Linux系统内存文件,linux支持的内存根文件系统

linux支持两种内存根文件系统：ramdisk和initramfs。

----------------------------------------------------------------------------------------------------

Document/early-userspace/README

128 The kernel has currently 3 ways to mount the root filesystem:

129

130 a) all required device and filesystem drivers compiled into the kernel, no

131    initrd.  init/main.c:init() will call prepare_namespace() to mount the

132    final root filesystem, based on the root= option and optional init= to run

133    some other init binary than listed at the end of init/main.c:init().

134

135 b) some device and filesystem drivers built as modules and stored in an

136    initrd.  The initrd must contain a binary '/linuxrc' which is supposed to

137    load these driver modules.  It is also possible to mount the final root

138    filesystem via linuxrc and use the pivot_root syscall.  The initrd is

139    mounted and executed via prepare_namespace().

140

141 c) using initramfs.  The call to prepare_namespace() must be skipped.

142    This means that a binary must do all the work.  Said binary can be stored

143    into initramfs either via modifying usr/gen_init_cpio.c or via the new

144    initrd format, an cpio archive.  It must be called "/init".  This binary

145    is responsible to do all the things prepare_namespace() would do.

146

147    To maintain backwards compatibility, the /init binary will only run if it

148    comes via an initramfs cpio archive.  If this is not the case,

149    init/main.c:init() will run prepare_namespace() to mount the final root

150    and exec one of the predefined init binaries.

------------------------------------------------------------------------------------------------

initramfs

initramfs可以直接嵌入linux内核中，同内核一起编译。它可以为压缩文件，也可为普通非压缩文件系统。

其位置通过CONFIG_INITRAMFS_SOURCE指定。

注：若指定了CONFIG_INITRAMFS_SOURCE，则系统不会再响应ramdisk，jffs2等根文件系统，

不响应CONFIG_CMDLINE，即使INITRAMFS_SOURCE指定的目录为空或非正确的文件系统。

initramfs文件系统启动时，会在根文件系统中执行第一个init程序，对uboot中穿过来的

init=/linuxrc不予理睬。

注：不管linuxrc，还是init，都是符号链接，指向/bin/busybox.