RIP配置示例

配置RIP基本功能示例

• 组网需求
  一个小型网络要实现RouterA、B、C、D上实现网络互连。
  小型网络要考虑到扩展性能所以使用RIPv2

• 

• 操作步骤
  1.配置路由器接口IP地址
  RouterA

[Huawei]interface GigabitEthernet 0/0/0
[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.1 24 
[Huawei-GigabitEthernet0/0/0]quit
#RouterB、C、D配置一致

2.配置RIP基本功能（宣告直连网段）
RouterA

[Huawei]rip
[Huawei-rip-1]network 192.168.1.0
[Huawei-rip-1]quit

RouterB

[Huawei]rip
[Huawei-rip-1]net	
[Huawei-rip-1]network 192.168.1.0
[Huawei-rip-1]network 172.16.0.0   #因为RIPv1是有类网络，必须严格准守A、B、C这三类自然网络
[Huawei-rip-1]network 10.0.0.0
[Huawei-rip-1]quit

RouterC

[Huawei]rip
[Huawei-rip-1]network 172.16.0.0
[Huawei-rip-1]quit

RouterD

[Huawei]rip
[Huawei-rip-1]network 10.0.0.0
[Huawei-rip-1]quit

查看RouterA的RIP路由表

[Huawei]display rip 1 route 
 Route Flags : R - RIP
               A - Aging, G - Garbage-collect
 ----------------------------------------------------------------------------
 Peer 192.168.1.2 on GigabitEthernet0/0/0
      Destination/Mask        Nexthop     Cost   Tag     Flags   Sec
       172.16.0.0/16       192.168.1.2      1    0        RA      17
         10.0.0.0/8        192.168.1.2      1    0        RA      17

从路由表可以看出RIPv1发布的路由信息使用的是自然掩码

3.配置RIP的版本
RouterA

[Huawei]rip	
[Huawei-rip-1]version 2
[Huawei-rip-1]quit

RouterB

[Huawei]rip	
[Huawei-rip-1]version 2
[Huawei-rip-1]quit

RouterC

[Huawei]rip	
[Huawei-rip-1]version 2
[Huawei-rip-1]quit

RouterD

[Huawei]rip	
[Huawei-rip-1]version 2
[Huawei-rip-1]quit

在次查看RIP路由表信息

[Huawei]display rip 1 route 
 Route Flags : R - RIP
               A - Aging, G - Garbage-collect
 ---------------------