sgi集群管理软件SMC安装步骤整理

一：软硬件要求

1.硬件最低要求

管理节点

• 2.2 GHz IntelXeon or AMD Opteron (64-bit)

• 2 GB of RAM (4 GBor more recommended)

• 4 GB local diskspace (minimum) — 50 GB or more is typically used

• 100 Mbps management network (including switches and interface card) — 1000 Mbps recommended

计算节点

• 3.0 GHz IntelPentium 4 (32-bit) or 2.2 GHz Intel Xeon or AMD Opteron (64-bit)

• 1 GB RAM

• 100 MB local diskt ypically used, diskless operation is also supported

• 100 Mbps management network (including switches and interface card) — 1000 Mbps recommended

支持的管理平台

• Roamer

• IPMI

• DRAC

• ILO

• Intel Power NodeManager (IPNM)—Powered by Intel Data Center Manager (DCM

管理端至少有两个网口

2.操作系统要求

SMC管理端

You can run SGIManagement Center Server on the following operating systems and architectures:

• SUSE LinuxEnterprise Server 11 (also with SP 1 and SP 2)

• x86_64 hardware

• Red HatEnterprise Linux 6.0–6.4

• x86_64 hardware

• CommunityEnterprise Operating System (CentOS) 6.0–6.4

• x86_64 hardware

SMC Payload安装端

You can run the SGIManagement Center Payload Installation on nodes running the following operatingsystems and

architectures:

• SUSE LinuxEnterprise Server 11 (also with SP 1 and SP 2)

• x86_64 hardware

• Red Hat EnterpriseLinux 6.0–6.4

• x86_64 hardware

• CommunityEnterprise Operating System (CentOS) 6.0–6.4

• x86_64 hardware

SMC客户端

You can install andrun the SGI Management Center Client on the same operating systems andplatforms supported by

the SGI ManagementCenter Server as described above.

In addition, youcan install the client software on the following Windows platforms:

• Windows 7

• Windows Server2003

• Windows Server2008/Windows Server 2008 R2

• Windows Vista

• Windows XP

SMC支持的内核

SGI recommend susing the kernel that shipped with your version of Linux. If you need to upgrade your kernel, please

consult SGI before doing so.

 

注：此次使用的操作系统为SLES11SP2 x86_64

二：系统基本环境准备

1.设置主机名为admin

2.管理节点有eth0和eth1两个网口，此次eth0做为外网网口ÿ