One or more breakpoints cannot be set and have been disable.Execution will stop at the begining of the programe

最新推荐文章于 2013-09-02 15:04:17 发布
原创 最新推荐文章于 2013-09-02 15:04:17 发布 · 888 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#mfc #library

本文介绍了在使用MFC进行程序开发过程中遇到的调试断点失效问题及其解决方案。作者分享了两种解决方法，包括调整项目的设置和使用静态库的方式。

我在直接用MFC向导出一个程序，调试时，断点放在APPMODU.CPP里可以，但放在WINMAIL.CPP中就出现这种提示。断点会变成空心的。网上搜的解决方法如下：

project->setting->c/c++-general->debug info->program databse for edit and continue ;

edit->breakpoints->removeall;

build->set active project configuration->*.exe win32 debug.

事实上没有效果，删除掉所有的断点后重来。又搜到如下解决方法：

Project->Microsoft Foundation Classes:Use MFC in a Static Library就行了

the-layout-and--use-of-Android-.rar_android
09-14
总的来说，这份"the layout and use of Android"的PDF文档是一份全面的Android开发入门指南，无论你是对Android感兴趣的新手，还是正在寻找基础知识回顾的开发者，都能从中受益。通过深入学习和实践，你将能够创建出...
烦人的 One or more breakpoints cannot be set and have been disabled.……
热门推荐
magictong的专栏
02-06 2万+
 在VC6.0里面调试的时候，有时候会出现下面这条警告：One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginning of the program，特别是调试DLL工程的时候，经常出现，非常烦，原来红色的断点标识变成了空心圆，此时如果继续调试所有的断点都失
One or more breakpoints cannot be set and have been disabled...
liufei_learning--脚踏实地，戒骄戒躁！
05-19 1487
<br /><br />错误现象：debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled.   Execution will stopat the beginning of the program.<br />解决方法，<br />1.在project->setting->c/c++-general->debug info->program databse
One or more breakpoints cannot be set and have been disabled.
specialsun的专栏
09-20 286
    有时在用VC6调试过程中,老遇到这个讨厌的提示"One or more breakpoints cannot be set and have been disabled",然后就跑到第一行去执行了.      看网上大多都是在设置中删除所有断点, 然后再重新设置新断点. 照做了一下,还是不能解决问题, 直到重新编译了程序(依赖库dll)才解决了问题. 这是因为本工程调用的dll太过了陈旧...
为什么无法设置断点？提示信息：One Or More Breakpoints cannot be set and have been disabled.execution will stop at the beginning
zhengminghui的专栏
09-05 2379
现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginning of the program.解决方法，1.在project->setting->c/c++-gene
One or more breakpoints cannot be set and have been disabled!Execution will stop at the beginning of the program
dazhi316的专栏
09-17 815
<br />对工程进行Rebuild All 就OK了
vc6.0调试提示one or more breakpoints cannot be set and have been disabled execution will stop at the beginning of the program
最新发布
11-16
我们正在解决VC6.0调试时出现“One or more breakpoints cannot be set and have been disabled. Execution will stop at the beginning of the program.”的问题。根据引用内容，结合之前的解决方案，我们给出以下...
The xdat breakpoint data and the x input vector must have the same sign, bias, and fractional slope. Also, the precision and range for x must be greater than or equal to the precision and range for xdat.
10-17
Looking at the history, this seems to be part of an ongoing technical discussion about Simulink lookup tables. The user clearly works with fixed-point systems and cares deeply about quantization ...
Cannot set breakpoint(s).

-HW breakpoint: all breakpoints in use.

-Sw breakpoint: cannot write to memory.
08-09
在调试过程中，出现 `Cannot set breakpoints: HW breakpoint all in use and SW breakpoint cannot write to memory` 的提示通常意味着两种情况： 1. **硬件断点资源耗尽**：某些处理器架构支持硬件断点，这些断点...
keil5的debug调试时出现This target device does not support all the define breakpoints! please redusce the number of breakpoints and start again
05-10
好的，我现在要解决用户在Keil5调试时遇到的“This target device does not support all the defined breakpoints”警告问题。用户已经知道需要减少断点数，但可能需要更具体的解决方案。首先，我需要回忆一下Keil...
vc++调试时出现One or more breakpoints cannot be set ......
CXCANDIS的专栏
10-29 995
转自http://blog.sina.com.cn/s/blog_3fb753380100gzlr.html   近来调程序的时候老碰到One or more breakpoints cannot be set ......，然后不能用断点调试，郁闷不只1次了，每次都花时间上网查，效率太低了。还是把有用的方法记录一下比较好。   方法一： project->setting->c/c++-
One or more breakpoints cannot be set and have been disabled
十年磨一剑，霜刃未曾试!
03-16 2731
<br />今天在写程序的时候，下了一个断点，然后调试运行，弹出这个错误<br />One or more breakpoints cannot be set and have been disabled<br /> <br />弄了半天才搞定。我的程序是Release模式的，Debug模式被不小心删了，不知道怎么加回去。<br /> <br />在Release下：<br />  将C/C++标签中的Category选择General,Optimizations选Disable (Debug),Debug
one or more breakpoints cannot be set and have been disabled
liulina603的专栏
09-02 1219
试了网上的多种方法，都无效 我的解决方法： 1、把之前添加的东西，再重新添加一遍，加一步调试下，看能否调试   网上的那几种方法，我都试了，还是不能调试，可能出错的情况不同吧
vc调试出现One or morebreakpoints cannot be set and have been disabled
嬴政
09-20 1573
现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled.   Execution will stopat the beginning of the program.解决方法在网上流传的大量文章都有提到过，如何处理这个问题，有的说是改设备，有的说是 删除ncb, .opt,.plg文件最后大量测试结果表明，只要把  debug这个目录和目录下面所有文件删除
于vc调试出现One or more breakpoints cannot be set and have been disabled
fangfang的专栏
06-10 2550
<br /> <br />转自:http://blog.csdn.net/train_z/archive/2008/04/30/2347649.aspx <br /> <br />现象是用 debug中的 step info或者run to cursor合着设置断点会出现One or morebreakpoints cannot be set and have been disabled. Execution will stopat the beginning of the program.<br />解决
one or morebreakpoints cannot be set and have been disabled解决方案
08-13 1562
1：vc调试会出现此问题，这是360拦截的缘故 2：解决方案 当然是关闭360
解决“One or more breakpoints cannot be set and have been disabled.…… ”
把梦想放飞在蓝色的天空里...
12-31 1613
文章出处：http://hi.baidu.com/ihoohi/blog/item/ca6d283988454aced5622502.html 今天，在VC6.0里面调试程序的时候，出现了下面这条警告：One or more breakpoints cannot be set and have been disabled.   Execution will stop at the beginni
vc不能debug，提示One or morebreakpoints cannot be set and have been disabled。。。。。
selfctrl的专栏
05-26 1331
<br />        vc调试时出现错误，提示One or morebreakpoints cannot be set and have been disabled。Execution will stopat the beginning of the program如下图：<br /><br />解决方法：<br />build->set active project configuration->选择xxxx win32 debug项<br /> <br />转：<br />一、两种调试方式：<br
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值