linux lighttpd,linux下lighttpd服务器的详细安装步骤 以及对flv流媒体的支持配置

准备条件:

a,创建/usr/local/lighttpd目录,用于安装lighttpd

b,创建lighttpd用户密码为lighttpd账号,用于lighttpd的启动用户

1,首先去官网http://www.lighttpd.net/下载对应的安装文件(目前最新1.4.35)。

wget http://download.lighttpd.net/lighttpd/releases-1.4.x/lighttpd-1.4.35.tar.gz

2,解压安装包 lighttpd-1.4.35.tar.gz

[[email protected] lighttpd]# tar -zxvf lighttpd-1.4.35

3,编译lighttpd安装文件

[[email protected] lighttpd-1.4.35]# cd lighttpd-1.4.35

[[email protected] lighttpd-1.4.35]# ./configure --prefix=/usr/local/lighttpd

[[email protected] lighttpd-1.4.35]# make

[[email protected] lighttpd-1.4.35]# make install

4,创建www目录,用于存放html等文件

[[email protected] lighttpd-1.4.35]# mkdir -p /srv/www/htdocs/

5,复制配置文件到etc目录命令如下

[[email protected] lighttpd]# cp - p /data/lighttpd/lighttpd-1.4.35/doc/config/conf.d /usr/local/lighttpd/etc

6,创建日志输出目录

[[email protected] lighttpd]# mkdir - p /var/log/lighttpd

7,修改启动关闭重启配置

cp doc/initscripts/rc.lighttpd.redhat /etc/init.d/lighttpd8,然后修改/etc/init.d/lighttpd，把

lighttpd="/usr/sbin/lighttpd"

改为

lighttpd="/usr/local/lighttpd/sbin/lighttpd"

9,进入目录/usr/local/lighttpd/etc，修改lighttpd.conf的var.log_root的值为"/var/log/lighttpd"

10,修改lighttpd的ip端口信息

server.port = 8080

##

## Use IPv6?

##

server.use-ipv6 = "disable"

##

## bind to a specific IP

##

server.bind = "192.168.10.1"

11,修改 modules.conf文件,用来支持flv伪流模,改后如下

server.modules = (

"mod_access",

# "mod_alias",

# "mod_auth",

# "mod_evasive",

"mod_redirect",

"mod_rewrite",

"mod_secdownload",

"mod_flv_streaming",

# "mod_setenv",

# "mod_usertrack",

)

flv-streaming.extensions = ( ".flv" )12,修改属主为:lighttpd:lighttpd

chrown -R lighttpd:lighttpd /usr/local/lighttpd

chrown -R lighttpd:lighttpd //srv/www/htdocs

chrown -R lighttpd:lighttpd //var/log/lighttpd

13,启动lighttpd,看到下面的输出即成功[[email protected] etc]# service lighttpd start

Starting lighttpd:

原文：http://blog.youkuaiyun.com/joeyon1985/article/details/39961887