Project in Advanced Algorithms and Data Structures
COMP4134 UNNC
Overview
For this project, you are tasked with solving a real-world transportation problem. Formally speaking, it is
called the pickup and delivery problem with time windows (PDPTW). The pickup and delivery problem
(PDP) is a type of vehicle routing problem in which customers are paired together, and a pair must be
serviced by the same vehicle, see https://developers.google.com/optimization/routing/pickup_delivery
for example. In other words, a load must be collected from one location and delivered to another
location by a single vehicle. Clearly, there are also ordering or precedence constraints to ensure that the
collection site is visited before the delivery site. If there are time windows during which the customers
must be visited, then the problem is known as the PDPTW. This problem commonly arises in real-world
logistics, and solution methodologies have significant practical applications.
While planning the routes, there are some driver break regulations that have to be met, which include
drivers' hours rules and working time rules. To reduce complexity, we will focus on the rules highlighted
in red circles, which pertain to the daily transportation problem. The objective is to decrease the total
duty time necessary for the delivery of all orders.
The two regulations are briefly introduced below; detailed information can be found in Table 1 (see
https://assets.publishing.service.gov.uk/media/5e14b5b040f0b65dbed713a0/simplified-guidance-eudrivers-hours-working-time-rules.pdf
and Table 2). Regarding Regulation (EC) No 561/2006, the following
constraints should be met:
• The maximum daily driving time is 9 hours.
• Driver breaks could be one of the following: (a) For every 4.5 hours of driving, drivers must take a
break of at least 45 minutes. This break starts a new 4.5-hour driving period. (b) For every 4.5
hours of driving, drivers can take either one 45-minute break or two smaller breaks, one of at
least 15 minutes followed by another of at least 30 minutes.
Another regulation is Directive 2002/15/EC, which is a legislative act concerning the working time for
mobile workers engaged in road transport activities. It sets out the maximum limits on working time,
including driving time, other work-related activities, and on-call time. The following constraints should be
met:
• Drivers cannot work more than 6 hours without a break; a break should be at least 15 minutes
long.
• Drivers need a 30-minute break if they work between 6 to 9 hours in total. 2
Table 1 A summary of the EU drivers’ hours rules and sector specific working time rules
Table 2 Summarised daily allowed drive time, duty time and route duration
Deadline and Late penalty
Deadline is 6pm Monday the 9th of December, for each day the coursework is late, a penalty of 10% will
be deducted.
Plagiarism is not allowed, and your source code and documentation will be examined for similarities.
Please note that this is individual work, not a group project. You are encouraged to conduct individual
research and free to implement algorithms that have already been published, but copying others’ work
is strictly forbidden. (Please consult the academic misconduct policy for further details:
https://www.nottingham.ac.uk/studentservices/servicedetails/appeals-complaints-andconduct/academic-misconduct.aspx)
Submission instructions
To submit your code and report for this module, please use the provided link on the Moodle page. Your
algorithm should be implemented in Java, and your report, which is limited to 2000 words, must be
submitted in PDF format. Please refer to the “Grading Criteria” section below, which lists the requirements.
The submission link will be active before the deadline. Please note that submissions sent via email will not
be accepted. For comprehensive guidelines on the submission process, please consult the “Submission”
section below.
Submission
Given that this is a Master's level project, it is designed to emphasize independent study and research.
However, certain algorithms and data structures relevant to the project will be introduced in the course
module COMP4133. Proficiency in Java is required for the successful completion of this project.
The necessary files for this assignment are available for download from Moodle. These include:
• `Input.json`: An example file that you will read as input.
• `Output.txt`: A sample output file that corresponds to the `Input.json` input.
Your Java code should fulfill the following requirements:
1. Read the content of `Input.json`.
2. You are required to devise your own algorithm and apply it to solve the given problem.
Implementing an existing algorithm from the literature is fine, but please cite it in your report.
You may select from various algorithmic approaches, including but not limited to dynamic
programming, linear programming, and heuristics. Your implementation will be submitted for
grading.
3. Print the solution follow the expected ‘Output.txt’.
For instance, given the content of 'Input.json' provided:
Please refer to the video recording on the module page for this module for a detailed explanation of
the JSON content. 4
The expected 'Output' should look like this:
Which appears as follows in the text file:
VehicleName,JobId,JourneyTime,ArrivalTime,WaitTime,DelayTime,ServiceTime,DepartureTime,Break1Ti
me,Break1Duration,Break2Time,Break2Duration
1,Vehicle 1 start,0h0m,08:00,0h0m,0h0m,0h0m,8h0m,,,,
1,C-0,0h0m,08:00,0h0m,0h0m,0h0m,8h0m,,,,
1,C-1,4h0m,12:00,0h0m,0h0m,0h0m,12h0m,,,, 5
1,D-0,0h0m,12:00,0h0m,0h0m,2h0m,14h0m,14:00,0h15m,14:45,0h30m
1,D-1,2h0m,16:45,0h0m,0h0m,0h0m,16h45m,,,,
1,Vehicle 1 end,0h30m,17:15,0h0m,0h0m,0h0m,17h15m,,,,
Grading Criteria
Criteria of code 50% Full mark Comment
Is the output correct? 20% The correct answer will receive full
marks. Marks may be deducted for
the following reasons: partially
correct answers with minor
mistakes, or correct output
accompanied by other issues. This
will be tested using a new dataset,
which is not provided by the
module. For programs involving
randomness, ensure that you use
your student ID as the seed.
How is the time complexity of the program? 10% For those who provide the correct
answer, their run time will be
recorded. Those whose run time
falls into the first quantile will
receive full marks. Those in the
second quantile will receive 7.5% of
the total marks, the third quantile
5%, and the last quantile 2.5%.
How is the solution quality of the program? 10% Please indicate the duration
required for the solution to
complete all the service requests
(i.e. pickup and delivery pairs)
within run time of 30 seconds. For
those whose solution is better than
the benchmark solution, the
ranking will be determined by the
speed of completion; the quicker
the completion, the higher the
ranking. Participants whose
solutions fall within the top 25%
will be awarded full points. Those
in the second 25% bracket will earn
75% of the total score, the third
25% will get 50%, and the bottom
25% will receive 25%.
Well formatted code 5% Is the program well formatted
(following Java naming
conventions, high readablity, 6
appropriate error handling, adhere
to Object-Oriented Programming
paradigm etc.)
Appropriate comments 5% Does the program contain
appropriate comments?
Criteria of report 50%
Well-written literature review 10% In the literature review, is the
literature sufficient, up-to-date,
well-organised, and does it follow
proper logical flow? The report
should be confined to a maximum
of 2000 words, excluding literature
and pseudo code.
Evaluation of the Chosen Algorithm, Data structure
and Methodology
15% Provide a clear rationale for the
algorithm selected and the
approach taken to solve the
problem.
Indicate whether the algorithm is
entirely of your own design or if it
is an implementation of an existing
algorithm from the literature.
Discuss the innovative aspects or
novelties that you have introduced
to the project.
Provide clear and effective documentation of your
algorithm
10% In your report, ensure that you
provide a clear and concise
explanation of your algorithm.
Utilise clear instructions, supported
by pseudocode, diagrams, and
other visual aids as necessary to
enhance understanding.
Evaluating solution quality and output validation
accuracy
10% Justify the solution’s quality and
confirm that the given output is
correct.
Report the result clearly 5% Report the results clearly, for
example, by using visuals, plots,
and statistics such as the mean and
standard deviation of a number of
runs.
Additional Credit: We are primarily evaluating compliance with the rules for individual days. However,
an extra 10% bonus (up to maximum of 100%) will be awarded if rule sets beyond those highlighted in
the red squares are taken into account.
Definitions
Standard input 7
System.in, means that the stream from which input to the program is taken. Typically this is the
keyboard, but it can be specified that input is to come from a serial port or a disk file.
Standard output
System.out, means that the stream to which output from the program is sent. Typically this is a display,
but it can be redirected to a serial port or a file.
Submission
You must submit a single Java source code file containing all your code for this coursework. This file
must be called AADS.java and must not require any other files outside of the standard Java packages
which are always available. The file must compile and execute without warnings or errors using the
command.
Compile: javac -encoding UTF-8 -sourcepath . AADS.java
Execute: java -Dfile.encoding=UTF-8 -XX:+UseSerialGC -Xss64m -Xms1920m -Xmx1920m AADS <
Input.json > Output.txt
Your program SHOULD send its output to standard output (by executing above command, it will produce
Output.txt in the same directory as AADS.java and Input.json, so no FileWriter is required).
Technical Notes
This part contains important technical information and it is important that you read and understand all
the information below.
You program MAY have multiple classes if you wish, but only in one java file. And only the class with
your main method SHOULD be marked as public.
Your program MUST read its input from standard input.
If your program exits with a non-zero exit code, it will be judged as a run-error.
Program submitted will be run inside a sandbox. The sandbox will allocate 2GB of memory for your
program. Your entire program, including its runtime environment, must execute within this memory
limit. For Java, the runtime environment includes the interpreter (JVM).
We suggest that you do not use package statements (that is, we suggest that your solution reside in the
“default package”).
Please use JDK versions later than 7.
Possible results
A submission can have the following results: 8
CORRECT The submission passed all tests: you solved this problem!
0% will be given to errors listed below:
COMPILER-ERROR There was an error when compiling your program. Note that when compilation takes
more than 30 seconds, it is aborted and this counts as a compilation error.
TIMELIMIT Your program took longer than the maximum allowed time for this problem, 5 seconds.
Therefore it has been aborted. This might indicate that your program hangs in a loop or that your
solution is not efficient enough.
RUN-ERROR There was an error during the execution of your program. This can have a lot of different
causes like division by zero, incorrectly addressing memory (e.g., by indexing arrays out of bounds),
trying to use more memory than the limit, reading or writing to files, etc. Also check that your program
exits with exit code 0!
NO-OUTPUT Your program did not generate any output. Check that you write to standard out.
OUTPUT-LIMIT Your program generated more output than the allowed limit. The solution is considered
incorrect.
WRONG-ANSWER The output of your program was incorrect. This can happen simply because your
solution is not correct, but remember that your output must comply exactly with the specifications of
the judges. See testing below for more details. The judges may have prepared multiple test files for each
problem.
Some hints for you to improve your solution
Scenario 1
a. The driver takes a break of 30 minutes after working for 6 hours. Then, the driver resumes driving for
another 30 minutes, followed by another break of 30 minutes, because of the 4.5 hours of driving time
accumulated.
Scenario 1 a
b. However, this driver break assignment can be improved by allocating a 45- minute break when the
duty time has been accumulated to 6 hours rather than allocating an additional 30-minute break when
reaching 4.5 hours of driving because the driving hours have been reset by the 45-minutes break. 9
Scenario 1 b
Scenario 2
a. This scenario is similar to the previous one, but the driver in the previous scenario completes his
journey after 2.5 hours of driving after the first break. In this case, however, the driver continues to
drive for 4 hours and 40 minutes after the first break.
Scenario 2 a
b. Allocating 45 minutes to reset the driving break is no longer a good idea in this scenario because
another break will be triggered due to reaching 4.5 hours driving time. As a result, the journey will take
12 hours and 10 minutes.
Scenario 2 b
Scenario 3
a. After working for 6 hours, a break of 30 minutes is given. Then, driving is resumed for 2.5 hours more
and another break of 15 minutes is taken, as the duty time has reached 9 hours. After one more hour of
driving, another break of 30 minutes is required, because the total driving time is 4.5 hours. 10
Scenario 3 a
b. This driver breaks assignment can be improved by allocating a 45-minute break when the duty time
reaches 6 hours. This journey requires no additional breaks because the 45-minute break reset the
driving hours.
Scenario 3 b
Scenario 4
a. This scenario is similar to the previous one, except that in the previous scenario, the driver completes
the journey after 2.5 hours of driving after the first break. However, after the first break, the driver
continues to drive for 4 hours and 40 minutes.
Scenario 4 a
b. Allocating 45 minutes to reset the driving break is no longer a good idea in this scenario because
another break will be triggered due to reaching 4.5 hours driving time. As a result, the journey will take
12 hours and 10 minutes.
Scenario 4 b
c. However, if we increase the second break in Scenario 4 a from 15 to 30 minutes, no further driver
breaks are required. As a result, the journey is reduced to 11 hours and 40 minutes.
Scenario 4 c
Scenario 5
a. The arrival time at the customer site was 2:30, but a wait of 15 minutes was required due to the time
window constraint. A break was assigned during the wait. A duty break of 15 minutes was given after
working for 6 hours. After that, driving was resumed for 45 minutes, when a driving break was needed
because the total driving time was 4.5 hours.
Scenario 5 a
b. This driver breaks assignment can be improved by allocating a 30-minute break after 6 hours of duty.
Because the accumulated 45 minutes break reset the driving hours, this journey requires no additional
breaks.
Scenario 5 b
Scenario 6
a. This scenario is similar to the previous one. But in this case, the driver continues to drive for 4 hours
and 40 minutes after the second break.
Scenario 6 a
b. Allocating 30 minutes break instead of 15 mintues to reset the driving break is no longer a good idea
in this scenario because another break will be triggered due to reaching 4.5 hours driving time. As a
result, the journey will take 11 hours and 55 minutes.
Scenario 6 b
13
相关推荐
压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar
压液氧(LOX)火箭发动机涡轮泵级建立了一条自动化的基于模型的系统工程(MBSE)与多学科设计优化(MDO)流水线.rar
【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c
AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。
在加性高斯白噪声和瑞利衰落信道上,针对BPSK_QPSK的误码率性能的MATLAB仿真,并扩展了相位优化的可重构智能表面辅助链路对比.rar
在加性高斯白噪声和瑞利衰落信道上,针对BPSK_QPSK的误码率性能的MATLAB仿真,并扩展了相位优化的可重构智能表面辅助链路对比.rar
DXF、DWG工程制图文件查看器
DXF、DWG工程制图文件查看器。 可以在界面中进行测量(包括距离、面积、角度等等) 无需版权,放心使用。
python 操作海康威视工业相机资源例子--ParametrizeCamera_LoadAndSave.zip
python 操作海康威视工业相机资源例子--ParametrizeCamera_LoadAndSave
数字农业与乡村振兴行业可信数据空间应用规划方案(专项申报版).pptx
数字农业与乡村振兴行业可信数据空间应用规划方案(专项申报版).pptx
含分布式电源的配电网可靠性评估研究(Matlab代码实现)
内容概要:本文围绕含分布式电源的配电网可靠性评估展开研究,基于Matlab代码实现相应的评估模型。研究内容涵盖分布式电源接入对配电网运行特性的影响,采用序贯蒙特卡洛模拟法等可靠性评估方法,对系统在不同运行场景下的供电可靠性指标进行量化分析。通过构建典型配电网模型,仿真分析分布式电源的位置、容量及出力特性对系统可靠性的影响机制,进而为提升配电网韧性与供电质量提供理论支撑和技术手段。研究不仅关注理论建模,还注重实际仿真流程的可操作性与结果的可视化呈现。; 适合人群:具备电力系统基础知识,从事配电网规划、运行与可靠性分析等相关领域的科研人员及工程技术人员,尤其适合研究生及从事新能源并网研究的1-3年工作经验的专业人员。; 使用场景及目标:①掌握含分布式电源的配电网可靠性评估基本理论与方法;②学习并复现主流可靠性评估算法(如蒙特卡洛模拟)的Matlab编程实现;③分析分布式电源接入对系统可靠性的影响规律,支撑配电网优化规划与运行决策。; 阅读建议:建议读者结合电力系统可靠性教材与本文Matlab代码同步学习,重点关注模型构建逻辑与算法实现细节,动手调试代码以加深对评估流程的理解,并尝试在不同网络结构和电源配置下进行仿真对比分析。
Python 列表、元组、集合实验报告:切片删除陷阱、可哈希判定与保序去重
Python 列表、元组、集合实验报告:切片删除陷阱、可哈希判定与保序去重
具有PWM控制VSC-HVDC链路的IEEE30总线传输系统(Simulink仿真实现)
内容概要:本文详细介绍了在Simulink环境中构建和仿真一个集成PWM控制的电压源换流器型高压直流输电(VSC-HVDC)链路的IEEE30节点电力传输系统的研究工作。该模型聚焦于利用PWM技术实现对VSC的高效、精确控制,以提升电力系统的传输效率、动态响应能力和运行稳定性。研究涵盖了系统整体建模、关键设备参数设计、PWM控制策略的实现、以及在标准IEEE30节点系统上的集成方法。通过一系列仿真测试,包括系统在正常运行、负载突变及故障条件下的动态响应,全面分析了VSC-HVDC链路对改善电网电压稳定性、优化潮流分布和增强系统可靠性的具体作用,充分验证了所提方案的有效性和工程应用价值。; 适合人群:具备电力系统分析、高压直流输电技术基础理论知识及Simulink/MATLAB仿真软件操作能力的高校研究生、科研机构研究人员和电力行业工程师。; 使用场景及目标:①作为教学案例,帮助学生深入理解VSC-HVDC的工作原理、控制策略及其在复杂电网中的集成应用;②为电力系统规划与运行人员提供一种可靠的仿真工具,用于评估新型输电技术对现有电网性能的影响,支持电网升级改造决策;③推动VSC-HVDC技术在远距离大容量输电、新能源并网和智能电网建设等领域的创新应用。; 阅读建议:建议读者在学习过程中,结合电力系统稳态与暂态分析的相关理论,重点关注PWM控制模块和VSC的建模细节,动手复现并调试所提供的Simulink模型,通过改变系统参数和运行工况来观察仿真结果的变化,从而深化对VSC-HVDC系统动态特性的理解。
T03_eVTOL低空经济低空无人机AI识别自动处理图像项目设计方案_决策评审版.pptx
T03_eVTOL低空经济低空无人机AI识别自动处理图像项目设计方案_决策评审版.pptx
基于斜坡补偿的Buck电路峰值电流+电压电流双闭环控制【附说明文档】(Simulink仿真实现)优快云首页发布文章优快云同步助手LLC谐振变换器开环+闭环软启动仿真设计(Simulink
内容概要:本文围绕三电平VIENNA整流器的双闭环控制与中点电位平衡问题展开仿真研究,提出了一种基于上下电容电压差值补偿的中点电位平衡策略。该策略在传统电压电流双闭环PI控制的基础上,引入电容电压差值作为反馈信号,通过SVPWM调制中冗余小矢量的时间分配实现中点电荷的定向调节,从而在不改变主控制结构的前提下有效抑制中点电位偏差。仿真结果表明,该方法不仅确保直流母线电压稳定跟踪800V给定值,还能显著提升上下电容电压的均衡度,同时保持输入电流低谐波水平,验证了控制策略的可行性和有效性。; 适合人群:电力电子、电气自动化及相关专业的研究生、科研人员及工程技术人员,具备一定的MATLAB/Simulink仿真基础和电力电子拓扑知识背景者更佳。; 使用场景及目标:①掌握三电平VIENNA整流器的工作原理与中点电位波动的成因;②理解电压电流双闭环PI控制的设计要点与参数整定原则;③学习基于差值补偿的中点电位平衡控制策略及其与SVPWM的协同机制;④应用于充电桩、航空电源、通信电源等中大功率单向整流场合的控制系统设计与优化。; 阅读建议:建议结合文中提供的仿真模型与参数设置进行动手实践,重点关注中点电位平衡投入前后电容电压波形的变化,对比分析不同工况下的系统动态响应,深入理解控制策略的作用机理。同时可进一步探索在电网不平衡、轻载等复杂工况下的控制性能,以拓展应用场景。
基于变频控制的多相交错LLC谐振变换器闭环仿真(Simulink仿真实现)
内容概要:本文详细介绍了基于变频控制的多相交错LLC谐振变换器的闭环仿真设计,重点阐述了其在Simulink环境下的建模与控制策略。通过多相交错技术有效降低输出纹波电流,提升系统效率与功率密度,并采用变频控制(PFM)实现对谐振变换器输出电压的精确调节。文中构建了完整的闭环控制系统,包含电压外环与电流内环,确保系统在负载变化或输入波动等扰动工况下仍能稳定运行。同时,配套提供了仿真模型、参数设计计算书及参考文献,帮助读者深入理解系统设计流程与关键技术细节,具有较强的工程复现价值。该资源适用于电力电子、新能源变换器等相关领域的仿真研究与教学实践。; 适合人群:具备电力电子基础知识,熟悉Simulink仿真工具,从事电源变换器设计、新能源系统研发或相关专业的研究生及工程技术人员。; 使用场景及目标:①掌握多相交错LLC谐振变换器的工作原理与变频控制机制;②学习并实现基于Simulink的闭环控制系统建模与仿真;③理解谐振参数设计、软开关实现及系统稳定性分析方法;④为科研项目、毕业设计或产品原型开发提供可复用的技术参考与仿真平台。; 阅读建议:建议读者结合提供的仿真模型与计算书,逐步完成系统搭建与参数整定,重点关注变频控制逻辑与闭环响应特性。在仿真过程中,可通过调整负载、输入电压等条件,观察系统的动态响应与稳态性能,加深对多相交错与谐振控制优势的理解。同时推荐参考相关文献,拓展对LLC变换器前沿控制策略的认识。
自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标(Matlab代码实现)
内容概要:本文针对“自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标”开展研究,提出一种基于Matlab的仿真方法,实现多机器人在动态环境中对移动目标的协同包围与持续跟踪。该方法综合考虑了机器人的运动学约束与传感器的视线(visibility)限制,设计了分布式控制策略与自适应编队算法,能够在复杂环境下有效维持编队结构的稳定性和任务执行的鲁棒性。研究详细阐述了系统建模过程、控制律设计原理、编队形成与保持机制,并通过Matlab代码实现了完整的仿真验证,展示了算法在不同动态场景下的适应能力与性能优势; 适合人群:具备机器人学、自动控制理论、多智能体系统等相关基础知识,熟悉Matlab编程语言,从事智能系统、协同控制、路径规划与自主导航等方向的研究生、科研人员及工程技术人员; 使用场景及目标:①应用于安防监控、环境探测、灾害救援等场景中的多机器人目标围捕与跟踪任务;②为多智能体协同控制、分布式编队保持、避障与可见性维护等关键技术提供可复现的算法框架与仿真平台;③辅助高校与科研机构在相关领域的教学演示与科研创新,深化对自适应控制与分布式协同机制的理解; 阅读建议:建议读者结合提供的Matlab代码逐模块分析其实现逻辑,重点关注控制律设计、约束处理与自适应机制部分,可通过调整机器人数量、目标轨迹、传感器参数等进行扩展性实验,以深入掌握多机器人协同系统的动态行为与优化方法。
两路半桥LLC谐振变换器软开关Simulink仿真(模拟谐振参数不同、分裂电容)
内容概要:本文详细介绍了两路半桥LLC谐振变换器软开关的Simulink仿真研究,重点模拟了不同谐振参数及分裂电容对系统性能的影响。通过建立精确的电路模型,分析了软开关实现条件、谐振腔参数变化对电压电流波形、效率及功率传输能力的作用机制,探讨了分裂电容结构在改善均流特性与提升系统稳定性方面的优势。仿真结果有助于深入理解LLC变换器的工作原理与动态响应特性,为高频高效电源设计提供理论支持与优化方向。; 适合人群:电力电子、电气工程及其自动化等相关专业的科研人员、研究生及从事开关电源设计的工程师。; 使用场景及目标:①掌握LLC谐振变换器的基本建模与仿真方法;②研究谐振参数(如谐振电感、电容)对软开关过程的影响规律;③分析分裂电容结构在多路并联变换器中的均流与稳定性作用;④为高频高效DC-DC变换器的设计与优化提供仿真依据和技术参考。; 阅读建议:建议结合Simulink模型逐步操作,关注关键波形的观测点,对比不同参数下的仿真结果,深入理解软开关的实现条件与系统动态特性,同时可进一步拓展至效率分析与热管理设计。
patch_1.23.0.2584_game_No6.android.pak
patch_1.23.0.2584_game_No6.android.pak
状态估计【卡尔曼滤波kalman】UKF、EKF、粒子滤波PF学习与研究(Matlab代码实现)
内容概要:本文系统地研究了无迹卡尔曼滤波(UKF)、扩展卡尔曼滤波(EKF)和粒子滤波(PF)在非线性系统状态估计中的理论基础与实际应用,并结合Matlab代码实现进行了深入剖析。内容涵盖三种滤波算法的核心原理、数学推导及其在轨迹估计等工程问题中的具体实施方法。通过详尽的Matlab编程实例,展示了如何利用这些先进滤波技术解决如目标跟踪、传感器融合等复杂问题,并特别探讨了BP神经网络与EKF结合的优化训练策略以及粒子滤波在提高状态跟踪精度方面的潜力。该资料为希望掌握现代状态估计算法的研究人员和技术爱好者提供了一套完整的理论与实践指南; 适合人群:具备一定编程基础,尤其是熟练使用Matlab工具,且对控制理论、信号处理或相关工程技术领域有初步了解的研发人员和高校学生; 使用场景及目标:① 深入理解UKF、EKF和PF的基本概念及其在非线性动态系统中进行状态变量估计的应用;② 通过Matlab代码实践加深对各滤波器工作机制的理解,能够独立开发相应的算法以应对诸如轨迹预测、多源信息融合等实际挑战;③ 探索将BP神经网络与EKF相结合的新途径,以期提升模型的学习效率和预测准确性; 阅读建议:此资源不仅提供了坚实的理论支撑,还包括丰富的代码示例,建议读者按照文档结构循序渐进地学习,同时动手实现每一个案例,以便更深刻地把握各种滤波技术的关键细节。对于致力于深入研究状态估计领域的专业人士而言,这是一份极具价值的学习材料。
数控基础知识数控加工工序的安排原则
数控基础知识数控加工工序的安排原则
SAP 分期付款,付款条件的要件定义方法
以上内容做好后,可以在F-02或者F-60里看设置后的结果。找到相关路径选择【维护支付条件】点击进入后,选择【新条目】再设置一个总的支付规则,注意这里【付款条款】一定要选择。例:默认付款条件SP00,改成刚定义好的0028即可。将刚才基础创建的付款条件,以以下方式录入,注意。028A- 30天到期,过账日期基础。028B- 60天到期,过账日期基础。028C- 90天到期,过账日期基础。目的:新建支付条款(本次以。的选择,然后保存后,完成。,【基准日期缺省值】选择。基础创建好了以后,选择【
658



被折叠的 条评论
为什么被折叠?



