西北农林科技大学计算机真题,2015年最新西北农林科技大学大学计算机网络技术模拟试题及答案.doc...

2015年最新西北农林科技大学大学计算机网络技术模拟试题及答案

一1、数据通信技术

2、网络应用

3、4

4、不同

5、信号

6、传输介质

7、第三层交换机

8、网络软件

9、路由选择

10、80

1 C

2??B 3 A 4 A 5 B 6 D

7 D 8 C 9 D 10 C

11 A 12 D 13 B 14 D

15 B 16 B 17 B 18 C

19 B 20 A ?三F F T F T T F F F T

installation and the cable wiring, and GIS and the network control real estate cabinet installation and the cable wiring, and boiler room, and steam room instrument tube laying, and boiler room, and steam room Bridge frame installation and the cable laying, and unit electric dust equipment installation, and cycle pump room equipment, and pipeline installation and the paint, and unit chemical water system equipment and the pipeline

installation and the cable wiring, and GIS and the network control real estate cabinet installation and the cable wiring, and boiler room, and steam room instrument tube laying, and boiler room, and steam room Bridge frame installation and the cable laying, and unit electric dust equipment installation, and cycle pump room equipment, and pipeline installation and the paint, and unit chemical water system equipment and the pipeline

installation and the cable wiring, and GIS and the network control real estate cabinet installation and the cable wiring, and boiler room, and steam room instrument tube laying, and boiler room, and steam room Bridge frame installation and the cable laying, and unit electric dust equipment installation, and cycle pump room equipment, and pipeline installation and the paint, and unit chemical water system equipment and the pipeline

<think>好的,我需要帮助用户了解如何在Cadence Virtuoso中创建参数化单元(pCell)时,让参数的数值带有单位。首先,我得回忆一下Virtuoso中pCell的基本概念和操作流程。 用户的问题是关于参数数值带单位的设置,这可能涉及到参数定义时的属性设置。我记得在Virtuoso的pCell开发中,通常使用Skill语言来编写代码,定义参数和生成几何图形。这时候,参数的单位可能需要在参数声明时指定,或者在代码中处理单位转换。 首先,我需要确认在Virtuoso的pCell参数定义中是否有直接支持单位的选项。例如,在定义参数时,是否可以设置参数的类型为带有单位的数值,如长度、宽度等,这样用户在输入数值时自动附带单位。或者是否需要通过Skill代码在内部处理单位,比如将用户输入的值转换为数据库单位(DBU)。 接下来,考虑用户可能的使用场景。例如,用户希望创建一个电阻的pCell,参数包括长度和宽度,单位可能是微米(um)。用户希望在参数输入框中输入数值时,可以直接输入“10u”而不是单独输入数值10,然后选择单位。这时候,参数的定义需要能够解析带有单位的字符串,并将其转换为数据库单位。 然后,我需要查阅相关文档或示例代码,确认Skill语言中如何处理带单位的参数。例如,可能需要在参数定义中使用特定的类型,或者在代码中使用字符串处理函数来提取数值和单位,然后进行单位转换。比如,使用parseString函数来分割数值和单位,再根据单位转换为DBU。 另外,还要考虑单位的一致性。Virtuoso的默认数据库单位通常是微米,所以如果用户输入“10n”,即10纳米,就需要将10除以1000转换为微米。这需要在Skill代码中处理不同单位的转换,比如检查单位后缀(u, n, p等),并进行相应的数值缩放。 可能的步骤包括: 1. 在pCell的参数定义中,将参数类型设置为字符串,允许用户输入带有单位的数值。 2. 在Skill代码中解析这些字符串,提取数值部分和单位部分。 3. 根据单位进行数值转换,将用户输入的值转换为数据库单位(微米)。 4. 使用转换后的数值来生成几何图形。 例如,在参数定义时,可以有一个参数W,用户输入“5u”,代码解析出5和单位u,转换为5微米。如果用户输入“500n”,则转换为0.5微米。 同时,需要注意错误处理,比如用户输入了无效的单位或格式不正确的情况,这时候需要给出提示或者默认使用某种单位。 可能还需要参考Cadence官方文档或社区资源,确认是否有内置的函数或方法可以直接处理带单位的参数输入,避免重复造轮子。例如,是否有类似pcDefineParameter的函数,其中可以指定参数的单位类型,或者是否有现成的单位转换函数可用。 总结起来,解决方案的大致步骤可能如下: - 定义参数时允许字符串输入,提示用户输入数值和单位(如“10u”)。 - 在生成pCell的Skill代码中,解析每个参数字符串,分离数值和单位。 - 根据单位后缀(u, n, m等)进行单位转换,将数值转换为数据库单位(微米)。 - 使用转换后的数值进行几何图形的绘制。 此外,可能还需要提供示例代码,帮助用户更好地理解实现方法。例如,展示如何定义一个处理带单位参数的函数,并在pCell的代码中调用该函数进行转换。 最后,需要考虑用户的实际操作流程,确保步骤清晰,避免遗漏关键点,比如如何在Virtuoso的pCell编辑器中设置参数属性,或者在Skill代码中何处插入单位转换的逻辑。</think>在Cadence Virtuoso中创建参数化单元(pCell)时,若需要让参数的数值附带单位(如`1u`、`50n`),可通过以下步骤实现: --- ### **步骤1:定义参数时允许单位输入** 在pCell参数定义中,将参数类型设为**字符串(string)**,允许用户输入数值+单位组合(如`10u`、`0.5n`): ```skill pcDefinePCell( list(ddGetObj("lib") "resistor" "layout") ( (w "10u" "string") ; 宽度参数,默认值"10u" (l "20u" "string") ; 长度参数,默认值"20u" ) ; ... 后续代码 ) ``` --- ### **步骤2:解析参数中的单位** 在Skill代码中,编写函数解析字符串,提取数值和单位,并转换为数据库单位(DBU,默认微米): ```skill /* 单位转换函数 */ (defun ParseValueWithUnit (str @optional (defaultUnit "u")) (let (value unit scaledValue) ; 正则表达式提取数值和单位(如"5u" → 5和"u") (when (setq value (parseString str "[0-9.]+")) (setq unit (parseString str "[a-zA-Z]+")) (setq unit (if unit (lowerCase unit) defaultUnit)) ; 单位转换(按微米基准) (case unit ("u" (scaledValue = atof(value) * 1.0)) ; 微米 → 微米 ("n" (scaledValue = atof(value) * 0.001)) ; 纳米 → 微米 ("m" (scaledValue = atof(value) * 1000.0)) ; 毫米 → 微米 (t (scaledValue = atof(value))) ; 默认单位 ) scaledValue ) ) ) ``` --- ### **步骤3:在pCell代码中使用转换后的值** 在生成几何图形时,调用上述函数将带单位的字符串转换为纯数值(以微米为单位): ```skill (let (w l) ; 解析参数并转换为微米 (setq w (ParseValueWithUnit w)) (setq l (ParseValueWithUnit l)) ; 生成矩形(示例) (rodCreateRect( ?layer "M1" ?bBox list(0:0 w:l) )) ) ``` --- ### **关键点** 1. **参数类型**:必须使用`string`类型,允许用户输入数值+单位。 2. **单位兼容性**:确保代码支持常见单位(如`u`/`n`/`m`),并在转换时统一为数据库单位。 3. **错误处理**:可添加校验逻辑,若用户输入无效格式(如`5x`),则报错或使用默认值。 --- ### **示例用法** 用户输入参数时: - `w = "5u"` → 解析为5微米 - `l = "200n"` → 解析为0.2微米 通过此方法,pCell的参数输入将直观支持单位,同时代码自动完成单位转换,确保设计准确性。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值