debian调整swap交换空间并开机自动挂载

最新推荐文章于 2025-02-02 18:16:03 发布

转载最新推荐文章于 2025-02-02 18:16:03 发布 · 539 阅读

0 ·

CC 4.0 BY-SA版权

原文链接：http://www.cnblogs.com/light-zhang/p/9923084.html

文章标签：

#5g

本文详细介绍了在Linux系统中配置Swap分区的过程，包括获取root权限、创建Swap文件夹及文件、转换为Swap空间、挂载及自动挂载设置等关键步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

1.获取root

light@root:~$ su
密码：

2.创建swap文件夹

mkdir /opt/swap

3.创建初始化swap的空间大小 count=5G 这里要从新分配大小,要等待几分钟

dd if=/dev/zero of=/opt/swap/swapfile bs=1024 count=5000000

4.转换成swap文件

mkswap /opt/swap/swapfile

5.挂载或取消挂载

挂载：  swapon /opt/swap/swapfile
卸载：  swapoff /opt/swap/swapfile

6.free -h查看分区大小

root@root:/home/light# free -h
              total        used        free      shared  buff/cache   available
Mem:            11G         10G        170M        191M        668M        371M
Swap:           12G        244M         12G

7.开机启动后自动挂载swap,编辑/ets/tstab文件,添加如下红色内容就可以了

root@root:/home/light# nano /etc/fstab

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation

UUID=e9a5c5e0-b57f-4afe-ad25-d13905a48a1b / ext4 errors=remount-ro 0 1
# /home was on /dev/sda8 during installation
UUID=3d6a9e10-7a1d-4927-9b4b-0e436075b748 /home ext4 defaults 0 2
# /tmp was on /dev/sda7 during installation
UUID=f571c2e6-e5fe-4647-a46f-82997a609279 /tmp ext4 defaults 0 2
# /var was on /dev/sda5 during installation
UUID=0f2c8ca9-ddf1-4f87-bc7f-a5f31781945d /var ext4 defaults 0 2
# swap was on /dev/sda6 during installation
UUID=714af2b7-eaff-422d-9db0-e2b4a16cf8b3 none swap sw 0 0
/opt/sawp/swapfile swap swap defaults 0 0

转载于:https://www.cnblogs.com/light-zhang/p/9923084.html