H3C交换机设备常用命令

以下为H3C交换机设备常用命令。

 

display ip interface brief                                显示vlan-if信息

display interface brief                                    显示全部接口信息

interface Gigabitethernet 1/0/n                    设置接口 n

 

ip address x.x.x.x n.n.n.n                                 设置ip

undo ip address x.x.x.x n.n.n.n                       取消设置ip

 

display ip routing-table                                 显示路由表项

ip route-statics x.x.x.x n.n.n.n x.x.x.x               添加一条路由表项（先后顺序为IP+mask+nexthop）

undo ip route-statics x.x.x.x n.n.n.n x.x.x.x     删除一条路由表项

 

vlan number                                                   设置vlan（umber为要设置的vlanID）

port Gigabitethernet 1/0/n                            （在某vlan内）添加接口

interface vlan-interface n                              设置vlan-if n 接口

 

interface Bridge-Aggregation n                   设置聚合接口 n

port link-Aggregation group n                    （在接口1/0/x内）将该接口添加到聚合口n中

 

port link-type access/trunk                          设置接口类型access/trunk

port trunk permit vlan 100 to 110                将trunk接口批量添加到vlan 100 到 110 中

 

display this                                                     显示具体内容

shutdown                                                       （在接口内）接口down

undo shutdown                                             （在接口内）接口恢复

quit                                                                 退出