Comment the code based on your understanding of what it does. Comments should describe the function of the different parts. E.g., if you identify a subroutine in the code, add a comment at the start of the subroutine that describes what it does, and whether it takes any arguments.

For this part (Part 1c), you need to submit one .mas file containing your final code. Do not submit one .mas file per each subtask!

Part 1d: MARIE Programming (22 marks total)

In this task you will develop a MARIE application that draws numbers on the screen. We will break it down into steps for you.

Note: This part is for students who want to achieve a Distinction or High Distinction mark in this assignment. In order to receive any  marks for this  part, you must reach at least a Credit grade for Parts 1, 2 and 3.

Each task requires you to write code and documentation. On Moodle, you will find a template for the code (or click this to download). Your submission must be based on this template, i.e., you must add implementations of your own subroutines into the template. The template already contains the main program that calls the subroutines.

Your code must contain readable comments and meaningful labels for your tutor / marker to understand the logic flow of your program (e.g. the purpose of a subroutine, jump / skip cond statement etc.).

In-class  interview (Part 2): You will  be required to join an interview to demonstrate your code to your tutor during your applied session in week 8 (after the submission deadline). Failure to demonstrate will lead to zero marks being awarded for the entire Part 1d, regardless  of your submission in Moodle. In addition, during the interview (Part 2), you will also need to answer further questions about your submitted code (see below for details).

Code similarity: We use tools such as MOSS and Turnitin to check for collaboration and copying between students. If you copy parts of your code from other students, or you let them copy parts of your code, this will result in a report to the Academic Integrity team. As a result, you may receive a penalty such as 0 marks for the entire assignment, 0 marks for the whole unit, or in severe cases (such as contract cheating), suspension or expulsion from Monash University.

Rubric: The marking rubric on Moodle provides details for the marking. A correctly working MARIE program that covers all tasks and is well documented will receive full marks.

Missing/incomplete documentation will result in a loss of up to ¼ of the task’s marks.

Introduction: Bit-mapped displays

So far, the only output capability we have seen in the MARIE system is using the Output instruction, which will print a single 16-bit value. Many computers of course are capable of displaying arbitrary graphics, often in high resolution and great colour depth. In the lectures on input/output systems, we have seen that one way to implement this is to map a certain location of the memory to an output device. I.e., writing to that memory location  (using e.g. a Store instruction) causes the output to happen.

In the simplest form. of graphics hardware, we can dedicate part of the RAM to be graphics memory. Each memory cell corresponds to a pixel on screen, and the value in the memory cell encodes the colour of the pixel. That way, we can create arbitrary graphics by simply writing values into the memory.

The MARIE simulator has a feature called Display, which you access from the list of tabs that also shows the output log, RTL log etc:

The display shows the memory from address F00 to address FFF as a 16x16 pixel screen. The value in the memory locations represents the colour of the pixels. We will only use the colours black, represented as 0, and white, represented as FFFF. When you start the MARIE simulator and assemble your code, the memory starting from location F00 is (usually) filled with zeroes, which means that the display is black. Let’s now change the contents of the memory using some Store instructions:

Load White

Store 0F80

Store 0F81

Store 0F82

Store 0F83

Halt

White, HEX FFFF

After running this program, the display will look like this:

 

You can see that the first four pixels in the 9th row have now turned white.

Task 1 Clearing the display (4 points)

Write a subroutine SubClearDisplay that turns all pixels in the graphics memory white.

Remember that the graphics memory ranges from address 0F00 to address 0FFF, and that white pixels are represented by the value FFFF. Document your subroutine with comments.

Task 2 Painting a number (10 points)

The template for this task contains data for bitmaps of the digits 0-9, stored at the label Font. Each digit consists of 3x5 pixels of data. The first 3 words are the first row of pixels, the next  3 words are the second row, and so on. For example, the digit 2 is represented as 0 0 FFFF

FFFF FFFF 0

FFFF 0 FFFF

0 FFFF FFFF

0 0 0

You can see the pattern here, the zeros “paint” the shape of the character 2 in black, with the background in white (FFFF).

Your task is to write a subroutine called SubPaintDigit that paints a digit into the graphics memory. The start of the subroutine needs to look like this:

PaintDigitCharacter, HEX 0

PaintDigitDisplay, HEX 0

SubPaintDigit, HEX 0

In the PaintDigitCharacter argument, we pass the address of the first pixel data in the font for the digit we want to paint. In the PaintDigitDisplay argument, we pass the address of the top-left corner where we want to start painting in the graphics memory. For example, to paint  the digit 0, starting from the second pixel in the second row, we could use the following code:

Load FontAddr

Store PaintDigitCharacter

Load Display22

Store PaintDigitDisplay

JnS SubPaintDigit

Halt

Display22, HEX 0F11

Note that the address 0F11 (label Display22) lies exactly 17 words after the start of the graphics memory. This means we’re skipping the first row (16 words) and the first pixel in the second row (1 word).

Here we simply use FontAddr to refer to the first character (for the digit 0). For the other characters, we would have to add a corresponding offset into the font memory.

In order to paint a digit in your subroutine, you can follow this “recipe” :

- Your subroutine should contain two nested loops.

- Each digit contains 15 pixels, so you need to loop through those 15 pixels, load each

one from the font definition and store it into the graphics memory. This is the outer loop of your subroutine.

- After each set of 3 pixels, you need to start in the next row of the graphics display. This means that if you were currently writing into graphics memory at address X, you now need to continue writing at address X plus the width of the display minus the width of a character. This is the inner loop of your subroutine.

- Once you have “copied” all 15 pixels from the font definition into the graphics memory, you can exit the subroutine.

Your subroutine needs to contain sufficient comments to enable someone else (like the person marking your assignment) to understand the purpose of each line of your code.

Task 3 Counting down (8 points)

Your final task is to implement a subroutine SubCountDown that clears the screen and then counts down from 9 to 0, drawing those digits on the bit-mapped display using the subroutines developed in the previous tasks.

In order to get full marks, your code needs to use a loop that decrements a counter and calls SubPaintDigit based on the value of the counter, rather than a sequence of instructions that calls SubPaintDigit with each digit’s address. Use additional subroutines to structure your code nicely.

You will notice that it would be nice for the countdown to wait for a fraction of a second between digits. Think of a way you can achieve this, so that the countdown takes (more or less) exactly 10 seconds on your computer to execute. Document how you achieved this in the code comments.

A sample output video for this part (part 1d) is provided for your reference:

https://drive.google.com/file/d/1NQPMNCuLoVxf7dD8omFqacS9SRCcefQC/view?usp=driv e_link

For this part (Part 1d), you need to submit one .mas file, based on the template, containing the code for all subroutines. Do not submit one .mas file per each subtask!

Part 2: In-class interview (8 marks total)

You need to demonstrate the code you submitted for Part 1d Task 1–3 to your tutor in an in-class in-person interview (to be conducted during your official allocated Applied session in Week 8) after the submission deadline. Failure to explain how your code works will result in 0 points for the individual tasks that you cannot demonstrate.

In addition, you will be asked to modify the code you submitted in certain ways and explain how the MARIE concepts work that you were required to use for the individual tasks. These additional questions add up to 8 points for this part (Task 4).

Failure to attend the interview will result in 0 points for the entire Part 1d and Part 2, regardless of your submission in Moodle         

印尼稻米收成与粮食安全数据集2026年 本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。 立即下载

相关推荐

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

FIT1047 java /Python

PurposeYour taskValueWord LimitDue DateSubmissionFeedbackInputAdd 005OutputJump 000HaltDEC 10Add TenOutputHalt。

wolfminy的博客 817

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

FIT1047 Introduction to computer systems

PurposeYour taskValueWord LimitDue DateSubmissionFeedbackInputAdd 005OutputJump 000HaltDEC 10Add TenOutputHalt。

vx_codinghelp的博客 3361

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 662

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

上一篇: MN7032SR Marketing in the Digital World Spring 2024 R
下一篇: Assessment 1: Job interviewC/C++
wx_codinghelp
博客等级 码龄2年 691粉丝 84原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值