FIT3031 - Network Security

【信息科学与工程学】【通信工程】第七十九篇 网络规划中的方案中的数学建模01 编号学科网络领域产品核心知识点与数学方程式在网络设计中的详细作用理论/工程依据 关联知识和法律法规1概率论与数理统计​流量工程与负载均衡​路由器、交换机、SDN控制器核心知识点:​ 排队论 方程式:​ M/M/1队列平均等待时间 W=μ(μ−λ)λ​ 变量定义:​ λ = 平均到达率 (packets/s), μ = 平均服务率 (packets/s) 单位:​ packets/s, s 数值设计:​ 需满足 ρ=λ/μ<1 以保证队列稳定。 推导要点:​ 基于泊松到达过程与指 阅读详情

FIT3031 - Network Security: Assignment I (2024 S2)

Total Marks 100

Due date: September 20, Friday, 11:55:00 PM (Melbourne time)

1 Overview

The learning objective of this assignment is for you to gain a first-hand experience on network attacks (i.e., TCP/UDP scanning techniques and DNS attacks) and get a deeper understanding on how to launch these attacks in practice. All tasks in this assignment can be done on the unit’s virtual machine https://drive.google.com/file/d/1Jm5y1PXE_e_G-gs0Ng1aJ-aYB29B5bXN/view?usp=sharing as used in Lab Week 6-Network Attacks.

This is an individual assignment. You are not allowed to help or seek help from other people. You are not allowed to re-use any previous assessment submission materials (even if they were created by you).

2 Submission Policy

For this assignment, you need to submit two files using a single submission link on Moodle:

• a single video file containing the recording of you carrying out all tasks, and

• a single scanner.py file containing the final Python script. from Section 4.

Name your submission files as the format: [Your Name]-[Student ID]-FIT3031-Assignment1, e.g., HarryPotter-12345678-FIT3031-Assignment1.mp4. The Python codes for Section 4 should be included in a separate scanner.py file.

Moodle allows a maximum submission size of 500 MB. Therefore, the total size of the above two submission files should not exceed 500 MB.

Important notes and penalties:

• It is the student’s responsibility that the submitted video file can be opened on a standard Windows computer (without requiring specialised software), and that the images and texts shown in the video are understandable/readable (in English). If the video file cannot be opened, you will receive zero mark. After uploading draft files (before finalising the submission), we recommend you to download your uploaded files and check that they open and run properly and as intended. Once you finalise your submission, you will not be able to revise it.

• Note that draft files are NOT accepted and will not be marked. You must finalise your submission (with status shown as “submitted for grading”) for your assignment to be considered as valid. Otherwise, you may receive late submission penalty or zero mark.

• Note that during your assignment submission, you may see a Turnitin warning for your video file stating something of the form. “This file will not be submitted to Turnitin. . . ”. This is completely fine, and you can simply ignore this message. The video file is not scanned by Turnitin.

• At the beginning of your recording, you must clearly show your face and have your photo ID (preferably your Monash ID with photo) presented in the first slide as shown below (please update the slide contents as appropriate). Make sure the ID card details are clearly readable/visible.

Figure 1: Sample opening slide

• A part of the submitted video (at a corner) must clearly show your face at all times. The assignment will be deemed invalid and receive zero mark when that’s not the case.

• Late submissions incur a 5-point deduction per calendar day. For example, if you submit 2 days and 1 hour late, that incurs 15-point deduction. Submissions more than 7 calendar days late will receive a zero mark.

• If you require extension or special consideration, refer to https://www.monash.edu/students/admin/assessments/extensions-special-consideration. No teaching team member is allowed to give you extension or special consideration, so please do not reach out to a teaching team member about this. Follow the guidelines in the aforementioned link. When requesting extension/special consideration via the central system, please select the correct assessment name from the provided drop-down menu, and not manually type an assessment name.

• The maximum allowed duration for the recorded video is 15 mins. Therefore, only the first 15:00 mins of your submitted video will be marked. Any exceeding video components will be ignored. Speeding up the video recording (e.g. using a software) is not allowed and such submissions will receive a zero mark.

• If your device does not have a camera (or for whatever reason you can’t use your device), you can borrow a device from Monash Connect or Library. It’s your responsibility to plan ahead for this. Monash Connect or Library not having available devices for loan at a particular point in time is not a valid excuse.

• You can create multiple video parts at different times, and combine and submit a single video at the end. Make sure that the final video is clear and understandable.

• All tasks must be live demonstrated instead of explaining an already completed task. You are not allowed to add voice-over later on. You are also not allowed to read from prepared scripts. At the beginning of each task, please clearly mention what task is being carried out in the video.

• If any task requires installing new software, you are allowed to do that in advance of recording your video. You do not need to demonstrate software installation in the video.

• You can do (online) research in advance, take brief notes and make use of them during your video recording. You may also prepare Python codes in advance. But you cannot simply copy-paste commands to carry out the tasks without any explanations. Explanations (of what the code does) while completing the tasks are particularly important.

• In Section 5.2, you may need to run the attack for a long time (in the order of a few hours) due to brute forcing. In this case, you can record the parts until the time-consuming step, pause/stop the video recording, and then continue to record once the time-consuming step concludes. You may merge multiple recordings as mentioned before.

• Zero tolerance on plagiarism and academic integrity violations: If you are found not adhering to the Monash Academic Integrity Policies, penalties will apply, e.g., a zero grade for the unit. The demonstration video is also used to detect/avoid plagiarism. University policies can be found at https://www.monash.edu/students/academic/policies/academic-integrity.

3 Environment Setup

In this section, you need to double check whether you have configured GNS3 correctly. We will be using the Week06 lab configuration, i.e., your GNS3 configuration should look like below:

Figure 2: GNS3 Config

Otherwise, if you just downloaded the VM for the first time, we refer you to Environment Setup in Week 01 (https://learning.monash.edu/course/view.php?id=19340§ion=7). It is recommended to perform. lab tasks of Week06 before proceeding.

4 Port Scanning Techniques [40 Marks]

A port scan is a common technique used by attackers to discover entry points in a system. The following task focuses on network traffic analysis and security measures related to port scanning techniques. By following the steps, students will analyse network interactions between a client and a server, identify and interpret the type of scan used, and explore countermeasures to enhance security. Additionally, students will gain practical experience by implementing evasive techniques in a scanner script. and observing the effects. The goal is to deepen understanding of port scanning concepts and hands-on mitigation strategies.

Download and copy the server.py file on to the Internal-Server and scanner.py on to the Internal-Attacker. Run Wireshark on any link between the 2 nodes. Run server.py as below with your student ID.

IMPORTANT: If you don’t use the correct student ID, your attempt will be deemed invalid and you will receive zero mark for this Section 4.

python3 server.py <Student ID>

Running the script. with your student ID will always open the same unique set of ports on the server.

Now run scanner.py as below and observe the traffic in Wireshark.

python3 scanner.py <Server IP>

Q1: Identify and explain the type of TCP scan by observing the traffic seen in Wireshark. Explain how the scan works. (2.5 marks)

Q2: Detecting port scans is an important aspect of network security as port scans can be an early indication of malicious intent. There are several methods and tools to help detect port scanning activities. Identify 3 traffic patterns you observed which can be used to detect the above-mentioned type of TCP port scans. (6 marks)

Q3: Evading port scanning countermeasures is often a tactic used by attackers to avoid detection. While these techniques are illegal and unethical when used without permission, understanding them is critical for strengthening security defences. Identify and explain 3 ways the above TCP scan can be modified to evade the countermeasures identified in the previous step. (6 marks)

Q4: Improve the scanner.py script. by implementing at least 2 evading mechanisms identified in the previous question. Run the scanner again and demonstrate the improvements using Wireshark. A part of the video must show and explain your Python code. (8 marks)

Now run scanner.py with UDP scan and observe the traffic in Wireshark.

python3 scanner.py <Server IP> --udp

Q5: Observe the traffic and explain how the UDP scan works (2.5 marks).

Explain why UDP scan results of the above scan can be unreliable. Identify and explain a technique that you could use to make the scan results more reliable. (10 marks)

Q6: Implement the above-mentioned technique in your script. and perform. the attack again. Demonstrate using the traffic in Wireshark to confirm the correct implementation. A part of the video must show and explain your Python code. (5 marks)

Notes.

1. All questions (Q1 to Q6) in Section 4 require a live demonstration and must be included in the final submission video. All explanations should be provided during the demonstration.

2. Do not use Python scripts in your demonstration or explanations unless explicitly mentioned in the question.

3. You may use the --start-port and --end-port arguments with the scanner.py to scope the scan into a small port range for demonstration purposes.

4. You must submit the final scanner.py file on Moodle as part of your assignment submission.

5 DNS Attacks – Using Scapy [60 Marks]

Domain Name System (DNS) is an essential component of the Internet infrastructure. It serves as the phone book for the Internet, so computers can look up for a “telephone number” (i.e. an IP address) from domain names. Without knowing the IP address, computers will not be able to communicate with one another. Due to its importance, the DNS infrastructure faces frequent attacks. In this section, you will explore the most primary attack on DNS. That is DNS cache poisoning by investigating both Local and Remote DNS cache poisoning attacks.

Due to the large number of computers and networks on the Internet, the domain namespace is organised in a hierarchical tree-like structure. Each node on the tree is called a domain, or sub-domain when referencing to its child node. The following figure depicts a part of the domain hierarchy.

Figure 3: Domain hierarchy

The domain hierarchy tree structure describes how the domain namespace is organised, but that is not exactly how the domain name systems are organised. Domain name systems are organised according to zones. A DNS zone basically groups contiguous domains and sub-domains on the domain tree, and assign the management authority to an entity. Each zone is managed by an authority, while a domain does not indicate any authority information. The following figure depicts an example of the example.com domain.

Figure 4: DNS Zones

Assume that example.com in the above figure is an international company, with branches all over the world, so the company’s domain is further divided into multiple sub-domains, including usa.example.com, uk.example.com, and france.example.com. Inside US, the usa sub-domain is further divided into chicago, boston, and nyc subdomains.

Each DNS zone has at least one authoritative nameserver that publishes information about that zone. The goal of a DNS query is to eventually ask the authoritative DNS server for answers. That is why they are called authoritative because they provide the original and definitive answers to DNS queries, as opposed to obtaining the answers from other DNS servers.

With such arrangement, the root zone for example.com only needs to keep records of who the authority is for each of its subdomains. By doing this, it maintains the independence among the branches in different countries and enable the administrative right of those subdomains, so the branch in each country manages its own DNS information. For a given DNS query, if your local DNS server does not know the answer, it asks other DNS servers on the Internet for answer via hierarchical authority servers. The following example demonstrates a dig (DNS query) for the domain www.example.net when sending the query directly to one of the root servers (i.e. a.root-servers.net).

Figure 5: DIG to the root server

There are four types of sections in a DNS response: question section, answer section, authority section, and additional section. From the above result, we can see that the root server does not know the answer (because the reply does not include an answer section, but it tells several authoritative nameservers for the net zone (the NS records in the authority section), along with their IP address if possible in the additional section). If you continuously dig the domain www.example.net on one these authoritative nameservers, you will finally end up with the answer section showing the IP address of the machine hosting the website for www.example.net.

When your local DNS server gets information from other DNS servers, it caches the information, so if the same information is needed, it will not waste time to ask again.

5.1 Local DNS Attack targeting Authoritative Nameserver [20 Marks]

We recalled that a DNS response contains question section, answer section, authority section, and additional section. If we only target the answer section, the attack only affects one hostname (as we did in our Week06 lab “DNS Spoofing Attacks”). Real DNS attacks usually target the authority section by providing a fake NS record for the target domain in the authority section. If the fake NS record is cached, when a victim’s local DNS server tries to find any IP address in the target domain, it will send a request to the malicious nameserver specified in the fake NS record. Such an attack can affect all the hostnames in the target domain. In this task, you will explore how to target the authoritative server of example.net and replace it with ns1.attacker.com and ns2.attacker.com.

Q6: Using Internal-Client as victim and Internal-Attacker as the attacker machine, perform. a DNS spoofing attack that modifies the authoritative server of example.net to be ns1.attacker.com and ns2.attacker.com. Please record and submit a video showing and explaining how you performed the attack. A part of the video must show and explain your Python code. (20 marks)

Hint: If the attack works, you should see a result as in the following figures for which the malicious authoritative servers have taken place.

Figure 6: Successful DNS spoofing attack

5.2 Remote DNS Attack targeting Authoritative Server [40 Marks]

For this task, the attacker (Internal-Attacker) and DNS server need to be in different LAN. We will move DNS server back to the Server LAN and configure its IP statically. The GNS3 configuration for this task should look like below:

Figure 7: GNS3 for Remote DNS Attacks

Configure static IP for DNS:

Figure 8: Static IP config for DNS

Now login to Internal-FW (username is ‘admin’, no password), and execute the following to disable NAT:

ip firewall nat remove 0

Then login to Perimeter-FW (username is ‘admin’, no password), and execute the following to enable NAT only to the public facing interface:

ip firewall nat remove 0

ip firewall nat add chain=srcnat action=masquerade out-interface=ether1

The previous local DNS attacks assume that the attacker and the DNS victim server are on the same LAN so that the attacker can observe the DNS query message and reply with a forged DNS packet. When the attacker and the DNS server are not on the same LAN, the attack becomes harder since the attacker cannot perform. ARP poisoning attack and see the DNS query. When the DNS victim server cannot resolve a DNS query, it forwards the DNS query packet to the forwarder DNS server (Google DNS server in our current setup). The DNS query is sent via a UDP packet where the UDP’s source port is a 16-bit random number. In addition, the 16-bit transaction ID in the DNS header is also self-created by the DNS victim server. Hence, if the remote attacker wants to forge the DNS response, the forged packet must contain the correct values of these two numbers; otherwise, the reply will not be accepted.

Without being able to sniff the query packet, the remote attacker can only guess these two numbers. The chance is one out of 232 for each guess. If an attacker can send out 1000 spoofed responses, it may take several days to try up 232 time. In contrast, it only takes few seconds to receive the correct packet response from the forwarder Google DNS. Consequently, that real reply will be cached by the local DNS victim server. To make another try, the attacker has to wait for the server to send out another DNS query when its cache times out. Hence, this attacking chance makes the remote DNS attack unrealistic.

The remote DNS attack had become an open problem until Dan Kaminsky came up with a simple trick in 2008. The attack is depicted in the following figure.

Figure 9: Kaminsky Attack

We choose a domain test.com as our targeted domain name in this task. When a client queries the DNS server for www.test.com, the attacker (Internal-Attacker) wants to cause the DNS server to use their DNS server (ns.attacker.com). The following steps with reference to above figure describe the outline of the attack.

1. The attacker queries the DNS server for a non-existing name in test.com, for example xyz123.test.com, where xyz123 is a random name.

2. Since the mapping resolution cannot be resolved by the DNS server’s cache, the server forwards the query to Google DNS (8.8.8.8) for that name resolution.

3. In the meantime, the attacker floods the DNS server with many spoofed DNS responses, each trying a different transaction ID and source port number (hoping one guess is correct). In that forged response, not only the attacker provides the IP resolution for the hostname xyz123.test.com, but also provides an authoritative name server for the domain test.com.

Even if the response failed, the attacker would go back to Step 1, and try another non-existing random name until the attacker succeeds.

4. Once the attack succeeds, when the client sends a DNS query to the poisoned DNS server for www.test.com, the nameserver returned by the DNS server will actually be set by the attacker.

To simplify and shorten the attack’s simulation time in this task, we suggest you follow the below steps before doing the task.

1. Double check the IP addresses of the server, attacker, and client to ensure the server and the attacker are not in the same LAN (using ifconfig command)

• DNS: 10.10.5.53

• Internal-Attacker: 10.10.10.X

• Internal-Client: 10.10.10.X

2. In the DNS server’s terminal, you can type the following command to configure DNS

nano /etc/bind/named.conf.options

Then, you should configure the forwarder 8.8.8.8, enable recursion and fix the query source port of the DNS server (i.e. 33333). With this constraint, the attacker now only needs to guess the transactionID of the DNS packet when performing remote DNS attacks. You can review the following figure for the correct configuration of DNS server.

Figure 10: DNS server config file

3. After making the changes in the above step, you should restart your DNS server by using the following command

/etc/init.d/named restart

We provide you the remote dns.py script. template on Moodle that helps to perform. the Kaminsky attack.

Q7: You need to complete Step 1 in the remote dns.py to create 10000 dummy hostnames. Demonstrate and explain this task as before in your recorded video. (5 marks)

Q8: You need to complete Step 2 in the remote dns.py to generate a random DNS query for each dummy hostnames. Demonstrate and explain this task as before in your recorded video.(5 marks)

Q9: You need to complete Step 3 in the remote dns.py to flood about 100 random forged response packets. Demonstrate and explain this task as before in your recorded video. The demo should show that

• Each packet has a randomly generated transaction ID for DNSpkt. (5 marks)

• The malicious DNS server ns.attacker.com is included in the nameserver authority for the domain test.com when you construct DNSpkt. (5 marks)

• Additional section showing ns.attacker.com has the IP of the attacker 10.10.10.X. (5 marks)

Q10: Provide further video demonstration evidence to support and verify that you have performed the attack. In the video, you need to demonstrate the following key points:

• Wireshark traffic captured on DNS server on eth1 shows the transactionID in DNS packet sent by DNS server to Google, and the correctly matched transaction ID in the forged packet sent by Internal-Attacker to the DNS server. (5 marks for step by step explanation of the attack using Wireshark in the demonstration video)

• Once the poisoning is completed, from Internal-Client’s terminal use dig command to send a DNS query for the specific subdomain for which the attack was successful (e.g. in below screenshot it’s issnuy6.test.com). Do you get the attacker’s IP? (5 marks)

• Now from the same terminal send a DNS query for www.test.com. If the attack was successful, the response should show ns.attacker.com in the authority section for the domain test.com. Was your attack successful? Explain in detail why or why not. (hint: you may refer to this paper for further information: https://www.cs.cornell.edu/~shmat/shmat_securecomm10.pdf) (5 marks for your explanation during the demonstration video)

Figure 11: Attacker’s screen shows poisioning was successful

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载

相关推荐

印尼稻米收成与粮食安全数据集2026年

本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。

FIT3031 - Network Security: I (2024 S2)Python

Notes.(5 marks)

wx_codinghelp的博客 1564

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 662

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

上一篇: PHYS2012 Quantum Physics
下一篇: Digital Marketing Strategy Online Media Campaign
wx__codinghelp
博客等级 码龄2年 514粉丝 61原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值