Very Simple Calculator

本文介绍了一个二进制表达式计算器的设计与实现,该计算器能够处理包括位运算在内的多种基本操作,例如移位、非、与、或、异或等。文章详细解释了如何通过去除前导零、对齐操作数等方式来确保正确执行运算。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

This problem doesn’t have a story. You just have to write a calculator which could perform simple binary operations. You will be given an expression and your program should calculate it’s result. Expression is formed according to this rules:
::= 0|1
::= |
:== not | shr | shl
:== xor | and | or
::= | |
::= |
Operation definitions:
not – binary negation operation (example: not 101 = 010)
shr – binary right shift operation (example: shr 101 = 10)
shl – binary left shift operation (example: shl 101 = 1010)
xor – binary exclusive or operation (example: 0111 xor 1011 = 1100) and – binary and operation (example: 0111 and 1011 = 0011)
or – binary or operation (example: 0111 or 1011 = 1111)
All unary operators have higher priority than binary ones and binary operators must be calculated from left to right (their priority is considered equal). Before any unary operation all additional leading zeros should be removed (for example 0011 becomes 11 and 000 becomes 0), and before a binary one you should align binary numbers by adding leading zeros if necessary (for example 11 xor 101 becomes 011 xor 101).

Input

The number of tests T (T ≤ 100) is given on the first line. Each of next T lines contains an expression itself. Length of the expression will be always less than 1000 characters.

Output

For each test case output a single line ‘Case T: N’. Where T is the test case number (starting from 1) and N is the value of evaluated expression in the same binary form. Answer should not contain any leading zeroes.

Sample Input

4
shl not 101
not 11 and 111
111 xor not 0
shl 0
Sample Output
Case 1: 100
Case 2: 0
Case 3: 110
Case 4: 0

题意:

(大)模拟

思路:

只有一个坑点,每次进行一级运算符之前要去掉前缀0,并且不能为空。

#include <iostream>
#include <string>
#include <map>
#include <vector>
#include <algorithm>
#include <stack>
#include <cstdio>
#include <cmath>
#include <cstring>
#include <set>
#include <queue>
#include <cstdlib>
using namespace std;
void NOT(string &str) {
    while (str[0] == '0') str.erase(str.begin());
    if (str.empty()) str += '0';
    for (int i = 0; i < str.size(); i++)
        if (str[i] == '1') str[i] = '0';
        else str[i] = '1';
}
void SHR(string &str) {
    while (str[0] == '0') str.erase(str.begin());
    if (str.empty()) str += '0';
    str.erase(str.end() - 1);
}
void SHL(string &str) {
    while (str[0] == '0') str.erase(str.begin());
    if (str.empty()) str += '0';
    str += '0';
}
string XOR(string str1, string str2) {
    while (str1.size() < str2.size()) str1.insert(0, 1, '0');
    while (str2.size() < str1.size()) str2.insert(0, 1, '0');
    string ans;
    for (int i = 0; i < str1.size() || i < str2.size(); i++) {
        if (str1[i] == str2[i]) ans += '0';
        else ans += '1';
    }
    while (ans[0] == '0') ans.erase(ans.begin());
    if (ans.empty()) ans += '0';
    return ans;
}
string AND(string str1, string str2) {
    while (str1.size() < str2.size()) str1.insert(0, 1, '0');
    while (str2.size() < str1.size()) str2.insert(0, 1, '0');
    string ans;
    for (int i = 0; i < str1.size() || i < str2.size(); i++) {
        if (str1[i] == '1' && str2[i] == '1') ans += '1';
        else ans += '0';
    }
    while (ans[0] == '0') ans.erase(ans.begin());
    if (ans.empty()) ans += '0';
    return ans;
}
string OR(string str1, string str2) {
    while (str1.size() < str2.size()) str1.insert(0, 1, '0');
    while (str2.size() < str1.size()) str2.insert(0, 1, '0');
    string ans;
    for (int i = 0; i < str1.size() || i < str2.size(); i++) {
        if (str1[i] == '1' || str2[i] == '1') ans += '1';
        else ans += '0';
    }
    while (ans[0] == '0') ans.erase(ans.begin());
    if (ans.empty()) ans += '0';
    return ans;
}
int main() {
    int T;
    cin >> T;
    getchar();
    for (int tt = 1; tt <= T; tt++) {
        string ans, text, tmp;
        stack <string> s;
        getline(cin, text);
        for (int i = 0; i < text.size(); ) {
            tmp.clear();
            while (text[i] != ' ' && i < text.size()) tmp += text[i++];
            if (i < text.size()) i++;
            if (tmp[0] == '1' || tmp[0] == '0') {
                while (!s.empty()) {
                    if (s.top() == "not") NOT(tmp);
                    else if (s.top() == "shl") SHL(tmp);
                    else if (s.top() == "shr") SHR(tmp);
                    else if (s.top() == "and") ans = AND(ans, tmp);
                    else if (s.top() == "xor") ans = XOR(ans, tmp);
                    else if (s.top() == "or") ans = OR(ans, tmp);
                    s.pop();
                }
                if (ans.empty()) ans = tmp;
            }
            else s.push(tmp);
        }
        while (!s.empty()) {
            if (s.top() == "not") NOT(tmp);
            else if (s.top() == "shl") SHL(tmp);
            else if (s.top() == "shr") SHR(tmp);
            else if (s.top() == "and") ans = AND(ans, tmp);
            else if (s.top() == "xor") ans = XOR(ans, tmp);
            else if (s.top() == "or") ans = OR(ans, tmp);
            s.pop();
        }
        while (ans[0] == '0') ans.erase(ans.begin());
        if (ans.empty()) ans += '0';
        cout << "Case " << tt << ": " << ans << endl;
    }
}
内容概要:本文档详细介绍了基于MATLAB实现多目标差分进化(MODE)算法进行无人机三维路径规划的项目实例。项目旨在提升无人机在复杂三维环境中路径规划的精度、实时性、多目标协调处理能力、障碍物避让能力和路径平滑性。通过引入多目标差分进化算法,项目解决了传统路径规划算法在动态环境和多目标优化中的不足,实现了路径长度、飞行安全距离、能耗等多个目标的协调优化。文档涵盖了环境建模、路径编码、多目标优化策略、障碍物检测与避让、路径平滑处理等关键技术模块,并提供了部分MATLAB代码示例。 适合人群:具备一定编程基础,对无人机路径规划和多目标优化算法感兴趣的科研人员、工程师和研究生。 使用场景及目标:①适用于无人机在军事侦察、环境监测、灾害救援、物流运输、城市管理等领域的三维路径规划;②通过多目标差分进化算法,优化路径长度、飞行安全距离、能耗等多目标,提升无人机任务执行效率和安全性;③解决动态环境变化、实时路径调整和复杂障碍物避让等问题。 其他说明:项目采用模块化设计,便于集成不同的优化目标和动态环境因素,支持后续算法升级与功能扩展。通过系统实现和仿真实验验证,项目不仅提升了理论研究的实用价值,还为无人机智能自主飞行提供了技术基础。文档提供了详细的代码示例,有助于读者深入理解和实践该项目。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值