CSC3150 Operating System

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载


CSC3150-Instruction-A3: 
Introduction
This assignment uses xv6, a simple and Unix-like teaching operating system, as the platform to
guide you in implementing the mmap and munmp system calls. These two are used to share
memory among proceses and to map files to process address spaces. Generally speaking, this
assignment focuses on memory-mapped files. A mechanism supporting memory-mapped files
can handle files as if they are a portion of the program's memory. This is achieved by mapping a
file to a segment of the virtual memory space (Reminder: Each process has its own virtual address
space). Such mapping between a file and memory space is achieved using the mmap() system call,
and the mapping is removed using the munmap() system call. We provide a virtual machine image
where everything is configured and set. The image is available on Blackboard.
submission
Due on: 23:59, 13 November, 2024
Plagiarism is strictly forbidden. Please note that TAs may ask you to explain the meaning of
your program to ensure that the codes are indeed written by yourself. Please also note that
we would check whether your program is too similar to your fellow students' code and
solutions available on the internet using plagiarism detectors.
Late submission: A late submission within 15 minutes will not induce any penalty on your
grades. But 00:16 am-1:00 am: Reduced by 10%; 1:01 am-2:00 am: Reduced by 20%; 2:01
am-3:00 am: Reduced by 30% and so on. (e.g. Li Hua submit a perfect attemp of
assignment3 on 2:10 am. He will get (100+10 (bonus)) * 0.7 = 77 points for his assignment3.)
You should submit a zip file to the Blackboard. The zip file structure is as follows.
Format guide
The project structure is illustrated below. You can also use ls command to check if your structure
is fine. Structure mismatch would cause grade deduction.
For this assignment, you don't need a specific folder for the extra credit part. The source folder
should contain four files: proc.c, proc.h, sysfile.c, trap.c
Please compress all files in the file structure root folder into a single zip file and name it using
your student ID as the code shown below and above, for example,
Assignment_3_xxxxxxxxx.zip. The report should be submitted in the format of pdf, together with
your source code. Format mismatch would cause grade deduction. Here is the sample step for
compressing your code.
main@ubuntu:~/Desktop/Assignment_3_120010001$ ls
Report.pdf source/
(One directory and one pdf.)
main@ubuntu:~/Desktop/Assignment_3_120010001/source$ ls
proc.c proc.h sysfile.c trap.c
(three .c files and one .h file)
Tips on interactions between host and virtual
machine
Here are some useful tips for you to interact between the host machine and the virtual machine. If
you are familiar with it and "Format guide", you can ignore this section.
In the terminal, you should not include "<" and ">". Here, they are just to present a custom string
variable.
1. Copy the assignment folder to your virtual machine. You can copy the folder in the
VSCode or use the scp command below.
$\newline$ 
In the host machine:
$\newline$
If you have spaces in the path, use the double quote to include your path, e.g. cd "your host
path" .
2. Unzip the assignment folder in your virtual machine.
$\newline$
In the virtual machine:
Then, you can browse the assignment folder.
After finishing the project, you should wrap your file following the format instructions. We
prepare a script for you to generate the submission zip. This optional script is just for your
convenience to wrap the files. You can wrap your file in your own way, only ensuring that you
follow the format.
3. Suppose that you have already copied your Report.pdf to the virtual machine (like the way
you copy the assignment zip from the host machine to the virtual machine).
In the virtual machine:
gen_submission.sh script will ask for your student id and path of your Report.pdf .
Then you can find your submission folder under ~/csc3150
project3/submission/Assignment_3_<your_student_id>.zip
4. You can use the following command to copy the submission zip to your host machine.
main@ubuntu:~/Desktop$
zip -q -r Assignment_3_xxxxxxxxx.zip Assignment_3_xxxxxxxxx
main@ubuntu:~/Desktop$ ls
Assignment_3_xxxxxxxxx Assignment_3_xxxxxxxxx.zip
cd <your_host_path_to_project_zip>
scp -P 2200 ./csc3150-project3.zip csc3150@127.0.0.1:~
unzip ~/csc3150-project3.zip ~/
chmod -R +x ~/csc3150-project3
cd ~/csc3150-project3
bash gen_submission.sh
In the host machine:
Then you will get the submission zip in your_host_machine_folder_path . Don't forget to
submit your zip file to the BlackBoard.
Instrction Guideline
We limit your implementation within proc.c, proc.h, sysfile.c, trap.c four files, where there are
some missing code sections starting with "TODO" comments. The entry (where you may start
learning) of the test program is the main function in mmaptest.c under the 'csc3150-project3/user'
directory.
Sections with (*) are introduction sections. These sections introduce tools and functions that will
help you understand what this system is about and how the system works with these
components. You might need to use some of the functions when implementing the TODO
parts.
You are ONLY allowed to modify the TODO parts in these four files! And we will grade your project
ONLY based on the implementation of the TODO parts. Any other modification will be
considered invalid.
1. For the introduction sections, please figure out how functions work and how to use them.
2. Be sure you have a basic idea of the content before starting your assignment. We believe that
those would be enough for handling this assignment.
3. (optional) For students who are interested in the xv6 system and want to learn more about it,
you are welcome to read "xv6-book" to get more details.
a. https://pdos.csail.mit.edu/6.828/2022/xv6/book-riscv-rev3.pdf
Sections without (*) are TODO sections. In these sections, the logic of how this component/
function should work is listed in detail. You should implement functions in the given places.
1. However, no sample code will be shown here. You need to figure out the implementation
based on the logic and APIs provided in the introduction sections.
Arguments fetching*
<xv6-book> chapter 4.3
The kernel functions argint , argaddr , and argfd retrieve the nth system call argument from
the trap frame as an integer, pointer, or file descriptor. They all call argraw to retrieve the
appropriate saved user register (kernel/syscall.c:34).
scp -P 2200 csc3150@127.0.0.1:~/csc3150-
project3/submission/Assignment_3_<your_student_id>.zip
<your_host_machine_folder_path>
void argint(int, int*);
int argstr(int, char*, int);
void argaddr(int, uint64 *);
int argfd(int n, int *pfd, struct file **pf);
Proc*
Pages*
<xv6-book> chapter3
// Define in proc.h
struct proc {
struct spinlock lock;
// p->lock must be held when using these:
enum procstate state; // Process state
void *chan; // If non-zero, sleeping on chan
int killed; // If non-zero, have been killed
int xstate; // Exit status to be returned to parent's wait
int pid; // Process ID
// wait_lock must be held when using this:
struct proc *parent; // Parent process
// these are private to the process, so p->lock need not be held.
uint64 kstack; // Virtual address of kernel stack
uint64 sz; // Size of process memory (bytes)
pagetable_t pagetable; // User page table
struct trapframe *trapframe; // data page for trampoline.S
struct context context; // swtch() here to run process
struct file *ofile[NOFILE]; // Open files
struct inode *cwd; // Current directory
char name[16]; // Process name (debugging)
struct vma vma[VMASIZE]; // virtual mem area
// Defined in proc.c
// Return the current struct proc *, or zero if none.
struct proc* myproc(void)
};
// Defined in riscv.h
typedef uint64 pte_t;
typedef uint64 *pagetable_t; // 512 PTEs
#endif // __ASSEMBLER__
#define PGSIZE 4096 // bytes per page
#define PGSHIFT 12 // bits of offset within a page
#define PGROUNDUP(sz) (((sz)+PGSIZE-1) & ~(PGSIZE-1))
#define PGROUNDDOWN(a) (((a)) & ~(PGSIZE-1))
#define PTE_V (1L << 0) // valid
#define PTE_R (1L << 1)
#define PTE_W (1L << 2)
#define PTE_X (1L << 3)
#define PTE_U (1L << 4) // user can access
Prots & Flags*
(TODO) Traps
Usertrap handles an interrupt, exception, or system call from user space. It calls r_scause() to get
the exception code. In this assignment, you are asked to handle the PageFault exception.
// one beyond the highest possible virtual address.
// MAXVA is actually one bit less than the max allowed by
// Sv39, to avoid having to sign-extend virtual addresses
// that have the high bit set.
#define MAXVA (1L << (9 + 9 + 9 + 12 - 1))
// Defined in fcntl.h
#define PROT_NONE 0x0
#define PROT_READ 0x1
#define PROT_WRITE 0x2
#define PROT_EXEC 0x4
#define MAP_SHARED 0x01
#define MAP_PRIVATE 0x02
// trap.c
void usertrap(void)
{
...
// TODO: manage pagefault
else if(r_scause() == 13 || r_scause() == 15){
...
}
...
}
// Supervisor Trap Cause
static inline uint64
r_scause()
{
uint64 x;
asm volatile("csrr %0, scause" : "=r" (x) );
return x;
}
// Supervisor Trap Value
static inline uint64
r_stval()
{
uint64 x;
asm volatile("csrr %0, stval" : "=r" (x) );
return x;
}
Hint:
r_stval() provides trap value. (i.e. the address causing the exception)
The swapping mechanism is not supported in the xv6 system. If the physical memory is filled,
you are expected to kill the process. (You shall learn to use kalloc() and setkilled()
functions)
If there is spare space in physical memory, map one page of the file with the corresponding
vma. ( mapfile() and mappages() )
// file.c
// read a page of file to address mem
// The off parameter in the mapfile and readi represents the offset
// from the start of the file where the read operation should begin.
void mapfile(struct file * f, char * mem, int offset){
// printf("off %d\n", offset);
ilock(f->ip);
readi(f->ip, 0, (uint64) mem, offset, PGSIZE);
iunlock(f->ip);
}
// vm.c
// Create PTEs for virtual addresses starting at va that refer to
File*
// physical addresses starting at pa. va and size might not
// be page-aligned. Returns 0 on success, -1 if walk() couldn't
// allocate a needed page-table page.
int mappages(pagetable_t pagetable, uint64 va, uint64 size, uint64 pa, int
perm)
{
uint64 a, last;
pte_t *pte;
if(size == 0)
panic("mappages: size");
a = PGROUNDDOWN(va);
last = PGROUNDDOWN(va + size - 1);
for(;;){
if((pte = walk(pagetable, a, 1)) == 0)
return -1;
if(*pte & PTE_V)
panic("mappages: remap");
*pte = PA2PTE(pa) | perm | PTE_V;
if(a == last)
break;
a += PGSIZE;
pa += PGSIZE;
}
return 0;
}
// Defined in file.h
struct file {
enum { FD_NONE, FD_PIPE, FD_INODE, FD_DEVICE } type;
int ref; // reference count
char readable;
char writable;
struct pipe *pipe; // FD_PIPE
struct inode *ip; // FD_INODE and FD_DEVICE
uint off; // FD_INODE
short major; // FD_DEVICE
};
// in-memory copy of an inode
struct inode {
uint dev; // Device number
uint inum; // Inode number
int ref; // Reference count
struct sleeplock lock; // protects everything below here
int valid; // inode has been read from disk?
short type; // copy of disk inode
short major;
short minor;
short nlink;
uint size;
uint addrs[NDIRECT+1];
};
// Write to file f.
// addr is a user virtual address.
int filewrite(struct file *f, uintaddr, int n);
// Increment ref count for file f.
struct file* filedup(struct file*);
// Close file f. (Decrement ref count, close when reaches 0.)
void fileclose(struct file*);
Struct "file" "inode" is presented for your information.
 
filewrite() will be invoked to write back when the memory map is over. i.e. Calling munmap or
Calling exit of process. Similarly to fileclose() .
filedup() will be invoked when there is an increment of accessing file. ( mmap() , fork() )
// Defined in fs.c
// Read data from inode.
// Caller must hold ip->lock.
// If user_dst==1, then dst is a user virtual address;
// otherwise, dst is a kernel address.
int readi(struct inode *ip, int user_dst, uint64 dst, uint off, uint n);
// Write data to inode.
// Caller must hold ip->lock.
// If user_src==1, then src is a user virtual address;
// otherwise, src is a kernel address.
// Returns the number of bytes successfully written.
// If the return value is less than the requested n,
// there was an error of some kind.
int writei(struct inode *ip, int user_src, uint64 src, uint off, uint n);
// Lock the given inode.
// Reads the inode from disk if necessary.
void ilock(struct inode *ip);
// Unlock the given inode.
void iunlock(struct inode *ip);
Function that you need to use when handling page fault, pay attention to how readi() works and
figure out the parameter you should send to readi() .
If you have no idea what readi() is doing, think about read() or memcpy(), which
deal with pointers and address.
imilarly as `writei()`
ilock() and iunlock() are locks of inode, which are used to ensure consistency of the memory.
Hint
You may take a look at sys_open() to know how inode, file, and locks work.
(TODO) VMA Struct
Explanation
The VMA (Virtual Memory Area) struct is used to manage and track the memory regions that are
mapped into the address space of a process. Each VMA represents a contiguous region of virtual
memory that has the same permissions and is backed by the same kind of object. The
operating system needs to keep track of these mappings, including where they start, how large
they are, what permissions they have, and what file or device they're associated with. This is
what the vma struct is used for.
Implementation
Keep track of what mmap has mapped for each process.
Define a structure corresponding to the VMA (virtual memory area), recording the address,
length, permissions, file, etc. for a virtual memory range created by mmap.
Since the xv6 kernel doesn't have a memory allocator in the kernel, it's OK to declare a fixed size array of VMAs and allocate from that array as needed. A size of 16 should be sufficient. (I
already define VMASIZE for you)
Hint
Take a look at what parameter will be sent into mmap() .
The VMA should contain a pointer to a struct file for the file being mapped;
If you would like to use more variables in VMA for further implementation, feel free to use them.
There is not only one correct answer.
(TODO) mmap()
// we already define size of VMA array for you
#define VMASIZE 16
// TODO: complete struct of VMA
struct VMA {
};
// Defined in user.h
void *mmap(void *addr, size_t length, int prot, int flags, int fd, off_t
offset);
// TODO: kernel mmap executed in sysfile.c
uint64
sys_mmap(void)
{
}
Arguments explanation:
In the mmaptest.c, we call 'char p = mmap(0, PGSIZE2, PROT_READ, MAP_PRIVATE, fd, 0);'. 
This call asks the kernel to map the content of file 'fd' into the address space. The first '0'
argument indicates that the kernel should choose the virtual address (In this homework, you
can assume that 'addr' will always be zero). 
The second argument 'length' indicates how many bytes to map.
The third argument 'PROT_READ' indicates that the mapped memory should be read-only,
i.e., modification is not allowed.
The fourth argument 'MAP_PRIVATE' indicates that if the process modifies then mapped
memory, the modification should not be written back to the file nor shared with other
processes mapping the same file (of course, due to PROT_READ, updates are prohibited in
this case).
The fifth argument is the file description of the file to be mapped.
The last argument 'offset' is the starting offset in the file.
The return value indicates whethermmap succeeds or not.
sys_xxx() function is the kernel's implementation of the xxx() system call. In the xv6
operating system, system calls are prefixed with sys_ to distinguish them from other
functions and to indicate that they are system calls. The kernel functions argint , argaddr ,
and argfd retrieve the n'th system call argument from the trap frame as an integer, pointer,
or a file descriptor. See the Arguments fetching section.
Run mmaptest after mmap() implemented: the first mmap should succeed, but the first
access to the mmap-ed memory will cause a page fault and kill mmaptest.
Before mmap() implemented
Page fault occurs after mmap() implemented(work correctly)
Progress chart
(TODO) PageFault Handle
<xv6-book>chapter 4.5,4.6
Add code to cause a page-fault in a mmap-ed region to allocate a page of physical memory.
Find corresponding valid vma by fault address.
Read 4096 bytes of the relevant file onto that page, and map it into the user address space.
Read the file with readi, which takes an offset argument at which to read in the file (but you
will have to lock/unlock the inode passed to readi).
Set the permissions correctly on the page. Run mmaptest; it should get to the first munmap.
See Section Trap
(TODO) munmap()
Implement munmap:
find the VMA for the address range and unmap the specified pages (hint: use
uvmunmap).
If munmap removes all pages of a previous mmap, it should decrease the reference
count of the corresponding struct file.
If an unmapped page has been modified and the file is mapped MAP_SHARED, write the
page back to the file. Look at filewrite for inspiration.
Ideally your implementation would only write back MAP_SHARED pages that the
program actually modified. The dirty bit (D) in the RISC-V PTE indicates whether a page
has been written. However, mmaptest does not check that non-dirty pages are not
written back; thus, you can get away with writing pages back without looking at D bits.
(TODO) Page Alignment
This is a reminder to raise your awareness that all the virtual addresses in your kernel
implementation should be page-aligned! It's very important to keep this rule in real
implementation. That is to say, wrap the addresses with PGROUNDUP or PGROUNDOWN under
different situations. You have to figure out which to use.
(EXTRA CREDITS) Fork Handle
In your Assignment 1, you should already know that fork() creates a sub process with the
same info. Therefore, you should handle how mmap() works when fork() is invoked.
Ensure that the child has the same mapped regions as the parent. Don't forget to increment
the reference count for a VMA's struct file. In the page fault handler of the child, it is OK to
allocate a new physical page instead of sharing a page with the parent. The latter would be
cooler, but it would require more implementation work.
Grading Rules
Program part 90' + extra credits
You can test the correctness of your code using the following commands under ~/csc3150-
project3 directory.
// TODO: complete munmap()
uint64
sys_munmap(void)
{
}
//defined in vm.c
void uvmunmap(pagetable_t pagetable, uint64 va, uint64 npages, int do_free);
make qemu
mmaptest
function points
mmap f 13p
mmap private 5p
mmap read-only 5p
mmap read/write 5p
mmap dirty 5p
mmap two files 5p
not-mapped unmap 12p
mmap offset 5p
mmap half page 15p
Compile Success 20p
fork_test (extra credit)
make qemu turns on the xv6 system, and you will see your terminal starting with $ . You can
execute ls command to see the files including 'mmaptest'. 
'mmaptest' command executes the executable file mmaptest to test your programs. You are
expected to have the following outputs
$ mmaptest
mmap_test starting
test mmap f
test mmap f: OK
test mmap private
test mmap private: OK
test mmap read-only
test mmap read-only: OK
test mmap read/write
test mmap read/write: OK
test mmap dirty
test mmap dirty: OK
test not-mapped unmap
test not-mapped unmap: OK
test mmap two files
test mmap two files: OK
test mmap offset
test mmap offset: OK
test mmap half page
test mmap half page: OK
mmap_test: ALL OK
fork_test starting
fork_test OK
mmaptest: all tests succeeded
Report part 10'
You shall strictly follow the provided latex template for the report, where we have emphasized
important parts and respective grading details.Reports based on other templates will not be
graded.
LaTex Editor
For your convenience, you might use Overleaf, an online LaTex Editor.
1. Create a new blank project.
2. Click the following highlight bottom and upload the template we provide.
3. Click Recompile and you will see your report in PDF format.



 

印尼稻米收成与粮食安全数据集2026年 本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。 立即下载

相关推荐

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

CSC3150 Assignment2 代码参考

给CUHKSZ学生的代码参考

weixin_56035504的博客 1350

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

CSC3150 需求

WARNING!!!system.MakefileSubmissiondetectors.└── source├── bonus└── test.c./normal./abort./stoppoints)Hints:

youthings的博客 205

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

【FDE知识库】(1):AI 编程时代开发语言选型分析,云使用go,企业用java,算法python,底层c

AI 编程时代,开发语言选型需综合考量AI适配度、编译速度、跨平台与学习成本。Python以海量语料和即时执行成首选,适用于AI/ML与原型开发;TypeScript凭借类型系统与秒级构建,成为前端及应用层主流;Go以极速编译与统一风格,契合AI代理高效迭代需求。Rust/C++虽性能强,但编译慢、学习成本高,不适于快速试错。综合推荐:优先选Python、TypeScript、Go,兼顾效率与生态,实现最优AI协作体验。

freewebsys的专栏 660

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

上一篇: Principles of Distributed Ledgers
下一篇: CPT111: A Simple Quiz System
wx____codinghelp
博客等级 码龄2年 771粉丝 115原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值