centos7安装wine1.8

本文提供了详细的步骤来安装Wine 1.8版本,包括通过源代码安装所需的依赖包、下载并提取Wine源文件、使用EPEL仓库简化安装过程等。同时还介绍了如何配置和运行Wine来执行Windows程序。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Installing Wine 1.8 Using Source Code

Step 1: Installing Dependency Packages

We need to install ‘Development Tools‘ with some core development tools such gccflexbison,debuggers etc. these software’s are must required to compile and build new packages, install them using YUM command.

# yum -y groupinstall 'Development Tools'
# yum -y install libX11-devel libxml2-devel libxslt-devel freetype-devel flex bison

Note: On Fedora 22+ versions, yum package manager no longer in use, you should use dnf instead yum in the command below.

# dnf -y groupinstall 'Development Tools'
# dnf -y install libX11-devel libxml2-devel libxslt-devel freetype-devel flex bison

Read more about Learn dnf command with these 27 examples.

Step 2: Downloading Wine 1.8

Download the source file using Wget command under /tmp directory as a normal User.

$ cd /tmp
$ wget http://dl.winehq.org/wine/source/1.8/wine-1.8.tar.bz2
Step 3: Extracting Wine 1.8

Once the file is downloaded under /tmp directory, use the below commands to extract it.

$ tar -xvf wine-1.8.tar.bz2 -C /tmp/
Step 4: Installing Wine 1.8

It is recommended to compile and build Wine installer as a normal User. Run the following commands as normal user.

Note : The installer might take up-to 20-30 minutes and in the middle it will ask you to enter rootpassword.

$ cd wine-1.8/
$ ./tools/wineinstall

Install Wine Using EPEL Repository

Note: If you don’t want to mess with these all source code compilation and installation, there is an easy way using epel repository, but the available version of wine bit older.

Let’s first install and enable EPEL repository to install wine as shown:

# yum install epel-release
# yum install wine

Once the installation completes run the “winecfg” configuration tool from KDE or GNOME desktop to see the supported configuration. If you don’t have any of the desktop, you can install it by using the below command as root user.

# yum groupinstall "X Window System" "GNOME Desktop Environment"
OR
# yum groupinstall "X Window System" "KDE (K Desktop Environment)"

# yum groupinstall "GNOME Desktop"        [On CentOS 7]

# yum groupinstall "Server with GUI"      [On RHEL 7]

Once the X Window System installed, run the command as normal user to see wine configuration.

$ winecfg

Winecfg Configuration

Winecfg Configuration

Step 5: Running Wine 1.8

To run the Wine, you must specify the full path to the executable program or program name as shown in example below.

--------- On 32-bit Systems ---------
$ wine notepad
$ wine c:\\windows\\notepad.exe
--------- On 64-bit Systems ---------
$ wine64 notepad
$ wine64 c:\\windows\\notepad.exe

Wine Running Windows Programs on Linux

Wine Running Windows Programs on Linux

Wine is not perfect, because while using wine we see so many programs crashes. I think wine team will soon fix all bugs in their upcoming version and meanwhile do share your comments using our below form.


转载于:https://my.oschina.net/u/2279209/blog/606903

<think>好的,用户遇到了缺失libgcrypt.so.11的问题,我需要帮他们解决这个问题。首先,我要理解这个问题的原因。libgcrypt是一个加密库,版本11.so文件缺失可能是因为系统没有安装对应的库,或者安装的版本不对。 接下来,我应该考虑常见的解决方法。可能的情况包括:用户使用的是较新的Linux发行版,而软件需要旧版本的库;或者库文件被误删,或者安装不完整。不同的发行版有不同的包管理工具,比如Ubuntu/Debian用apt,CentOS/Fedora用yum或dnf,Arch用pacman,需要分别处理。 用户可能不太清楚自己的系统版本,所以需要指导他们如何检查系统信息。例如,通过lsb_release -a或者cat /etc/os-release来获取发行版信息。然后根据不同的系统推荐相应的安装命令。 另外,有时候库文件可能存在于系统中,但路径不对,或者符号链接有问题。这时候可能需要使用find或者ldconfig来查找或更新库的链接。如果用户安装的是正确的包,但仍然找不到,可能需要手动创建符号链接,但这一步需要谨慎,避免系统不稳定。 还有一种可能是用户需要运行某个特定的软件,而这个软件依赖旧版本的库。这时候可能需要添加第三方仓库,比如EPEL或者PPA,来获取所需的包。如果官方仓库没有,可能需要手动下载.deb或.rpm包进行安装,或者从源代码编译,但这可能会比较复杂,特别是对于新手来说。 用户可能对终端命令不太熟悉,所以需要给出具体的命令示例,并提醒他们在操作前备份系统,或者使用sudo权限。同时,需要注意安全性,推荐从官方源安装,避免从不可信的来源下载库文件。 如果上述方法都不奏效,可能需要考虑容器化解决方案,比如使用Docker来运行依赖旧库的应用程序,这样可以在容器中封装所有依赖,而无需修改宿主机系统。这对于维护系统稳定性和安全性也是一个好方法。 最后,总结一下步骤:先确定系统发行版,然后根据发行版安装对应的库,检查库是否存在,处理符号链接,考虑第三方仓库或容器化方案。需要以清晰、逐步的方式呈现解决方案,避免技术术语过多,让用户容易理解和操作。</think>以下是解决 `libgcrypt.so.11` 缺失问题的完整指南: --- ### **问题诊断** - **错误提示**:`libgcrypt.so.11 => not found` - **根源**:系统缺少 GNU 加密库 (libgcrypt) 的 1.5.x 版本 - **影响范围**:依赖该版本库的软件(如旧版VPN工具、Wine应用等) --- ### **解决方案矩阵** #### **1. 通用修复流程** ```bash # 检查现有版本 ldconfig -p | grep libgcrypt # 清理残留配置 sudo apt-get update --fix-missing # Debian/Ubuntu sudo yum clean all # CentOS/RHEL # 全系统搜索 sudo find / -name "libgcrypt*" 2>/dev/null ``` #### **2. 分发行版处理** | 系统类型 | 安装命令 | 验证方法 | |----------------|--------------------------------------------------------------------------|------------------------------| | **Ubuntu/Debian** | `sudo apt-get install libgcrypt20=1.5.3-2+deb8u4` (需启用旧源) | `dpkg -l libgcrypt20` | | **CentOS 7** | `sudo yum install https://vault.centos.org/7.9.2009/os/x86_64/Packages/libgcrypt-1.5.3-14.el7.x86_64.rpm` | `rpm -qa | grep libgcrypt` | | **Fedora** | `sudo dnf install compat-libgcrypt11` | `ldd /path/to/your/app` | | **Arch Linux** | 从 AUR 安装:`yay -S libgcrypt15` | `pacman -Ql libgcrypt15` | #### **3. 手动编译安装 (适用于所有系统)** ```bash wget https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.5.3.tar.bz2 tar -xvf libgcrypt-1.5.3.tar.bz2 cd libgcrypt-1.5.3 ./configure --prefix=/usr/local/libgcrypt11 make -j$(nproc) sudo make install # 添加库路径 echo "/usr/local/libgcrypt11/lib" | sudo tee /etc/ld.so.conf.d/libgcrypt11.conf sudo ldconfig ``` --- ### **替代方案** #### **符号链接应急方案(存在风险)** ```bash # 查找现有高版本库 find /usr/lib* -name "libgcrypt.so*" # 示例:将1.8版本链接为1.11(需谨慎!) sudo ln -s /usr/lib/x86_64-linux-gnu/libgcrypt.so.20.2.4 /usr/lib/libgcrypt.so.11 ``` #### **容器化方案** ```bash # 使用 Docker 封装旧环境 docker run -it --name oldapp \ -v /path/to/app:/app \ ubuntu:16.04 \ /bin/bash -c "apt-get update && apt-get install -y libgcrypt11 && /app/your_program" ``` --- ### **版本兼容性对照表** | 库版本 | 对应软件版本 | 兼容系统 | |------------|---------------------------|------------------------| | 1.5.x | libgcrypt.so.11 | Ubuntu 14.04, CentOS 6 | | 1.6.x | libgcrypt.so.20 | Ubuntu 16.04 | | 1.8.x | libgcrypt.so.22 | Ubuntu 18.04+ | --- ### **疑难排查** 1. **混合安装冲突** 现象:`multiple definition` 错误 处理: ```bash sudo updatedb locate libgcrypt | xargs sudo rm -f sudo apt-get install --reinstall libgcrypt20 ``` 2. **32/64不匹配** 检查架构一致性: ```bash file /usr/lib/libgcrypt.so.11 # 查看库架构 file /path/to/your_program # 查看程序架构 ``` --- ### **预防措施** 1. 使用虚拟环境: ```bash virtualenv --system-site-packages oldapp_env source oldapp_env/bin/activate pip install <your-package> ``` 2. 设置库优先级: ```bash echo "/opt/old_libs" | sudo tee /etc/ld.so.conf.d/oldlibs.conf sudo ldconfig -v ``` --- 通过上述方法可系统性地解决该依赖问题。建议优先采用容器化方案以确保系统稳定性,若需长期使用旧库,建议创建专用环境隔离新老版本库。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值