Android 交叉编译模板

最新推荐文章于 2024-12-12 17:47:43 发布

weixin_35867652

最新推荐文章于 2024-12-12 17:47:43 发布

阅读量211

点赞数

本文链接：https://blog.youkuaiyun.com/weixin_35867652/article/details/107564697

版权

本文详细介绍了使用安卓NDK进行交叉编译的过程，包括配置环境变量、编译openssl和libiconv库，以及安装和配置mariadb-native-client等步骤。提供了具体的命令行操作示例，适用于安卓应用开发中涉及C/C++组件的开发者。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

SR=/home/song/android/android-ndk-r14b/platforms/android-19/arch-arm
BR=/home/song/android/android-ndk-r14b/toolchains/arm-linux-androideabi-4.9/prebuilt/linux-x86_64/bin/arm-linux-androideabi-
cd openssl-1.0.1e/
RANLIB="$BR"ranlib CC="$BR"gcc ./Configure android-armv7 --prefix=$SR/usr
ANDROID_DEV=$SR/usr make
make install	
make install_sw

cd ..
cd libiconv-1.14/
gedit srclib/stdio.in.h 

//_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
 #if defined(__GLIBC__) && !defined(__UCLIBC__) && !__GLIBC_PREREQ(2, 16)
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
 #endif

STRIP="$BR"strip RANLIB="$BR"ranlib OBJDUMP="$BR"objdump AR="$BR"ar CC="$BR"gcc CFLAGS=--sysroot=$SR CPP="$BR"cpp CPPFLAGS=$CFLAGS ./configure --build=x86_64 --host=arm --prefix=$SR/usr --with-sysroot=$SR && make install

sudo apt install bzr
bzr branch lp:mariadb-native-client

#ADD_SUBDIRECTORY(unittest/libmariadb)
mkdir build && cd build
PKG_CONFIG_PATH=$SR/usr/lib/pkgconfig cmake -DCMAKE_AR="$BR"ar -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER="$BR"gcc -DCMAKE_C_FLAGS=--sysroot=$SR -DCMAKE_INSTALL_PREFIX=$SR/usr -DCMAKE_LINKER="$BR"ld -DCMAKE_NM="$BR"nm -DCMAKE_OBJCOPY="$BR"objcopy -DCMAKE_OBJDUMP="$BR"objdump -DCMAKE_RANLIB="$BR"ranlib -DCMAKE_STRIP="$BR"strip -DWITH_EXTERNAL_ZLIB=ON -DICONV_INCLUDE_DIR=$SR/usr/include -DICONV_LIBRARIES=$SR/usr/lib/libiconv.a -DZLIB_INCLUDE_DIR=$SR/usr/include -DZLIB_LIBRARY=$SR/usr/lib/libz.so ../