MATE40005 Use of Rheology to Guide Polymer ProcessingMatlab

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载

Java Python Safety in the Rheology for Processing experiment

If you do not take care during this experiment you could be injured (mainly to hands or head). Therefore, do not start the experiment before a demonstrator has introduced the class.

1. Lab coats and safety goggles must be worn at all times.

2. The Rheometer is an extremely expensive and delicate machine, and it has to be used accordingly with all precaution and care. Make sure you have read and understood how to use it, or ask a GTA to demonstrate it for you. The user manual is located on the machine.

3. In the event of the rheometer not operating correctly, call the GTA or a technician and wait for their help. DO NOT attempt to fix it on your own.

4. Safety spectacles, lab coats and gloves MUST be worn when operating the machine and while working with the polymers provided. Once you have mixed the fluids to produce the “slime”, it is allowed to remove your gloves to work with the slime. However, if you do so, please ensure you wash your hands before touching anything else.

5. Please make sure you operate in the safety of others as the lab is a shared space and you clean everything after your experiment has been completed.

If you have read and understood all safety instructions, then please sign Risk identification and declaration sheet and hand it to your demonstrator before start of the lab.

Important note about lab etiquette:

If a group's work area is not left in the same state (or neater) as it was found, they will be penalised 10% of their total lab mark. If the general lab (floor, labstools, basins, etc) are not left in the state in which they

are found in the morning (or neater), the entire cohort present in the lab that day will be docked 10%. These mark penalties are additive.

Use of Rheology to Guide Polymer Processing

Aim

The aim of this experiment is to learn the use of the rheometer to perform studies on flow and oscillatory properties of various materials. This would strengthen the understanding that these properties play a fundamental  part in  processing  materials and  have often to  be  considered  before  production.  In this laboratory you will explore a range of materials to understand their rheological properties. You will then setup a matrix of samples with known composition to establish a set of viscoelastic properties. In the final part of the lab, you will be asked to use this information to predict the conditions needed to prepare a cross-linked polymeric material within given processing properties and windows and analyse the outcome of your experiment.

Intended learning outcomes

At the end of this experiment students will be able to:

•    Understand the key working principles of the Rheometer and the different types of tests.

•    Know how to measure the viscosity and modulus of very different materials, understanding how crucial the role of theology is in daily processing applications.

•    Recognise differences in materials by their rheological data, differentiating  between  viscous, viscoelastic andelastomeric and differentiate between Newtonian and non-Newtonian behaviour.

•    Synthesise “silly putty” with different concentrations and relate quantities to its cross-linking ratio.

•    Use pre-set data to fabricate a material with the required processing andrheological properties.

•    Use a laboratory book appropriately to record prelab work, experimental procedure and results.

Lab bookkeeping

You are training to be material scientist and engineer and therefore accurate record keeping is a critical skill. It is important that you use your lab book for prelab work, to record your procedure, key findings or observations,  and  make  notes  throughout  your  experiments.  These  may  include  calculations,  written comments or notes, sketches, or tabulated results. The quality of your (individual) record keeping will be monitored and evaluated during the experiment.

Safety and Good Laboratory Practices

Being a good materials scientist also involves working following the safety restrictions and learning to share spaces with other peers and members of staff respectfully. This involves learning to setup a lab space and cleaning/tidying after yourself together with your group. At the end of the experiment you will be expected to have cleared up your working space and the equipment in use. Any pieces of fractured samples will have to be disposed of according to the initial directions of the GTAs and instructions in the risk assessment associated with the experiment. Points will betaken off your final assignment if these practices as described are not followed.

1. Introduction:

Measuring materials properties is not always as straightforward as measurements of tensile or bending strength. Some materials possess way more complex mechanical behaviours that can only be described through complex analyses of their intrinsic properties.   For example, the description of the behaviour of vulcanised  rubber  needs  to  take  into  account  the  incredible  intrinsic  restorative  properties  that  this material uses due to its complex chemical structure. In its use in tyres, the material needs to be able to deform, but also to restore to its original shape without external forces being applied to it. At the same time, it cannot deform spontaneously, but needs to be rigid enough to hold its shape as prepared. Two questions  come  to  mind  immediately:  first,  what  allows  it  to  hold  the  shape  while  still  supporting distortion? Second, what causes it to restore its shape once deformed?

The answers to these questions are the viscoelastic properties of the material. Choosing these correctly gives an ideal behaviour for the selected application. Choosing these incorrectly will lead to a material that is either too stiff and suffers fracture, or too fluid and hence cannot hold its own shape. In this laboratory exercise, you will explore the use of rheology to assess the viscoelastic properties of a polymeric material, and hence learn to use these properties to form. a material with desired behaviour.

Cross-Linking of Polymers

Polymeric materials are useful in a variety of applications. The various processing methods applied to the same  precursor  materials  will yield  dramatically  different  resulting  materials  with  a  diverse  range  of applications. Common examples of cross-linking are observed in rubber tyres, tightly curled hair, contact adhesive or semi-solid gel materials. Each of these examples exhibits a different type of cross-linking, from rigid sulphur bonding in the case of tyres, to sulphide group linking in hair and from fixed covalent bonding in a contact adhesive to relatively weak hydrogen bonding ingels.

Taken individually, polymeric molecules will arrange in multiple geometric configurations. Some of these will have relatively high interaction cross-sections with the molecules around them. The level of interaction between  the  polymers  is  dependent  on  the  chemical   make-up  of  each  chain,  and  what  forms  of intermolecular interaction are therefore possible. The weakest of these, van der Waals interactions, are observed in unbranched chains of a polyethylene material. As branching is increased in the polymer chain, the side branches will act to increase the level of interaction and hence increase the resistance of the material to deformation.

The introduction of hydroxy, sulphur or nitrogen groups introduces the possibility of dipole or hydrogen-  bond  interactions,  which  are  several  orders  of  magnitude  stronger.  These  forms  of  interaction  will  therefore create materials that are more resistant to deformation, but can still be pulled apart relatively  easily. Due to the transient nature of the bonding, these bonds can also be used to create “self-healing” materials as the bonds can reform. on the edges of the material.

The strongest form. of cross-linking, achieved through chemical reaction, is the formation of covalent bonds between polymer molecules. The more covalent bonds are established between the molecules, the more rigid the material will become. However, unlike hydrogen bonded cross-linking, in the event of the bonds being broken, they will not spontaneously reform.

During the second worldwar James Wright was researching methods to create synthetic rubber as there was a high demand and shortage of rubber. In the process of these explorations, he found a method to create a cross  linked  polymer  material that exhibited some  unusual  properties.  His  reaction  involved boron-mediated chain breaking and hydroxy-boron bonding to link poly-methoxysilane molecules. The resulting material would bounce if dropped, and could be pulled or pushed into a rigid shape. However, if left to rest, the material would shift its shape to adopt the lowest energy shape for the environment, i.e. it would flow. If pulled slowly, the material could stretch out into along strand, but with a large rapid force applied, it would shear and break. Ultimately deemed useless at the time, it was a material that went on to be branded as “Silly Putty” (or slime), and ended up creating a multi-billion dollar company in the toy industry!

Cross-linking also has fundamental industrial applications and you should explore some of these in your own write-up.

Measurement of properties – Rheology Rheology

Rheology is a tool to study and measure the deformation (flow) of matter upon the application of stress (or strain), by analysing the internal response of materials to forces.

This study can be carried out by observing and recording the behaviour of a material when subjected to linear or oscillatory stresses, and it is useful to characterise many materials, from low viscosity Newtonian fluids (including water and air) to soft materials with high viscosity. It can also be applied to materials having  complex  structures  such  as  suspensions,   emulsions,  polymers,  gels,   bodily  fluids  and  other biological materials.  Some of these soft materials can exhibit a unique complex behaviour that cannot be characterised by standard mechanical testing. These materials in fact exhibit a “viscoelastic” behaviour, they respond in a viscous or elastic way, depending on the speed or the amplitude of the shear applied to them.

When defining viscoelastic properties of a material, it is important to introduce G defined as the shear modulus of a material. G is a complex number made by an imaginary and a real component as per below:

G = G ′ + iG"

The storage modulus G′ describes the elastic properties of a material and the loss modulus G" describes the viscous properties of a material. In other words, G′(storage modulus) could be related to the Young’s Modulus E, and G" (loss modulus) could be related to the shear modulus.

Read Appendix 1 to know more on how this equation can be derived.

Figure 1: Description of the broad range of Rheological properties and behaviours of different materials.

:Newtonian behaviour: fluids exhibiting such behaviour will have a stress response linearly proportional to the shear rate, and the proportionality constant will be the viscosity. Examples are Water, Air and some Organic Solvents.

Viscoleasticity: The  property  of  a  substance  of  exhibiting  both  elastic  and  viscous  behaviour  when deformed, therefore exhibiting a time-dependent strain. Their viscosity value will be straindependent.

•     Elasticity: A  material is called elastic if the deformation produced in the body is reversible (the object will return to its initial shape and size when these forces are removed)

•    Viscosity: Viscosity is a measure of a fluid's resistance to flow. A material will be purely viscous if all the shear stress is transformed in strain. (the object will not return to its initial shape once forces are removed)

These differences in viscous to elastic behaviour are due to a characteristic internal  material time of relaxation. If this time is very short, compared to the time of deformation applied, the material will behave in  MATE40005 Use of Rheology to Guide Polymer ProcessingMatlab a viscous way. This time for water is, for example, 10-10s, meaning that any standard deformation will be always longer and the material will behave in a viscous way. If on the contrary, the material exhibits a very long intrinsic time compared to external stresses, it will mostly behave elastically. Time dependency is extremely crucial in Rheological measurements.

Polymers are viscous fluids. Silicone putty is a good example: It will behave like an elastic body if it is subjected  to  a rapid deformation such   as   bouncing  on  the  floor  (recoverable  deformation).   The stored energy makes the ball bounce back. On the other hand, if you hold the putty at rest for a long time, it will, by the gravitational force start flowing down. This flow is the viscous component of the behaviour of the silicone putty.

Non-Newtonian Behaviour: Some of the viscoelastic behaviour can be more complex, with G’ and G” varying depending on shear rate. Two examples of this behaviour are shear-thickening and shear thinning  substances. Most liquids, suspensions orgel materials will flow faster the harder they are pressed. This is  known as shear thinning (G’>G” at low shears and at high shears G”>G’ meaning that the material acts as  a solid at low shears and as a liquid at high shears). However in some cases the opposite effect is observed,  and the materials experience reduced flow with increased pressure, which is known as shear thickening  (G”>G’ at low shears and at high shears G’>G” meaning that the material acts as a liquid at low shears and  as a solid at high shears).

Shear-thickening examples: cornstarch + water, silly putty, quicksand Shear-thinning examples: blood, paints, toothpaste

This is due to Interactions between the molecules within the structure. Therefore, it is possible to tailor a material  to  select  between  shear-thinning  and  shear-thickening,  at  least  in  principle.  For  polymeric materials, especially those that are cross linked, this parameter can be controlled through consideration of the average molecular weight of the polymers, the extent of cross-linking, and the amount of solvent included in the matrix.

Tailoring rheological properties for processing and production

The longer a polymeric chain (i.e. the larger the molecular weight of the polymer), the more cross linking can occur between that polymeric chain and a neighbouring chain. This will lead to a more shear-thickening material. If the amount of cross-linking increases too much, then the material will become too stiff to ever exhibit any flow and hence will be prone to fracture. So there is a careful balance between increasing the cross linking to increase shear-thickening, and keeping it low enough to still allow flow of the material, if shear thickening is the desired principle.

It is important to realise that not all polymers that are cross-linked will flow. The conditions of flow are regulated as well by properties such as the glass transition temperature, melting point and decomposition or boiling point of the polymer. Some polymer materials are solid at room temperature and will undergo chain breaking at elevated temperatures before they reach a stage of flowing. Others will form crystalline solid structures that behave quite differently.

It is also important to recognise that in many cases, it is the presence of transient hydroxyl interactions that will lead to the properties such as shear-thickening. Therefore, the extent of water/hydroxy groups present in the material becomes an important consideration.

Also  worth  noting  is  that  polymeric  materials  are  not  alone  in  exhibiting  properties  such  as  shear- thickening. Suspensions in water can show the same properties.

Shear-thinning materials will follow exactly the opposite behaviour. If there is no force applied, they will hold their shape, while if a force is applied, they will become fluid and flow.

Many layered structures, such as hydrated clays, will follow the same behaviour. This can be a significant problem (such as the case of the Leaning Tower of Pisa), or a significant advantage (such as clays used in pressure transfer in synthetic diamond production).

Applications of Rheology in Processing:

When  in  processing  and  production,  the  rheological  behaviour  of  materials  can  affect  the  final applications. Examples of applications include injectability, extrusion moulding, dip coating, spreading (lotions and paints) and jetting (inks).

It is important to be able to properly tailor and characterise the rheological behaviour of viscous fluids and viscoelastic  materials  before  their  application  in  processing  techniques.  Improper  characterisation  of shear-thickening fluids could causestall or damage on equipment when not accounted for and the same is true for shear-thickening liquids that, if not accounted for, could lead to poor mixing, cavitation or fast flow extrusion. In Figure 2, the working windows for different processes are reported and compared with the working range of the rheometer you have available in the lab.

Figure 2: Rheological window of uses in shear rate for different processing techniques, compared with

Rheometer range.

Types of Rheological tests:

The Rheometer is an instrument essentially composed of 2 parts (although very expensive ones). The rotating  top  geometry  (can  be  interchanged  from  cone  to  flat,  depending  on  the  type  of  samples measured) and a bottom flat plate. The sample is placed very tightly in contact with the 2 surfaces and is subjected to a controlled strain or strain rate and the parameter recorded is the stress in the material in response to the applied strain.

Flow tests.

These tests are usually carried out on Newtonian fluids, where the viscosity is constant. They can however also be used to observe the change in viscosity with shear rate for non-Newtonian materials. Flow tests are based on measurements in controlled shear rate, the rheometer applies a rotational speed (w (rad/s)), translated into a shear rate (y(̇), s-1) and the measured data is a torque force that the material exerts in response to the plate rotating, recorded therefore as a shear stress (τ (Pa)). To obtain the viscosity η of a material the equation below (also referred to as Newton’s Law) is used:

Figure 3: Flow test mechanism and plots obtained using arheometer with relevant equations.

Oscillatory tests.

Oscillation tests are normally used to measure the viscoelastic properties of materials.  By imposing a sinusoidal wave (stress) in oscillation, varying with time, on the material we can measure both the viscous component and the elastic component by measuring the resulting sinusoidal strain on the material and the phase angle δ, the difference between the input and the output waves. When the behaviour of a material is purely elastic, δ will be 0°, as stress and strain will be in phase. When the behaviour of a material is purely viscous instead, with stress and strain out of phase, δ will be 90° .   Viscoelastic materials are somewhere in the middle between these 2 behaviours and will exhibit a phase angle comprised between these two ideal cases depending on the rate of deformation.

Figure 4: Oscillatory test  mechanism with associated  mechanical  sinusoidal response  using a  rheometer with relevant equations.

The   output   graph    of    a   rheometer    in   small    amplitude   oscillatory    measurements    (SAOS)   will show the storage  modulus (elastic part G’) and loss   modulus  (viscous part G") as  a  function  of  test frequency (“) (as in Fig 5). The phase shift is often expressed as loss tangent (tan δ) that is equal to the energy lost to energy stored (G"/G’), describing the relative degree of viscoelasticity. The modulus value at this point is called the cross-over modulus and this indicates the state of matter is crossing over from liquid to solid (onset of gelling) or viceversa. Different types test setups can be arranged which are strain or stress sweep, frequency sweep, temperature sweep and time sweep.  (Practical Food Rheology: An Interpretive Approach pp148-149).

We will be applying the frequency sweep test during this lab demonstration to investigate time-dependent shear behaviour of your polymeric material.  High frequency represents short term behaviour (remember the  bouncing  putty  example),  and  the  low  frequency  represents  the  long term  behaviour  (stretching putty).  In general elastic response is prominent for the short time and viscous behaviour for the longtime tests.  In frequency seep tests,a sinusoidal strain (or stress) of fixed amplitude is applied on the material, and the dynamic moduli are determined over a wide range of frequencies.

Figure 5: Example Plot of frequency dependence of G" and G’ .

2. Experimental procedure

Task 1 (spend no more than 1 hour on this task)

Materials needed: syringes (without needle - 5ml or 20ml), plastic beakers (10 per table), solutions as listed below, stirring sticks.

You have been provided with multiple materials in various forms. In this portion of the practical, you will need to experiment with each and predict whether each is shear-thinning or shear-thickening, Newtonian or viscoelastic.. In order to carryout this assessment, you should prepare the materials as described below and then explore the  behaviour of the  material when: stirred  rapidly,  poured from one  container to another, and when forced to flow out of a syringe. Using the theory as described in the introduction, you should then predict and discuss as a group what type of behaviour you are seeing.

•    Use distilled water as provided.

•    Use the tomato ketchup as provided.

•    Use the mayo as provided.

•    Use the oil as provided.

•    Use the golden syrup as provided.

•    Use the toothpaste as provided.

• Mix corn flour and water 2:1 volume ratio.

•    Use the hair gel as provided.

•    Use the rubber film as provided.

Observe, as shown by the GTA, how the rheometer works and, once you have explored and made your predictions  regarding  the  type  of   behaviour  of  each   material  (Newtonian,  shear  thickening,  shear thinning), consider the rheological data collected for a single material. You will be provided all the other sets of data but explore only one material at the rheometer. All materials can be disposed of down the drain, except the rubber.

A GTA will carryout 2 different tests: Flow tests and Oscillatory tests, depending on the material provided. The GTA will setup for both of the different tests. Compare and discuss with each other and your GTA regarding  your  predictions  and  what  was  observed  in  the  data.  Try  to  explain  using  molecular considerations,what is happening in each material to cause the observed rheological data.

Discuss in the lab with GTA: What is the difference  between the various materials? Can these materials show more than one behaviour at the sametime? E.g         

印尼稻米收成与粮食安全数据集2026年 本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。 立即下载

相关推荐

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 662

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

具有PWM控制VSC-HVDC链路的IEEE30总线传输系统(Simulink仿真实现)

内容概要:本文详细介绍了基于Simulink仿真实现的具有PWM控制VSC-HVDC链路的IEEE30总线传输系统,系统性地阐述了电压源换流器高压直流输电(VSC-HVDC)的技术原理及其在复杂电力系统中的集成应用。研究重点涵盖VSC-HVDC系统的基本结构、PWM调制控制策略的设计与实现,并将其嵌入IEEE30节点标准测试系统中,构建完整的多区域交直流混合输电仿真模型。通过Simulink平台对系统在不同运行工况下的动态响应进行仿真分析,验证了PWM控制在有功功率、无功功率独立调节、直流电压稳定及故障穿越能力方面的有效性。该仿真模型不仅有助于深入理解现代高压直流输电技术的工作机制,也为含大规模可再生能源接入的智能电网稳定性分析与优化控制提供了可靠的技术支撑与研究平台。; 适合人群:具备电力系统分析、高压直流输电技术基础以及Simulink/MATLAB仿真能力的研究生、科研人员及从事电力系统规划与运行的工程技术人员。; 使用场景及目标:① 掌握VSC-HVDC系统的核心控制原理及其在多节点电网中的建模方法;② 学习并实践基于PWM调制的矢量控制策略在Simulink中的实现过程;③ 对比分析交直流系统在稳态与暂态过程中的功率传输特性与动态响应,为新能源并网、电网互联等实际工程问题提供仿真依据和技术参考。; 阅读建议:建议读者结合文中理论分析与Simulink仿真模型,逐步完成模型搭建与参数设置,并通过改变系统运行条件(如负载投切、故障扰动等)观察系统响应变化,深入理解控制策略的有效性与局限性。同时,鼓励扩展模型功能,如引入风电/光伏等可再生能源接口,进一步探索VSC-HVDC在现代电力系统中的综合应用潜力。

九个版本一步跨:从JDK8到JDK17的特性增量、强封装迁移与ZGC实战解析

这篇文章要回答的,正是“从 JDK 8 直接跨到 JDK 17”这件事里最常被问到的四个问题: 九个版本到底攒下了什么? 语言、API、运行时三类变化里,哪些值得用、各自从哪个版本开始可用、哪些说法其实传错了。 升级为什么会“起不来”或“跑不通”? 强封装、被删除的模块、被移除的 JVM 参数,分别会以什么样子出现,怎么定位、怎么治本。 ZGC 的收益是真的吗?怎么测才算数? 停顿影响面怎么估算,压测时有哪些坑会把收益放大或掩盖。 落地要分几步走? 站在 2026 年,还该不该把 17 当终点。

上一篇: FIN 301 Midterm 2 Review Questions
下一篇: Minor 2024 - FNCE90087Java
wx_codinghelp
博客等级 码龄2年 691粉丝 84原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值