本文介绍如何使用Python的pcapy库进行网络数据包捕获。文章首先列出可用设备，并允许用户选择要监听的设备。此外，还详细解析了抓取的数据包，包括以太网帧、IP包、TCP/UDP/ICMP协议等内容。
http://www.binarytides.com/code-a-packet-sniffer-in-python-with-pcapy-extension/
Code a packet sniffer in python with pcapy extension
Pcapy
In the previous articles we coded packet sniffers in python using raw sockets. Now lets use the libpcap library for the same. Libpcap is the packet capture library for linux and has wrappers for most languages. In python there are multiple libpcap wrappers like pcapy, pypcap etc. In this article we shall use the pcapy python module.
Pcapy is a Python extension module that interfaces with the libpcap packet capture library. Pcapy enables python scripts to capture packets on the network.
Project website :
http://oss.coresecurity.com/projects/pcapy.html
On ubuntu pcapy can be installed directly from synaptic by issuing the following command
$ sudo apt-get install python-pcapy Code
Lets code our sniffer right away.
'''
Packet sniffer in python using the pcapy python library
Project website
http://oss.coresecurity.com/projects/pcapy.html
'''
import socket
from struct import *
import datetime
import pcapy
import sys
def main(argv):
#list all devices
devices = pcapy.findalldevs()
print devices
#ask user to enter device name to sniff
print "Available devices are :"
for d in devices :
print d
dev = raw_input("Enter device name to sniff : ")
print "Sniffing device " + dev
'''
open device
# Arguments here are:
# device
# snaplen (maximum number of bytes to capture _per_packet_)
# promiscious mode (1 for true)
# timeout (in milliseconds)
'''
cap = pcapy.open_live(dev , 65536 , 1 , 0)
#start sniffing packets
while(1) :
(header, packet) = cap.next()
#print ('%s: captured %d bytes, truncated to %d bytes' %(datetime.datetime.now(), header.getlen(), header.getcaplen()))
parse_packet(packet)
#Convert a string of 6 characters of ethernet address into a dash separated hex string
def eth_addr (a) :
b = "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x" % (ord(a[0]) , ord(a[1]) , ord(a[2]), ord(a[3]), ord(a[4]) , ord(a[5]))
return b
#function to parse a packet
def parse_packet(packet) :
#parse ethernet header
eth_length = 14
eth_header = packet[:eth_length]
eth = unpack('!6s6sH' , eth_header)
eth_protocol = socket.ntohs(eth[2])
print 'Destination MAC : ' + eth_addr(packet[0:6]) + ' Source MAC : ' + eth_addr(packet[6:12]) + ' Protocol : ' + str(eth_protocol)
#Parse IP packets, IP Protocol number = 8
if eth_protocol == 8 :
#Parse IP header
#take first 20 characters for the ip header
ip_header = packet[eth_length:20+eth_length]
#now unpack them :)
iph = unpack('!BBHHHBBH4s4s' , ip_header)
version_ihl = iph[0]
version = version_ihl >> 4
ihl = version_ihl & 0xF
iph_length = ihl * 4
ttl = iph[5]
protocol = iph[6]
s_addr = socket.inet_ntoa(iph[8]);
d_addr = socket.inet_ntoa(iph[9]);
print 'Version : ' + str(version) + ' IP Header Length : ' + str(ihl) + ' TTL : ' + str(ttl) + ' Protocol : ' + str(protocol) + ' Source Address : ' + str(s_addr) + ' Destination Address : ' + str(d_addr)
#TCP protocol
if protocol == 6 :
t = iph_length + eth_length
tcp_header = packet[t:t+20]
#now unpack them :)
tcph = unpack('!HHLLBBHHH' , tcp_header)
source_port = tcph[0]
dest_port = tcph[1]
sequence = tcph[2]
acknowledgement = tcph[3]
doff_reserved = tcph[4]
tcph_length = doff_reserved >> 4
print 'Source Port : ' + str(source_port) + ' Dest Port : ' + str(dest_port) + ' Sequence Number : ' + str(sequence) + ' Acknowledgement : ' + str(acknowledgement) + ' TCP header length : ' + str(tcph_length)
h_size = eth_length + iph_length + tcph_length * 4
data_size = len(packet) - h_size
#get data from the packet
data = packet[h_size:]
print 'Data : ' + data
#ICMP Packets
elif protocol == 1 :
u = iph_length + eth_length
icmph_length = 4
icmp_header = packet[u:u+4]
#now unpack them :)
icmph = unpack('!BBH' , icmp_header)
icmp_type = icmph[0]
code = icmph[1]
checksum = icmph[2]
print 'Type : ' + str(icmp_type) + ' Code : ' + str(code) + ' Checksum : ' + str(checksum)
h_size = eth_length + iph_length + icmph_length
data_size = len(packet) - h_size
#get data from the packet
data = packet[h_size:]
print 'Data : ' + data
#UDP packets
elif protocol == 17 :
u = iph_length + eth_length
udph_length = 8
udp_header = packet[u:u+8]
#now unpack them :)
udph = unpack('!HHHH' , udp_header)
source_port = udph[0]
dest_port = udph[1]
length = udph[2]
checksum = udph[3]
print 'Source Port : ' + str(source_port) + ' Dest Port : ' + str(dest_port) + ' Length : ' + str(length) + ' Checksum : ' + str(checksum)
h_size = eth_length + iph_length + udph_length
data_size = len(packet) - h_size
#get data from the packet
data = packet[h_size:]
print 'Data : ' + data
#some other IP packet like IGMP
else :
print 'Protocol other than TCP/UDP/ICMP'
print
if __name__ == "__main__":
main(sys.argv) Output
$ sudo python pcapy_sniffer.py
['eth0', 'usbmon1', 'usbmon2', 'usbmon3', 'usbmon4', 'usbmon5', 'usbmon6', 'usbmon7', 'any', 'lo']
Available devices are :
eth0
usbmon1
usbmon2
usbmon3
usbmon4
usbmon5
usbmon6
usbmon7
any
lo
Enter device name to sniff : eth0
Sniffing device eth0
Destination MAC : 00:1c:c0:f8:79:ee Source MAC : 6c:fd:b9:53:6a:21 Protocol : 8
Version : 4 IP Header Length : 5 TTL : 250 Protocol : 17 Source Address : 61.1.96.71 Destination Address : 192.168.1.101
Source Port : 53 Dest Port : 56291 Length : 136 Checksum : 28619
stackexchangecom?ny
o@"we?mns3
serverfault?%?mns1?N?mns2?N
Destination MAC : 6c:fd:b9:53:6a:21 Source MAC : 00:1c:c0:f8:79:ee Protocol : 8
Version : 4 IP Header Length : 5 TTL : 64 Protocol : 1 Source Address : 192.168.1.101 Destination Address : 61.1.96.71
Type : 3 Code : 3 Checksum : 23788
stackexchangecom?G?e5???o???socketsny
o@"we?mns3
serverfault?%?mns1?N?mns2?N First the script would list out the available devices and then ask the user to enter the name of the device that is to be sniffed. Alternatively lookupdev function can be used to find a sniffable device without asking user to select anything.
The packet contents are also broken down and parsed. The script can parse only TCP/UDP/ICMP packets.
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
