关于 Are you sure that IP Virtual Server is built in the kernel or as module?

最新推荐文章于 2021-11-20 15:46:36 发布

weixin_40652276

最新推荐文章于 2021-11-20 15:46:36 发布

阅读量659

点赞数

文章标签： docker linux centos

本文链接：https://blog.youkuaiyun.com/weixin_40652276/article/details/107465491

版权

Are you sure that IP Virtual Server is built in the kernel or as module?

在docker 镜像中跑lvs时会有这个提示，找遍了百度都没找到答案，直到我想运行systemctl时提示我：Failed to get D-Bus connection: Operation not permitted

原因是docker run 的时候后面没有跟 /usr/sbin/init 服务，然后惊讶的发现我lvs也能起来了。。。。。。

确定要放弃本次机会？

福利倒计时

: :

立减 ¥

普通VIP年卡可用

立即使用

weixin_40652276

关注关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
分享

复制链接

分享到 QQ

分享到新浪微博

扫一扫
举报

举报

Orin NX平台LCD驱动调试记录

jzwjzw19900922的博客

02-14

216

EndSectionEndSection结果是我在液晶显示器上看到一个非常闪烁的屏幕。是因为坏的EDID二进制文件吗？还是我在构型中遗漏了什么？不考虑闪烁的屏幕，监视器检测工作正常吗？NO因为Xorg.0.log[ 42.853]!?) unknown.built-ins即使我在xorg.conf中添加了edid，也无法创建/dev/fb0。

书生·浦语大模型实战营之XTuner多模态训练与测试

段智华的博客

04-16

325

书生·浦语大模型实战营之XTuner多模态训练与测试在本节课中，我们将学习使用XTuner微调多模态LLM的内容，本部分需要的GPU资源为24GB 30% 的 A100。这是学完本节内容后的多模态LLM性能效果展示：Haotian Liu等使用GPT-4V对图像数据生成描述，以此构建出大量 – 的数据对。利用这些数据对，配合文本单模态LLM，训练出一个Image Projector。所使用的文本单模型LLM和训练出来的Image Projector，统称为LLaVA模型 LLaVA: Large Lang

参与评论您还未登录，请先登录后发表或查看评论

django在做数据库映射时候报错 migration 报错couldnot import django. are you sure it is installed

hzp666的博客

09-08

412

django在做数据库映射时候报错 migration 报错couldnot import django. are you sure it is installed 原因：django 的环境变量可能没有加载到Path里边解决方法：加载环境变量方法没试，但是下边这个发放可以的；在Pycharm里 Ctrl+Alt+R 在下面shell里输入 runserver 会看到 ...

docker搭建高可用与负载均衡（一）lvs+keepalived+nginx+apache

rainyrainbow的博客

06-27

7347

1.需求分析网站建设是企业、组织、个人宣传和分享交流的重要的平台，尤其是在如今的信息化时代下，所有行业都在互联网的影响下实现数字化、在线化。在网站的建设中，网站的部署和发布是非常重要的一环，尤其是企业网站，随着企业的影响力和业务规模的扩大，企业的服务器需要承载的访问量和负载也日益增多，这就对企业提供网络服务提出了新的标准。因此，为使得企业网络可以承载更多的访问量和业务需求，我们就需要搭建web集...

执行 ipvsadm 命令时，报错

FresherHe的博客

04-18

2201

执行 ipvsadm 命令时，报错： Can't initialize ipvs: No space left on device Are you sure that IP Virtual Server is built in the kernel or as module? 产生原因：咋一看，很容易被错误信息带偏。其实是没有权限的问题。解决方案：在命令前，添加 sudo ...

Docker笔记三：基于LVS DR模式构建WEB服务集群

zdy0_2004的专栏

12-18

529

http://www.cnblogs.com/XiongMaoMengNan/p/8056211.html 安装ipvsadm 1. 先在宿主机上安装并以root来启动ipvsadm，每次要在容器中运行ipvs都需要先在宿主机上启动ipvsadm。如果直接进行2步操作将报出如下错误： Can't initialize ipvs: Protocol not avai

CentOS Docker容器中安装LVS负载均衡(一) ipvsadm

sgiwxyg的专栏

03-29

4174

安装环境： Docker容器和宿主机都是CentOS 7.3版本 1. Docker容器内安装ipvsadm yum install -y ipvsadm # enable IP forward echo 'net.ipv4.ip_forward = 1' >> /etc/sysctl.conf sysctl -p touch /etc/sysconfig/ipvsadm s

解决FATAL: Error inserting ip_vs ... Unknown symbol in module, or unknown parameter

weixin_34010566的博客

08-19

792

在使用yuminstallipvsadm-y安装lvs管理工具后,发现指令ipvsadm相关指令一直报错:FATAL:Errorinsertingip_vs(/lib/modules/2.6.32-358.18.1.el6.x86_64/kernel/net/netfilter/ipvs/ip_vs.ko):Unknownsymbolinmodule,...

Windows Server 2003 (NT 5.2.3790.0) build guide Version 10b, last updated 2021/10/21

yanghouhan的博客

11-20

3061

Windows Server 2003 (NT 5.2.3790.0) build guide Version 10b, last updated 2021/10/21 XP-Tan Instructions tested under XP SP3 x86, Win7 SP1 x86/x64 & Win10 x64, results may vary under other operating systems. Guide maintained by a nameless anon with no

LVS 负载均衡服务器安装配置

weixin_33711641的博客

03-21

206

Linxu ENT AS 4 2.6.9-5.ELsmpip10.1.1.1 ip192.168.1.1 Realserver1 : 192.168.1.226 2 : 192.168.1.2 ipvsadm http://www.linuxvirtualserver.org/software ln -s /usr/src/kernels/2.6.9-5....

Linux kernel启动参数

魔戒

12-26

1571

转自：http://smilejay.com/2011/10/kernel_parameters/ 在Linux中，给kernel传递参数以控制其行为总共有三种方法： 1.build kernel之时的各个configuration选项。 2.当kernel启动之时，可以参数在kernel被GRUB或LILO等启动程序调用之时传递给kernel。 3.在kernel运行时，

Nagios常见问题记录（2）

weixin_34256074的博客

08-01

206

1、时间同步安装Nagios后，有3个检查时间同步的插件，根据不同的检测目标，使用不同的插件：check_ntp：已过时，最好不要再使用；check_ntp_peer：用于检查ntp服务器的健康状况。check_ntp_time：用于检查指定的服务器与ntp服务器之间的时间差。2、如何监控LVS的状态如果要监测LVS（Linux Virtual Server）服务的状态是否正...

ipvsadm服务启动失败，报错control process exited with error code

小乔只会写bug的博客

05-29

865

1、启动ipvsadm服务报错： 2、通过状态查询，发现缺少文件 3、先配好集群，再执行以下命令 4、再重新启动，启动成功

ipvsadm的参数

weixin_30952535的博客

04-27

111

ipvsadm的参数----------调度方法-s rr ---------- 循环-s wrr ----------带权循环-s lc ----------最小连接-s wlc ---------- 带权最小连接-s lblc --------...

r530-8i raid1

最新发布

01-08

### Dell R530 Server with PERC H810 or H830 Controller Setup RAID 1 Configuration Guide #### Preparation Before Setting Up RAID 1 Before configuring RAID 1 on a Dell R530 server using the PERC H810 or H830 controller, ensure that all necessary hardware components are properly installed and connected. Verify BIOS settings to allow booting from the intended storage device. #### Entering RAID Configuration Utility To enter the RAID configuration utility during system startup, press `Ctrl+R` when prompted after restarting the server[^1]. This action will bring up the RAID configuration interface where various operations can be performed including creating new RAID arrays like RAID 1. #### Creating RAID 1 Array Once inside the RAID configuration menu: - Select two physical disks of equal size. - Choose "Create Virtual Disk". - Specify RAID level as RAID 1 (mirroring). - Confirm selections; this process may vary slightly depending upon specific versions but generally follows these steps closely[^5]. After setting up RAID 1 successfully, initialization might start automatically or require manual initiation by selecting an option similar to “Initialization” followed by confirming it through actions such as pressing F2 key then choosing star init command which starts initializing newly created RAID volume. #### Verifying Installation Upon completion of RAID creation and initialization processes, verify installation correctness via checking within operating systems’ disk management tools ensuring mirrored volumes appear correctly without errors present. For Linux distributions specifically, make sure kernel includes support for relevant RAID controllers found under directory path linux-\drivers\scsi\megaraid containing driver source codes along with Kconfig files listing supported models[^3]. ```bash lsmod | grep megaraid_sas ``` This command checks whether the required module is loaded into memory indicating proper recognition at OS-level. #### Best Practices Post-Configuration Maintain regular backups even though data redundancy exists due to mirroring nature provided by RAID 1 setup. Monitor health status periodically utilizing built-in utilities offered either directly from manufacturer software suites or third-party monitoring applications designed explicitly towards managing enterprise-grade storages efficiently over extended periods reliably safeguarding critical business information assets effectively against potential failures while maintaining optimal performance levels throughout operational lifecycles continuously. --related questions-- 1. How does one check if the correct drivers for PERC H810/H830 are included in custom-built kernels? 2. What precautions should be taken before performing any changes related to RAID configurations on production servers? 3. Can you provide detailed instructions on how to monitor RAID array statuses post-setup? 4. Is there any difference between setting up RAID 1 on older versus newer generations of Dell PowerEdge series servers? 5. In what scenarios would switching existing non-redundant setups to RAID 1 offer significant advantages?