部署Symantec Antivirus 10.0网络防毒服务器之七

最新推荐文章于 2020-04-18 16:52:51 发布

转载最新推荐文章于 2020-04-18 16:52:51 发布 · 87 阅读

CC 4.0 BY-SA版权

原文链接：http://blog.51cto.com/liangsww/129137

如何将 Symantec AntiVirus 企业版客户端从不接受管理更改为接受管理

情形
将 Symantec AntiVirus Corporate Edition (Symantec AV) 10.0 作为不接受管理的客户端进行了安装。您想要将它更改为接受管理的客户端。

解释
从父服务器将Grc.dat 文件复制到想要管理的客户端。<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

注意： 若将客户端移入一个客户端组，请在下面的步骤中用 Grcgrp.dat 代替 Grc.dat 。

在父服务器上定位 Grc.dat 文件：

如果父服务器采用的是 Windows NT 操作系统，那么应从父服务器上的 VPHOME 共享文件夹复制 Grc.dat 文件。默认情况下，共享文件夹指向父服务器上的 <OS Drive>:\Program Files\NAV。

注意： 如果 Symantec AV 是从 Norton AntiVirus Corporate Edition 7.x 升级的，那么默认文件夹是 <OS drive>:\Program Files\NAV\ 。

如果父服务器采用的是 NetWare 操作系统，则应从 SYS:NAV 文件夹下复制 Grc.dat 文件。<?xml:namespace prefix = v ns = "urn:schemas-microsoft-com:vml" />

将 Grc.dat 文件复制到客户端：

Windows 98/Me 客户端，应将 Grc.dat 文件复制到客户端上 Symantec AV 的安装文件夹下。Windows 95/98 客户端的默认文件夹为：
C:\Program Files\Symantec_Client_Security\Symantec AntiVirus
如果程序是从 Norton AntiVirus 企业版升级的，默认文件夹为：
C:\Program Files\Norton AntiVirus
Windows NT 客户端，请将Grc.dat 文件复制到下面的文件夹：
<<?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />
OS Drive
>:\WINNT\Profiles\All Users\Application Data\Symantec\Norton AntiVirus Corporate Edition\7.5
对于 Windows 2000 或 XP 客户端，必须将 Grc.dat 文件复制到以下文件夹：
<
OS Drive
>:\Documents and Settings\All Users\Application Data\Symantec\Norton AntiVirus Corporate Edition\7.5

注意：

- 在 Windows 2000 中，Application Data 文件夹是隐藏的。要显示隐藏和系统文件，请阅读文档：如果显示 Windows 中的隐藏文件和受保护的操作系统文件（英文）。
- 如上所示，Symantec AV 10.0 在一些操作系统上使用文件夹：
  \Norton AntiVirus and \Norton AntiVirus Corporate Edition\7.5

几分钟后， Symantec AV 客户端就会在此文件夹下找到 Grc.dat 文件。 Symantec AV 会在对注册表进行适当的更改后删除该文件。下次客户端向父服务器登记时，就会显示在 SSC 中。通过停止、然后启动客户端上的 Symantec AV 客户端服务或重新启动计算机，强制执行登记。

-------------------------------------------------------

全文完！

附件下载：
　　

如何恢复Symantec防病毒服务器10.1

上一篇部署Symantec Antivirus 10.0网络防毒服务器之六　　下一篇 New Concept English Book One--lesson one to..

类别：Security ┆ 技术圈( 1) ┆ 阅读( 4041) ┆ 评论( 19) ┆ 推送到技术圈 ┆ 返回首页

相关文章

文章评论

[1楼]

[匿名]小单

2007-03-28 15:32:40

我这里是校园网内部,所以所有客户端不能直接访问外网站点,就是只能通过内部进行升级~~内部我通过设置FTP的方式已经下载到本地了,所有客户端的配置也都配置过了~~~~客户端能更新了~~但旧的病毒定义没有更新~~却显示说是已经是最新的了~~怎么解决??
是不是我选择更新的产品不对啊??10.0的版本基本需要的更新是哪些啊???

短消息通知评论者

[2楼]

dengmis

2007-04-18 19:30:02

Dear:Reking
非常之感谢你写这篇文章，请问可不可以加一点实例（如当客户机出现中毒时有情况）

短消息通知评论者

[3楼]

dengmis

2007-04-18 19:50:47

Dear redking
请问在NT如何有清除W32.Netsky.P@mm!enc
这个病毒

短消息通知评论者

[4楼]

redking

2007-04-20 08:09:36

建议部署个Symantec Mail Security for Microsoft Exchange

短消息通知评论者

[5楼]

dengmis

2007-04-20 17:33:24

但是我的microsoft exchnage　是域来的

短消息通知评论者

[6楼]

redking

2007-04-21 15:31:34

是的，现在公司的局域网都已经部署了AD

短消息通知评论者

[7楼]

[匿名]dengmis

2007-04-21 20:09:25

我现在还用的ＮＴ4.0　ＳＥＲＶＥＲ　所以还没有部署ＡＤ
ＥＸｃｈａｎｇｅ还是５．５今天才计划升级，但现在遇到这个病毒不知道怎样清除，请教了

短消息通知评论者

[8楼]

[匿名]dengmis

2007-04-21 20:09:26

短消息通知评论者

[9楼]

redking

2007-04-24 10:03:56

Discovered: May 5, 2004
Updated: February 13, 2007 12:22:41 PM
Also Known As: W32.Netsky.P@mm
Type: Worm
Systems Affected: Windows 2000, Windows 95, Windows 98, Windows Me, Windows NT, Windows XP

The following instructions pertain to all current and recent Symantec antivirus products, including the Symantec AntiVirus and Norton AntiVirus product lines.

Disable System Restore (Windows Me/XP).
Update the virus definitions.
Run a full system scan and delete all the files detected as W32.Netsky.P@mm!enc.

For specific details on each of these steps, read the following instructions.

1. Disabling System Restore (Windows Me/XP)
If you are running Windows Me or Windows XP, we recommend that you temporarily turn off System Restore. Windows Me/XP uses this feature, which is enabled by default, to restore the files on your computer in case they become damaged. If a virus, worm, or Trojan infects a computer, System Restore may back up the virus, worm, or Trojan on the computer.

Windows prevents outside programs, including antivirus programs, from modifying System Restore. Therefore, antivirus programs or tools cannot remove threats in the System Restore folder. As a result, System Restore has the potential of restoring an infected file on your computer, even after you have cleaned the infected files from all the other locations.

Also, a virus scan may detect a threat in the System Restore folder even though you have removed the threat.

For instructions on how to turn off System Restore, read your Windows documentation, or one of the following articles:
"How to disable or enable Windows Me System Restore"
"How to turn off or turn on Windows XP System Restore"
For additional information, and an alternative to disabling Windows Me System Restore, see the Microsoft Knowledge Base article, "Antivirus Tools Cannot Clean Infected Files in the _Restore Folder," Article ID: Q263455.

2. Updating the virus definitions
Symantec Security Response fully tests all the virus definitions for quality assurance before they are posted to our servers. There are two ways to obtain the most recent virus definitions:

Running LiveUpdate, which is the easiest way to obtain virus definitions: These virus definitions are posted to the LiveUpdate servers once each week (usually on Wednesdays), unless there is a major virus outbreak. To determine whether definitions for this threat are available by LiveUpdate, refer to the Virus Definitions (LiveUpdate).
Downloading the definitions using the Intelligent Updater: The Intelligent Updater virus definitions are posted on U.S. business days (Monday through Friday). You should download the definitions from the Symantec Security Response Web site and manually install them. To determine whether definitions for this threat are available by the Intelligent Updater, refer to the Virus Definitions (Intelligent Updater).

The Intelligent Updater virus definitions are available: Read "How to update virus definition files using the Intelligent Updater" for detailed instructions.

3. Scanning for and deleting the infected files
Start your Symantec antivirus program and make sure that it is configured to scan all the files.
For Norton AntiVirus consumer products: Read the document, "How to configure Norton AntiVirus to scan all files."
For Symantec AntiVirus Enterprise products: Read the document, "How to verify that a Symantec Corporate antivirus product is set to scan all files."
Run a full system scan.
If any files are detected as infected with W32.Netsky.P@mm!enc, click Delete.

Writeup By: Kaoru Hayashi

短消息通知评论者

[10楼]

[匿名]dengmis

2007-05-14 12:04:38

ＴＨＡＮＫＳ

短消息通知评论者

[11楼]

[匿名]dengmis

2007-05-25 09:56:43

DEAR redking
　　　如何在重装Symantec Antivirus 10.0服务器后继续管理原来的客户端

短消息通知评论者

[12楼]