惠普电脑远程软件服务器,惠普服务器远程控制

HP自己封装了一个iLO，底层还是ipmi，iLO2在linux只有fence命令支持，或者用web界面！

安装fence和cman软件包，光盘里没有，我整理了下rpm做了个源

# cat > /etc/yum.repos.d/fence.repo << _Longgeek_

[fence]

name=Fence Repo

baseurl=http://download.longgeek.com/Cman_Fence/

gpgcheck=0

_Longgeek_

安装fence-agents和cman

# yum -y install fence* cman

# fence_ilo -h

Usage:

fence_ilo [options]

Options:

-o, --action= Action: status, reboot (default), off or on

-a, --ip= IP address or hostname of fencing device

-l, --username= Login name

-p, --password= Login password or passphrase

-S, --password-script= Script to run to retrieve password

-z, --ssl Use ssl connection

-r, --ribcl-version= Force ribcl version to use

-4, --inet4-only Forces agent to use IPv4 addresses only

-6, --inet6-only Forces agent to use IPv6 addresses only

-u, --ipport= TCP port to use

-v, --verbose Verbose mode

-D, --debug-file= Debugging to output file

-V, --version Output version information and exit

-h, --help Display this help and exit

--power-timeout Test X seconds for status change after ON/OFF

--shell-timeout Wait X seconds for cmd prompt after issuing command

--login-timeout Wait X seconds for cmd prompt after login

--power-wait Wait X seconds after issuing ON/OFF

--delay Wait X seconds before fencing is started

--retry-on Count of attempts to retry power on

控制开关机

# fence_ilo -a 172.16.0.221 -l Administrator -p FW2363V8 -o reboot 重启(默认)

fence_ilo -a 172.16.0.221 -l Administrator -p FW2363V8 -o off 关机

fence_ilo -a 172.16.0.221 -l Administrator -p FW2363V8 -o on 开机

在cobbler中也支持iLO，看了下官方的wiki，基本上所有的都支持。

配置让cobbler能管理节点的电源

# cobbler system edit --name www.longgeek.com --power-type=ilo --power-address=172.16.0.221 --power-user Administrator --power-pass FW2363V8

# cobbler system poweroff --name www.longgeek.com

# cobbler system poweron --name www.longgeek.com

# cobbler system reboot --name www.longgeek.com

看了一下cobbler的官方wiki，有个�Cnetboot-enabled选项，机器第一启动项是网络启动的情况下，只要pxe完操作系统，重启的时候加载cfg文件网络引导改成本地硬盘启动，这样就避免了反复的pxe。

# cobbler system edit --name www.longgeek.com --netboot-enabled=1

# cobbler sync