部署LVS-DR集群

设置Proxy代理服务器的VIP和DIP

[root@proxy ~]# cd /etc/sysconfig/network-scripts
[root@proxy network-scripts]# cp ifcfg-eth0{,:0}
[root@proxy network-scripts]# vim ifcfg-eth0:0
TYPE=Ethernet
BOOTPROTO=none
DEFROUTE=yes
NAME=eth0:0
DEVICE=eth0:0
ONBOOT=yes
IPADDR=192.168.4.15
PREFIX=24
[root@proxy network-scripts]# service network restart 

设置Web1服务器网络参数

[root@web1 ~]# nmcli connection modify eth0 ipv4.method manual \
ipv4.addresses 192.168.4.100/24 connection.autoconnect yes
[root@web1 ~]# nmcli connection up eth0
[root@web1 ~]# cd /etc/sysconfig/network-scripts/
[root@web1 ~]# cp ifcfg-lo{,:0}
[root@web1 ~]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.4.15
NETMASK=255.255.255.255
NETWORK=192.168.4.15
BROADCAST=192.168.4.15
ONBOOT=yes
NAME=lo:0
[root@web1 ~]# vim /etc/sysctl.conf
#手动写入如下4行内容
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_announce = 2
#当有arp广播问谁是192.168.4.15时，本机忽略该ARP广播，不做任何回应
#本机不要向外宣告自己的lo回环地址是192.168.4.15
[root@web1 ~]# sysctl -p

设置Web2服务器网络参数

[root@web2 ~]# nmcli connection modify eth0 ipv4.method manual \
ipv4.addresses 192.168.4.200/24 connection.autoconnect yes
[root@web2 ~]# nmcli connection up eth0

[root@web2 ~]# cd /etc/sysconfig/network-scripts/
[root@web2 ~]# cp ifcfg-lo{,:0}
[root@web2 ~]# vim ifcfg-lo:0
DEVICE=lo:0
IPADDR=192.168.4.15
NETMASK=255.255.255.255
NETWORK=192.168.4.15
BROADCAST=192.168.4.15
ONBOOT=yes
NAME=lo:0

[root@web2 ~]# vim /etc/sysctl.conf
#手动写入如下4行内容
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_announce = 2
#当有arp广播问谁是192.168.4.15时，本机忽略该ARP广播，不做任何回应
#本机不要向外宣告自己的lo回环地址是192.168.4.15
[root@web2 ~]# sysctl -p

[root@web2 ~]# systemctl restart network

 

转载于:https://www.cnblogs.com/ray-mmss/p/10192471.html