Layout_check

本文详细介绍了PCB设计的各个步骤,包括单位设置、DXF导入、叠层配置、布局、布线规则、过孔与焊盘设计、电源与地平面处理,以及DRC检查等关键要点,旨在提升PCB设计的效率与质量。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

1、导入DXF前需要将EE内的单位设置与结构框图的一致,一般DXF中默认为mm ,所以需要将EE也设置为mm:
EE 软件: setup/set Parameters/Gerneral/Display units :Design units为Milimeters,其下方Vp设置为Meters/s
并且在导入DXF时注意将显示的单位Units选成和EE一致的:in/mm

2、DXF的Cell name自定义,颜色统一选择;按下Ctrl键选中板框的2D line,双击可再原地复制,拖动可移动复制

3、EE中;选中某一对象,按住右键画倒“L”,即可调出对象的属性;反向画倒“U”即可撤销

4、Edit Contrl/Grids: 单位为mm
parts Grids根据元件PIN脚数14PIN以上设置为 1 ,14PIN以下设为 .1
Route Grids:钻孔via设为.1(最好为栅格点的倍数)
Other GridsL: 设置为.5
若单位为th一般保持默认即可
plow 设置保持默认
Trace& Via edit:关闭推挤过孔的选项,不勾选 “Via shoving”;
gloss mode 选择“on”
advanced gloss optons:选择1,4 两项
Gerneral options:勾选2,3 选项,1,4关闭,以便于后期进行手动修线

5、叠层设置:1)Setup/set Parameters/Gerneral 里先填好层数,然后单击【Remap Layers】 弹出对话框,可以重新调整叠层位置;
2)Setup/set Parameters/Layer Stackup中设置叠层结构:介质层和铜箔的厚度
3)Plane/ Plane assignments 设置每层的属性:布线层 or 内电层
单击plane的前图标“。。。”,弹出”Nets”的标签页,在exclude选择中给Plane平面层分配电源或地网络
设置好Plane 之后,后方的有一个圆点,标识当前用户想使用板框作为该属性铜皮的边界,勾选及可。
pla

<androidx.constraintlayout.widget.ConstraintLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:background="@drawable/round_style" android:elevation="4dp" android:layout_margin="8dp" android:padding="10dp"> <com.xuexiang.xui.widget.textview.autofit.AutoFitTextView style="@style/item_show_title" android:id="@+id/spec" android:paddingTop="2dp" app:layout_constraintStart_toStartOf="parent" app:layout_constraintTop_toTopOf="parent"/> <com.xuexiang.xui.widget.textview.autofit.AutoFitTextView style="@style/item_show_title" android:id="@+id/style" app:layout_constraintStart_toEndOf="@+id/spec" app:layout_constraintTop_toTopOf="parent"/> <com.xuexiang.xui.widget.textview.autofit.AutoFitTextView style="@style/item_show_title" android:id="@+id/name" app:layout_constraintStart_toStartOf="parent" app:layout_constraintTop_toBottomOf="@+id/spec"/> <com.xuexiang.xui.widget.textview.autofit.AutoFitTextView style="@style/item_show_title" android:id="@+id/real_inventory" app:layout_constraintStart_toStartOf="parent" app:layout_constraintTop_toBottomOf="@+id/name"/> <com.xuexiang.xui.widget.textview.autofit.AutoFitTextView style="@style/item_show_title" android:id="@+id/check_inventory" app:layout_constraintStart_toEndOf="@+id/real_inventory" app:layout_constraintTop_toBottomOf="@+id/name"/> <ImageView android:id="@+id/status" android:layout_width="wrap_content" android:layout_height="wrap_content" app:layout_constraintEnd_toEndOf="parent" app:layout_constraintTop_toBottomOf="@+id/name" app:layout_constraintTop_toTopOf="parent" /> <View style="@style/item_show" android:id="@+id/view_task_list" android:layout_width="match_parent" android:layout_height="1dp" android:background="#cccccc" android:layout_marginTop="3dp" app:layout_constraintEnd_toEndOf="parent" app:layout_constraintTop_toBottomOf="@+id/real_inventory" app:layout_constraintStart_toStartOf="@+id/real_inventory"/> </androidx.constraintlayout.widget.ConstraintLayout>加入button功能,但并不影响源码
06-03
<?xml version="1.0" encoding="utf-8"?> <layout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:app="http://schemas.android.com/apk/res-auto" xmlns:tools="http://schemas.android.com/tools"> <data> <variable name="model" type="com.fshr.app.bean.sms.MyJobApplyBean" /> <import type="com.fshr.baseproject.utils.ConfigData" /> </data> <androidx.cardview.widget.CardView android:id="@+id/parent" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_margin="8dp" app:cardCornerRadius="12dp" app:cardElevation="2dp"> <!-- Reduced elevation for a flatter look --> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:orientation="vertical" android:padding="16dp"> <!-- Increased padding --> <!-- Application ID --> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="申请表ID:" android:textColor="@color/grey_600" <!-- Lighter gray --> android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{model.id}" android:textColor="@color/black" android:textSize="16sp" android:textStyle="bold" /> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:background="@drawable/rounded_corner_reason_bg" android:gravity="center" android:paddingHorizontal="8dp" android:paddingVertical="4dp" android:text="@{ConfigData.INSTANCE.getParamLabel(ConfigData.INSTANCE.busi_work_appliacnt_status,model.applicationStatus,`待提交`)}" app:txColor="@{ConfigData.INSTANCE.getParamColor(ConfigData.INSTANCE.busi_work_appliacnt_status,model.applicationStatus)}" tools:text="Type" /> </LinearLayout> <!-- Applicant Information --> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" <!-- Increased spacing --> android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="关联作业项目:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{model.project.projectName}" android:textColor="@color/black" android:textSize="16sp" /> </LinearLayout> <!-- Receiver Information --> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="申请编号:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{model.project.operationNo}" android:textColor="@color/black" android:textSize="16sp" /> </LinearLayout> <!-- Expected Access Time --> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="是否提级审批:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{ConfigData.INSTANCE.getParamLabel(ConfigData.INSTANCE.busi_common_yes_no,model.isHighLevel)}" android:textColor="@color/black" android:textSize="16sp" /> </LinearLayout> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="是否有危险源辨识和风险评价表:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{ConfigData.INSTANCE.getParamLabel(ConfigData.INSTANCE.busi_common_yes_no,model.isHazard)}" android:textColor="@color/black" android:textSize="16sp" /> </LinearLayout> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:text="是否有作业方案及评审情况:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:text="@{ConfigData.INSTANCE.getParamLabel(ConfigData.INSTANCE.busi_common_yes_no,model.isWorkPlan)}" android:textColor="@color/black" android:textSize="16sp" /> </LinearLayout> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:text="其他安全防护措施:" android:textColor="@color/grey_600" android:textSize="14sp" /> <TextView android:layout_width="match_parent" android:layout_height="wrap_content" android:padding="10dp" android:layout_marginTop="8dp" android:background="@drawable/rounded_corner_reason_bg" android:text="@{model.otherSafe }" android:textColor="@color/black" android:textSize="16sp" /> <LinearLayout android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="12dp" android:gravity="center_vertical" android:orientation="horizontal"> <TextView android:layout_width="wrap_content" android:layout_height="wrap_content" android:id="@+id/text_risk" android:layout_marginStart="8dp" android:text="管理危险辨识与风险评价" android:textColor="@color/blue" android:textSize="16sp" /> <TextView android:id="@+id/text_scheme" android:layout_width="0dp" android:layout_height="wrap_content" android:layout_marginStart="8dp" android:layout_weight="1" android:gravity="right" android:visibility="@{model.isWorkPlan().equals(`1`)}" android:text="管理作业方案" android:textColor="@color/blue" android:textSize="16sp" /> </LinearLayout> <LinearLayout android:id="@+id/lin_btn" android:layout_width="match_parent" android:layout_height="wrap_content" android:layout_marginTop="16dp" android:orientation="horizontal" android:visibility="@{!ConfigData.INSTANCE.jobJsUpdate(model.applicationStatus)}"> <Button android:id="@+id/btn_appover" android:layout_width="0dp" android:layout_height="40dp" android:layout_weight="1" android:background="@drawable/button_approve_background" android:stateListAnimator="@null" android:text="修改" android:textColor="@color/white" android:textSize="16sp" /> <Button android:id="@+id/btn_reject" android:layout_width="0dp" android:layout_height="40dp" android:layout_marginStart="16dp" android:layout_weight="1" android:background="@drawable/button_reject_background" android:stateListAnimator="@null" android:text="删除" android:textColor="@color/white" android:textSize="16sp" /> </LinearLayout> </LinearLayout> </androidx.cardview.widget.CardView> </layout> 从美观上帮我重新设计下排版,要求输入完整内容
最新发布
07-11
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值