ssg20 虚拟服务器,SSG20硬件安装和配置指南-JuniperNetworks.PDF-优快云博客

该文档是Juniper Networks SSG20安全产品的硬件安装和配置指南，适用于商业环境。它包含了关于设备合规性的FCC声明，指出设备可能产生的射频能量，并提醒用户如果在住宅区使用可能会引起干扰，需自行解决。文档还强调规格可能随时变更，且公司不承担更新信息的责任。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

安全产品

SSG 20 硬件安装和配置指南

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, CA 94089

USA

408-745-2000

编号: 530-015646-01-SC，修订本 02

Juniper Networks and the Juniper Networks logo are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other

trademarks, service marks, registered trademarks, or registered service marks in this document are the property of Juniper Networks or their respective

owners. All specifications are subject to change without notice. Juniper Networks assumes no responsibility for any inaccuracies in this document or for

any obligation to update information in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication

without notice.

FCC Statement

The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. The equipment generates, uses, and can radiate radio-frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense.

The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency

energy. If it is not installed in accordance with Junip