signature=fedb52cdaa1a8c0f80b11375a0fa940b,MacSphere: Physics at the Dirac point -- The optical cond...

本论文展示了多种材料的有限频率响应特性,如石墨烯的近场红外研究,高温超导铜氧化物的YRZ模型应用,以及Weyl半导体的磁性光谱。研究涉及Dirac准粒子行为,光学传导率计算,以及对电子散射和拓扑性质的影响。

Abstract:

In this thesis, we present the results for the finite frequency response of a variety of materials. These materials all share the common theme that their low energy excitations are Dirac-like. This coincidence was not by design, and highlights the now-ubiquitous nature of Dirac-quasiparticles in condensed matter physics. We present results for graphene, the high temperature superconducting cuprates, and Weyl semi metals. For graphene, our calculations revolve around a new experimental technique: Near field infrared spectroscopy. Conventionally it is ok to use the $\vec{q}\rightarrow 0$ limit when calculating the low energy optical response. This new technique is able to directly probe the finite $\vec{q}$ response by using an atomic force microscope tip as an antenna. We computed the optical conductivity of graphene at finite wavevector and studied how the quasiparticle peak is altered by disorder and the electron-phonon interaction. The calculations on the high $T_c$ cuprates use a model of the pseudogap phase known as the Yang, Rice and Zhang (YRZ) model. We employed the model to study the resistivity in the pseudogap regime, both in-plane and along the c-axis. We used a coherent tunneling matrix element to describe transport along the c-axis. We found that the model was able to reproduce the metaliclike behavior in the plane while being resistive out of plane. We then extended the model to the finite frequency response, as well as the superconducting phase. We found a pseduogap feature at finite frequency that was previously explained through an interlayer collective mode. We also found that microwave spectroscopy puts strong limits on the form of the scattering rate. Finally, we computed the optical response of Weyl semimetals subjected to an applied magnetic field. Weyl semimetals are a topological phase of matter that have yet to be observed. The form of the conductivity contains a series of asymmetric peaks, whose spacing is a signature of the underlying relativistic dispersion. These peaks remain robust, even with moderate disorder.

<think>我们面对的是一个AndroidMediaRecorder在stop操作时引发的崩溃问题。根据用户提供的日志片段,我们需要分析崩溃原因并提供解决方案。以下是对日志的逐行注释和问题分析:###日志分析1.**崩溃堆栈关键行**```logFATALEXCEPTION:mainProcess:com.example.cameratest,PID:14519java.lang.RuntimeException:stopfailed.atandroid.media.MediaRecorder.stop(NativeMethod)atcom.example.cameratest.MainActivity.stopRecording(MainActivity.java:145)```-**`FATALEXCEPTION`**:致命错误,导致应用崩溃。-**`MediaRecorder.stop(NativeMethod)`**:崩溃发生在`stop()`的JNI层,表明底层媒体服务处理失败。-**`MainActivity.java:145`**:用户代码中调用`stop()`的位置。2.**前置操作日志**```log[ItsService]Startprocessingcommand:doStaticPreviewRecordingTurnedOFFvideostabilization.ois=false```-**`doStaticPreviewRecording`**:当前执行的是静态预览录制命令。-视频稳定功能被显式关闭(`ois=false`),可能与问题无关。###崩溃原因推断1.**状态机违规**MediaRecorder状态机要求`stop()`必须在`start()`之后且未释放的状态下调用。可能原因:-重复调用`stop()`(如点击停止按钮多次)。-在`start()`未完成时调用`stop()`(异步启动未完成)。2.**资源冲突**-输出文件路径无效(如SD卡权限不足或路径不存在)[^2][^4]。-硬件资源被抢占(如摄像头被其他进程占用)。3.**编码器超时**当录制时间过短(<100ms)时,底层编码器可能无法完成初始化,导致`stop()`崩溃。###解决方案####1.检查状态机顺序```java//正确调用顺序示例mediaRecorder.start();//必须在start之后才能stop//...等待录制至少1...mediaRecorder.stop();//调用前检查状态//避免重复调用if(isRecording){mediaRecorder.stop();isRecording=false;//更新状态标志}```####2.验证文件权限和路径```java//使用Context.getExternalFilesDir()避免权限问题FileoutputDir=getExternalFilesDir(Environment.DIRECTORY_MOVIES);FileoutputFile=newFile(outputDir,"test.mp4");//Android10+需添加ScopedStorage支持mediaRecorder.setOutputFile(outputFile.getAbsolutePath());```####3.添加延迟保护```java//确保录制时长足够handler.postDelayed(()->{if(isRecording){mediaRecorder.stop();}},1000);//至少1秒后停止```####4.异常捕获强化```javatry{mediaRecorder.stop();}catch(IllegalStateExceptione){Log.e(TAG,"stop()calledininvalidstate:"+e.getMessage());//释放资源并重置MediaRecorderresetMediaRecorder();}```###预防措施|措施|实现方式||---------------------|-------------------------------------------------------------------------||**状态标志位**|设置`booleanisRecording`同步UI操作与MediaRecorder状态。||**生命周期同步**|在`onPause()`中自动停止录制并释放资源。||**异步操作保护**|使用`postDelayed`确保`start()`完成后再允许`stop()`调用。||**日志增强**|在关键操作前后添加Log输出(如`Log.i(TAG,"start()calledat:"+System.currentTimeMillis())`)。|>**关键点**:MediaRecorder状态机严格性要求开发者必须显式管理生命周期。根据Android文档,`stop()`在以下状态会崩溃:>-未调用`start()`(状态错误)>-已调用`release()`(资源已释放)>-编码器初始化失败(底层错误)§§相关问题§§1.MediaRecorder状态机包含哪些具体状态?2.如何检测摄像头硬件是否被其他应用占用?3.ScopedStorage如何影响媒体文件存储路径?4.MediaRecorder的`reset()`和`release()`方法有何区别?[^1]:状态机错误是MediaRecorder崩溃的最常见原因。[^2]:WRITE_EXTERNAL_STORAGE权限在Android10+需替换为ScopedStorage。[^3]:硬件冲突可通过CameraManager.getCameraCharacteristics()检测。[^4]:输出文件路径必须应用可访问且具有写权限。</think>### Android MediaRecorder崩溃日志分析 #### 日志关键行解析 1. **崩溃源头定位** ```log FATAL EXCEPTION: main Process: com.example.cameratest, PID: 14519 java.lang.RuntimeException: stop failed. at android.media.MediaRecorder.stop(Native Method) at com.example.cameratest.MainActivity.stopRecording(MainActivity.java:145) ``` - **`FATAL EXCEPTION`**:致命错误导致应用崩溃 - **`MediaRecorder.stop(Native Method)`**:崩溃发生在原生层`stop()`方法,表明底层媒体服务处理失败 - **`MainActivity.java:145`**:用户代码中调用`stop()`的位置,需检查此处逻辑[^3] 2. **前置操作日志** ```log [ItsService] Start processing command: doStaticPreviewRecording Turned OFF video stabilization. ois = false ``` - **`doStaticPreviewRecording`**:当前执行的是静态预览录制命令 - **稳定功能关闭**:视频稳定(OIS/EIS)被显式禁用,非崩溃直接原因 #### 崩溃原因分析 1. **状态机违规(最常见原因)** - MediaRecorder生命周期要求严格顺序: ```mermaid graph LR A[初始化] --> B[配置参数] B --> C[prepare] C --> D[start] D --> E[stop] <!-- 必须在start之后 --> E --> F[release] ``` - 可能错误场景: - 未调用`start()`直接调用`stop()` - 重复调用`stop()`(按钮多次点击) - 在`release()`后调用`stop()` 2. **资源冲突** - 摄像头硬件被抢占(前序`getSupportedPreviewSizes`未释放资源) - 文件写入冲突(SD卡权限或路径问题)[^2][^4] - 音频硬件占用(DAC输出资源争抢)[^5] 3. **编码器超时** - 当录制时间过短(<100ms)时,底层编码器可能未完成初始化: ```java // 错误示例:立即停止 mediaRecorder.start(); mediaRecorder.stop(); // 崩溃风险! ``` #### 解决方案 ##### 1. 强化状态管理 ```java // 添加状态标志位 private boolean isRecording = false; public void startRecording() { if (!isRecording) { mediaRecorder.start(); isRecording = true; } } public void stopRecording() { if (isRecording) { try { mediaRecorder.stop(); // 仅在录制状态调用 } catch (IllegalStateException e) { Log.e("Recorder", "安全停止失败: " + e.getMessage()); } isRecording = false; } } ``` ##### 2. 异步操作保护 ```java // 添加延迟停止机制 new Handler().postDelayed(() -> { if (mediaRecorder != null && isRecording) { mediaRecorder.stop(); } }, 1000); // 确保录制持续至少1秒 ``` ##### 3. 文件路径验证 ```java // 使用Context提供的安全路径 File outputDir = getExternalFilesDir(Environment.DIRECTORY_MOVIES); File outputFile = new File(outputDir, "recording.mp4"); mediaRecorder.setOutputFile(outputFile.getAbsolutePath()); ``` ##### 4. 异常捕获增强 ```java try { mediaRecorder.stop(); } catch (RuntimeException e) { // 处理特定错误码 if (e.getMessage().contains("stop failed")) { mediaRecorder.reset(); // 重置状态机 mediaRecorder.release(); initRecorder(); // 重新初始化 } } ``` #### 预防措施表 | 措施 | 实现方式 | |---------------------|-------------------------------------------------------------------------| | **状态标志位** | 使用`boolean isRecording`同步UI操作与MediaRecorder状态 | | **生命周期绑定** | 在`onPause()`中自动停止录制并释放资源 | | **硬件检测** | 调用前检查`CameraManager.getCameraCharacteristics()`确认摄像头可用性 | | **权限动态验证** | Android 6.0+使用`ActivityCompat.checkSelfPermission()`[^2] | > **关键提示**:根据Android文档,MediaRecorder的`stop()`方法在以下状态会抛出异常: > - 未调用`start()` > - 录制时间过短(<1秒) > - 释放后重复调用 > 这些场景必须通过状态机严格避免[^1][^3]
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符  | 博主筛选后可见
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值